1. Bubuka
Thank you for choosing the iBeam TE-CSC Chrome Push-in Camera. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new vehicle backup camera. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
The iBeam TE-CSC is designed to enhance parking accuracy and help avoid obstacles when reversing, offering a wide 170-degree view. Its durable, water-resistant chrome housing ensures longevity and a sleek appearance.
2. Émbaran Kasalametan
- Salawasna pegatkeun sambungan batré kandaraan urang saméméh ngalakukeun pagawean listrik pikeun nyegah sirkuit pondok tur shock listrik.
- Ensure all wiring is properly insulated and secured to prevent damage from vibration, heat, or moisture.
- Ulah ngahalangan supir urang view or interfere with the operation of any vehicle controls or safety features during installation.
- This camera is an aid for reversing and parking; it does not replace the need for careful driving and direct observation of surroundings.
- Taroskeun ka pamasangan profésional upami anjeun henteu yakin ngeunaan bagian mana waé tina prosés pamasangan.
3. Eusi Paket
Mangga parios pakét kanggo barang-barang ieu:
- iBeam TE-CSC Chrome Push-in Camera
- 22.5mm liang Saw
- Kabel listrik
- 20-foot Video Cable (RCA type)
- Instruksi Manual
Image 1: iBeam TE-CSC Chrome Push-in Camera with its main components, including the camera unit, power cable, video cable, and hole saw.
4. Setup jeung Instalasi
The iBeam TE-CSC camera is designed for a push-in installation, typically above the rear license plate, mimicking an OEM camera setup. The camera is pre-set at a 45-degree angle for optimal viewing.
- Pilih Lokasi Pasang: Identify a suitable flat surface above the rear license plate where the camera can be flush-mounted. Ensure there is enough space behind the mounting surface for the camera body and wiring.
- liang bor: Use the included 22.5mm hole saw to drill a precise hole at the chosen mounting location. Ensure the hole is clean and free of burrs.
- Selapkeun kaméra: Carefully push the camera into the drilled hole until it sits flush with the mounting surface. Ensure the camera's lens is oriented correctly (facing downwards and outwards).
- Sambungkeun Kakuatan: Connect the camera's power cord to the vehicle's reverse light circuit. This will ensure the camera activates automatically when the vehicle is put into reverse. Connect the red wire to the positive (+) lead of the reverse light and the black wire to a chassis ground (-).
- Sambungkeun kabel video: Route the 20-foot RCA video cable from the camera to your compatible monitor or head unit. Ensure the cable is securely routed away from moving parts, heat sources, and sharp edges. Connect the yellow RCA connector from the camera to the video input of your monitor.
- Sistem tés: Reconnect the vehicle's battery. Turn on the vehicle and engage reverse gear to test the camera's functionality. Adjust the camera's position slightly if needed (though it's fixed at 45 degrees, ensure the housing is seated correctly).
Catetan: For vehicles with complex wiring or if you are uncomfortable with electrical connections, professional installation is recommended.
5. Parentah Operasi
The iBeam TE-CSC camera operates automatically in conjunction with your vehicle's reverse gear and compatible monitor.
- Aktip otomatis: When the vehicle's transmission is shifted into reverse, the camera will automatically power on and transmit video to the connected monitor.
- Viewdina Angle: The camera provides a wide 170-degree field of view, offering a comprehensive perspective of the area behind your vehicle.
- Bantuan parkir: Use the displayed image on your monitor to assist with parking maneuvers and to identify obstacles that may not be visible in your mirrors.
- Nonaktipkeun: When the vehicle is shifted out of reverse, the camera will automatically power off, and your monitor will return to its previous display mode.
6. Pangropéa
To ensure the longevity and clear performance of your iBeam TE-CSC camera, follow these simple maintenance guidelines:
- Ngabersihan lensa: Périodik ngabersihan lénsa kaméra ku lemes, damp cloth to remove dirt, dust, or water spots. Avoid abrasive cleaners or materials that could scratch the lens.
- Inspeksi Perumahan: Regularly inspect the camera housing for any signs of damage or loose connections. The chrome finish is designed to withstand elements, but extreme conditions may require more frequent checks.
- Cék kabel: Ensure all cables remain securely connected and are not exposed to excessive tension or abrasion.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| No image on monitor when in reverse. |
|
|
| Gambar robah warna atawa kedip-kedip. |
|
|
| Camera lens is foggy or blurry. |
|
|
8. Spésifikasi
| Nomer modél | TE-CSC |
| merek | iBeam |
| Produsén | iBeam USA |
| Dimensi produk | 40.5 x 17 x 8.5 inci (diménsi bungkusan/pangiriman) |
| Item Beurat | 3.76 pounds (packaging/shipping weight) |
| Téhnologi sénsor optik | CMOS |
| Ukuran Sénsor Optik | 1/4 inci |
| Tipe Lénsa | Fixed, Wide Angle |
| Sudut nyata tina View | 170 darajat |
| Widang Of View | 170 darajat |
| Tipe Pamasangan | Surface Mount (Push-in) |
| Tipe Panyambung | RCA |
| Alat nu cocog | Ngawaskeun |
| Fitur Témbongkeun séjén | Wireless (Note: This might refer to compatibility with wireless video transmitters, but the product includes a 20ft video cable, implying wired connection for this specific model. Clarification needed if "Wireless" refers to a feature of the camera itself or a compatible accessory.) |
9. Garansi jeung Rojongan
For warranty information and technical support, please contact iBeam USA directly. Details are typically provided with your product packaging or can be found on the official iBeam USA websitus.
When contacting support, please have your product model number (TE-CSC) and purchase date available.
