1. Bubuka
This manual provides detailed instructions for the proper installation, operation, and maintenance of the Commscope EWSH-52 Waveguide Snap-in Hanger Kit. This kit is designed to securely mount elliptical waveguides, ensuring stable and reliable performance in various environmental conditions. Please read this manual thoroughly before proceeding with installation.
2. Émbaran Kasalametan
- Always wear appropriate personal protective equipment (PPE) during installation, including gloves and eye protection.
- Pastikeun sadaya alat dina kaayaan anu saé sateuacan dianggo.
- Do not exceed the specified cable weight capacity for the hanger.
- Verify the mounting surface is structurally sound and capable of supporting the hanger and waveguide assembly.
- Turutan sadaya peraturan sareng pedoman kaamanan lokal.
3. Komponén produk
The Commscope EWSH-52 Waveguide Snap-in Hanger Kit consists of two primary components:
- Logam Clamp: A silver-colored, U-shaped metal bracket designed to provide structural support and secure attachment.
- Rubber Insert: A black, cylindrical rubber bushing that fits within the metal clamp, providing cushioning and a snug fit for the elliptical waveguide.
This image displays the two primary components of the Commscope EWSH-52 Waveguide Snap-in Hanger Kit: a silver-colored metal clamp designed to secure the waveguide, and a black, cylindrical rubber insert that provides cushioning and a snug fit for the waveguide within the clamp.
4. Spésifikasi
| Atribut | Nilai |
|---|---|
| Jenis produk | Hanger kit |
| Tipe Kabel | Elliptical waveguide |
| Cables per Hanger | 1 |
| Warna | pérak |
| Jenis Gantungan | Snap-in hanger |
| Pamasangan | 3/4 in through hole |
| Jangkungna | 40.894 mm | 1.61 di |
| Lebar | 59.944 mm | 2.36 di |
| Panjangna | 89.916 mm | 3.54 di |
| Diaméterna cocog, maksimum | 34.798 mm | 1.37 di |
| Diaméterna cocog, minimum | 30.988 mm | 1.22 di |
| Ukuran Waveguide | WR159 | WG13 | R58 |
| Return Loss Effect | 0.1 dB |
| DTF Effect | 0.1 dB |
| Jenis Bahan | Beusi sténless |
| Vibration Survival | ≥4 hours at resonant frequency |
| Suhu Operasi | -40 ° C nepi ka +85 ° C (-40 ° F nepi ka +185 ° F) |
| Résistansi korosi | ≥500 hours in salt spray chamber |
| Environmental Strength Capability | Double cable weight |
| kuantitas bungkusan | 10 |
| Beurat, kasar | 1.6 kg | 3.527 lb |
| Pamatuhan pangaturan | ISO 9001:2015 |
| Dimensi produk | 4 x 2 x 2 inci |
| Produsén | CommScope / Amphenol |
| ASIN | B00QU9J38K |
| Nomer modél barang | EWSH-52 |
| Tanggal Kahiji Sadia | 1 Séptémber 2025 |
5. Setup jeung Instalasi
Follow these steps for proper installation of the EWSH-52 Waveguide Snap-in Hanger Kit:
- Identipikasi Lokasi Pasang: Select a suitable, structurally sound mounting surface that can support the weight of the waveguide and hanger.
- Nyiapkeun Lubang Pasang: Create a 3/4 inch through-hole at the desired mounting point. Ensure the hole is clean and free of debris.
- Insert Rubber Bushing: Carefully place the black rubber insert into the silver metal clamp. Ensure it is seated correctly and securely within the clamp.
- Position Waveguide: Gently guide the elliptical waveguide into the opening of the rubber bushing. The snap-in design allows for easy insertion while providing a firm grip.
- Secure Hanger: Align the hanger assembly with the prepared 3/4 inch through-hole. Use appropriate fasteners (not included) to secure the hanger firmly to the mounting surface. Ensure the hanger is tight and does not wobble.
- Pariksa Kaamanan: After installation, visually inspect the hanger and waveguide to ensure they are securely mounted and the waveguide is properly supported without undue stress.
6. Operasi
The Commscope EWSH-52 Waveguide Snap-in Hanger is a passive component designed to provide continuous support and secure positioning for elliptical waveguides. Once installed, it functions by:
- Securing Waveguide: The snap-in design of the rubber insert firmly holds the waveguide, preventing movement and vibration.
- Geter Dampening: The rubber insert helps to absorb vibrations, protecting the waveguide from mechanical stress and potential damage.
- Perlindungan Lingkungan: Constructed from stainless steel and designed for a wide operating temperature range and corrosion resistance, the hanger ensures long-term reliability in various outdoor and indoor environments.
No active user interaction is required after proper installation.
7. Pangropéa
The Commscope EWSH-52 Waveguide Snap-in Hanger Kit is designed for minimal maintenance. However, periodic inspection is recommended to ensure optimal performance and longevity:
- Inspeksi Visual: Periodically check the hanger and waveguide for any signs of physical damage, corrosion, or loosening.
- Pariksa tightness: Ensure that the mounting fasteners remain tight and secure. Re-tighten if necessary, but do not overtighten.
- Kabersihan: If installed in dusty or dirty environments, gently clean the hanger and surrounding area to prevent accumulation that could affect performance or material integrity.
- Rubber Insert Integrity: Inspect the rubber insert for cracks, hardening, or degradation. Replace if any significant wear is observed to maintain proper waveguide cushioning and grip.
8. Cara ngungkulan
Most issues related to the EWSH-52 hanger are typically due to improper installation or environmental factors. Consider the following:
- Waveguide Movement/Slippage:
- Ensure the rubber insert is correctly seated within the metal clamp.
- Verify the waveguide diameter is within the compatible range (30.988 mm to 34.798 mm).
- Check if the mounting fasteners are sufficiently tightened.
- Inspect the rubber insert for wear or damage; replace if necessary.
- Hanger Loosening from Mounting Surface:
- Re-tighten the mounting fasteners.
- Inspect the mounting surface for degradation or structural issues.
- Ensure appropriate fasteners were used for the mounting material.
- Corrosion on Metal Clamp:
- While designed for corrosion resistance, extreme environments can accelerate wear. Clean the surface and apply a protective coating if needed, ensuring it does not interfere with the waveguide or rubber.
- Consider environmental shielding if corrosion is severe and persistent.
9. Garansi jeung Rojongan
For specific warranty information regarding the Commscope EWSH-52 Waveguide Snap-in Hanger Kit, please refer to the terms and conditions provided at the point of purchase or contact Commscope directly. This product is manufactured under an ISO 9001:2015 quality management system.
For technical support or further assistance, please visit the official Commscope website or contact their customer service department. When contacting support, please have your product model number (EWSH-52) and any relevant purchase details available.
Pabrikan: CommScope / Amphenol
