Bogen 1126-BG-UTI1

Bogen 1126-BG-UTI1 Single Zone Paging Controller User Manual

Model: 1126-BG-UTI1

1. Bubuka

The Bogen 1126-BG-UTI1 is a single-zone paging controller designed to integrate a paging system with a telephone system. It provides a reliable interface for making announcements over a public address system from a telephone. This manual provides detailed instructions for the proper installation, operation, and maintenance of your Bogen paging controller.

2. Émbaran Kasalametan penting

Mangga baca sareng pahami sadaya pitunjuk kaamanan sateuacan ngoperasikeun alat ieu. Simpen manual ieu kanggo rujukan ka hareup.

3. Eusi Paket

Pastikeun yén sadaya item aya dina bungkusan:

4. Produk Langkungview

The Bogen 1126-BG-UTI1 features various ports and indicators for seamless integration and operation. Familiarize yourself with the unit's components before installation.

Bogen Single Zone Paging Controller front view kalayan port sareng indikator

Gambar 1: Hareupeun view of the Bogen Single Zone Paging Controller. This image displays the main unit, highlighting its compact design and essential connection points for audio input and output, as well as power. The various ports and indicators are visible, crucial for understanding the device's functionality and connectivity.

4.1 Panel payun

4.2 Panel tukang

5. Setup jeung Instalasi

Follow these steps to properly install your paging controller:

  1. Pamasangan: Choose a suitable location for the controller, away from excessive heat or moisture. Secure the unit using appropriate mounting hardware if desired.
  2. Connect to Telephone System: Connect an RJ-11 cable from your telephone system's paging port or a suitable analog extension to the "Telephone Line Input" on the controller. Consult your telephone system's manual for specific paging port details.
  3. Nyambung ka Amppanguat: Connect the "Audio Output" of the paging controller to an available input on your paging amplifier. Ensure correct polarity if using screw terminals.
  4. Sambungkeun Kakuatan: Plug the provided power adapter into the "Power Input" jack on the controller, then plug the adapter into a standard electrical outlet. The Power LED should illuminate.
  5. Initial Level Adjustment: Start with the Input Level and Output Level controls set to their minimum positions.

6. Parentah Operasi

Once installed, the Bogen 1126-BG-UTI1 is ready for operation.

6.1 Making a Page

  1. From a telephone connected to the system, dial the designated paging access code or extension.
  2. Wait for the confirmation tone or voice prompt from the paging controller.
  3. Speak clearly into the telephone handset to make your announcement.
  4. Hang up the telephone when finished.

6.2 Nyaluyukeun Tingkat Audio

7. Pangropéa

The Bogen 1126-BG-UTI1 is designed for reliable operation with minimal maintenance.

8. Cara ngungkulan

Upami anjeun ngalaman masalah, tingali pituduh ngungkulan masalah ieu:

MasalahMungkin Cukang lantarananaSolusi
No power indicator light.Power adapter not connected or faulty; no power at outlet.Check power adapter connection. Verify outlet has power. Test with another adapter if available.
No paging audio.Incorrect telephone system connection; amplifier off or muted; audio levels too low.Verify telephone line and audio output connections. Ensure amplifier is on and not muted. Adjust Input and Output Level controls.
Paging audio is distorted.Input or output levels set too high.Reduce Input Level and/or Output Level controls.
Cannot access paging from telephone.Incorrect paging access code; telephone system not configured correctly.Confirm the correct paging access code with your telephone system administrator. Verify telephone system programming.

If the problem persists after attempting these solutions, contact Bogen technical support.

9. Spésifikasi

FiturRincian
Nomer modél1126-BG-UTI1
merekBogen
Ukuran Paket15 x 9 x 7 inci
Item Beurat6.7 pon
ASINB00P1AOL2C
ProdusénBogen
Paging ZonesZona Tunggal
KasaluyuanTelephone systems with analog paging port or extension

10. Garansi jeung Rojongan

Bogen products are designed for durability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Bogen websitus. Dukungan téknis sayogi pikeun ngabantosan patarosan atanapi masalah naon waé anu anjeun tiasa pendak.

Dokumén Patali - 1126-BG-UTI1

Praview Bogen MCP35A Master Control Panel: instalasi tur Paké Manual
Manual ieu nyadiakeun instalasi lengkep, operasi, jeung spésifikasi teknis pikeun Bogen MCP35A Master Control Panel, sistem serbaguna pikeun komunikasi dua arah jeung distribusi program di sagala rupa lingkungan.
Praview Bogen UTI312 Zona Controller & Pamasangan Antarmuka Telepon Universal sareng Manual Pamakéan
Pamasangan sareng pamakean manual pikeun Bogen UTI312 Zona Controller sareng Universal Telephone Interface, ngajéntrékeun fitur-fiturna, setelan, sareng tungtunan operasional pikeun sistem paging sareng sinyal multi-zona.
Praview Bogen TPU Series Telephone Paging Amplifiers: Installation and Use Manual
Comprehensive installation and use manual for Bogen TPU35B, TPU60B, TPU100B, and TPU250 telephone paging amplifiers, covering setup, wiring, operation, and specifications.
Praview Loudspeaker Bogen IH8A Reentrant Horn - Spesifikasi Produk sareng Pamasangan
Rincian lengkep ngeunaan Loudspeaker Bogen IH8A Reentrant Horn, kalebet fitur-fiturna, spésifikasi téknis, pituduh pemasangan sareng pamasangan, sareng inpormasi garansi terbatas.
Praview Bogen VAR1 Voice-Activated Relay: Technical Specifications and Operation
Detailed specifications, installation, operation, and warranty information for the Bogen VAR1 Voice-Activated Relay, a DPDT relay device for audio signal activation and muting.
Praview Pituduh Konfigurasi Kontroler Input/Output Nyquist Bogen NQ-E7010
This guide provides comprehensive instructions for configuring the Bogen NQ-E7010 Nyquist Input/Output Controller. Learn to manage network settings, update firmware, access logs, and ensure secure access with the Bogen Digital Certification Authority.