Somfy Universal RTS Interface II (URTS II) User Manual

1. Bubuka

This manual provides essential information for the safe and efficient use of your Somfy Universal RTS Interface II (URTS II). Please read these instructions carefully before installation and operation. Keep this manual for future reference.

The Somfy Universal RTS Interface II is designed to integrate Somfy RTS (Radio Technology Somfy) motorized products with third-party control systems, offering 16 channels of control. It allows for seamless automation and enhanced control over your motorized window coverings, awnings, and other RTS-enabled devices.

2. Produk Langkungview

The Somfy Universal RTS Interface II (URTS II) acts as a bridge between your Somfy RTS motors and various home automation systems. It receives commands from a third-party controller (e.g., RS232, RS485, or contact closure) and translates them into RTS radio signals to operate your Somfy motorized products.

Figure 2.1: Somfy Universal RTS Interface II (URTS II) device. This image shows the compact white rectangular unit with the Somfy logo.

Fitur konci:

• 16 independent RTS channels for controlling multiple devices or groups.
• Multiple input options for integration with various control systems.
• Desain kompak pikeun instalasi gampang.
• Enables advanced automation scenarios when paired with a compatible home automation hub.

3. Setup & Instalasi

Pamasangan anu leres penting pisan pikeun kinerja anu optimal. Disarankeun yén pamasangan dilakukeun ku profésional anu mumpuni.

3.1. Eusi Paket

• Somfy Universal RTS Interface II (URTS II) unit
• Power Adapter (if included with your model)
• Pamasangan hardware
• Ieu instruksi manual

Gambar 3.1: Kelample of a Somfy power adapter. Ensure you use the correct power supply for your device.

3.2. Mounting the Interface

1. Choose a suitable location for the interface, ideally centrally located within the range of your RTS devices and near your control system.
2. Ensure the location is dry, protected from extreme temperatures, and away from potential sources of radio interference.
3. Use the provided mounting hardware to securely attach the interface to a wall or other stable surface.

3.3. Wiring sareng Sambungan

• Sambungan Daya: Connect the power adapter to the interface and plug it into a standard electrical outlet.
• Control System Connection: Connect your third-party control system to the appropriate input ports on the URTS II (e.g., RS232, RS485, or contact closure terminals). Refer to your control system's manual for specific wiring diagrams.
• anteneu: Ensure the RTS antenna is properly positioned for optimal signal transmission. Avoid coiling the antenna or placing it near large metal objects.

3.4. Programming RTS Motors

The URTS II must be programmed to control your RTS motors. This typically involves putting the motor into programming mode and then sending a programming command from the URTS II or a connected control system. Consult the specific programming instructions for your Somfy RTS motor and your third-party control system.

For programming with the TaHoma switch, refer to the following video tutorial:

4. Operasi

Once the Somfy Universal RTS Interface II is properly installed and programmed, operation is typically managed through your connected third-party control system. The URTS II translates commands from your control system into RTS signals to operate your motorized products.

• Paréntah ngirim: Use your home automation system's interface (e.g., touchscreen, app, voice command) to send commands (Open, Close, My/Stop) to the specific RTS channels linked to your motors.
• Kontrol saluran: Each of the 16 channels on the URTS II can control an individual RTS motor or a group of RTS motors that have been programmed to that channel.
• "My" Position: The "My" button on RTS controls allows you to set a favorite intermediate position. This position can also be triggered via the URTS II if supported by your control system.

5. Pangropéa

The Somfy Universal RTS Interface II is designed for minimal maintenance. Follow these guidelines to ensure its longevity:

• beberesih: Clean the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Lingkungan: Ensure the unit remains in a dry environment, free from excessive dust, moisture, and extreme temperatures.
• Pembaruan firmware: Periodically check the Somfy website or your control system's documentation for any available firmware updates for the URTS II. Follow the instructions provided for updating.

6. Cara ngungkulan

If you experience issues with your Somfy Universal RTS Interface II, consult the following common troubleshooting steps:

If problems persist after attempting these steps, contact Somfy technical support or your installer.

7. Spésifikasi

• model: URTS II (Universal RTS Interface II)
• Nomer Bagian: 1810872
• Saluran kontrol: 16 RTS Channels
• ukuran: 3 x 1.75 x 4 inci (kira-kira)
• Beurat barang: 0.01 ons (kira-kira)
• Frékuénsi Radio: RTS (Téhnologi Radio Somfy)
• Masukan Voltage: (Vol husustage not provided, typically low voltage DC via adapter)
• Konektipitas: RS232, RS485, Contact Closure (check specific model for all available inputs)
• Suhu operasi: (Not provided, typically indoor residential range)

Note: Specifications are subject to change without notice. Refer to the product packaging or Somfy's official websitus kanggo inpormasi paling anyar.

8. Jaminan & Dukungan

Somfy products are designed and manufactured to the highest quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Somfy websitus.

Rojongan Palanggan:

If you require technical assistance, have questions about installation, or need to report a product issue, please contact Somfy customer support. Contact information can typically be found on the Somfy websitus atanapi dina bungkusan produk Anjeun.

Sumberdaya Online:

• Nganjang ka Somfy Store on Amazon pikeun émbaran produk.
• Refer to the official Somfy website for comprehensive documentation, FAQs, and support articles.