BLACK+DECKER 20V MAX 10-Inch Cordless Chainsaw (LCS1020) Instruction Manual

1. Émbaran Kasalametan penting

Always read and understand all safety warnings and instructions before operating the chainsaw. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.

Alat Pelindung Diri (APD)

• Perlindungan panon: Salawasna nganggo kacamata kaamanan atawa kacasoca pikeun ngajaga tina lebu ngalayang.
• Perlindungan leungeun: Wear heavy-duty work gloves for grip and protection.
• Perlindungan dédéngéan: Paké panyalindungan ceuli salila operasi.
• Perlindungan suku: Anggo sapatu anu kuat, henteu leueur.
• Perlindungan sirah: A safety helmet is recommended, especially when cutting overhead.

General Chainsaw Safety

• Jauhkeun sadaya bagian awak tina ranté ragaji nalika ragaji dioperasikeun.
• Salawasna tahan ragaji pageuh ku dua leungeun.
• Ensure the work area is clear of other persons, children, and pets.
• Do not operate a chainsaw when you are tired, ill, or under the influence of drugs or alcohol.
• Hindarkeun ngamimitian teu kahaja. Pastikeun saklar dina posisi pareum sateuacan nyelapkeun pak batré.
• Pakéan anu bener. Ulah maké pakéan leupas atawa perhiasan. Jauhkeun rambut, pakean, sareng sarung tangan anjeun tina bagian anu obah.
• Maintain a firm grip on the chainsaw with both hands when power is on.
• Be aware of kickback. Kickback may occur when the moving saw chain contacts an object at the upper tip of the guide bar.

2. Produk Langkungview

The BLACK+DECKER LCS1020 is a lightweight and efficient 20V MAX cordless chainsaw designed for light-duty cutting tasks such as pruning branches and cutting small logs. It features a 10-inch bar and chain, a tool-less chain tensioning system, and an automatic oiling system.

Gambar 1: Leuwihview of the BLACK+DECKER LCS1020 Chainsaw with key components labeled, including the oiling system, wrap-around handle, tool-free chain tensioning, and 10-inch bar and chain.

Komponén konci:

• Palang jeung Ranté 10 inci: Designed for smooth and fast cuts.
• 20V MAX* Lithium Battery: Provides long run-time and long life.
• Sistem Oiling Otomatis: Keeps the bar and chain lubricated during operation. It features a prime button on top of the oil cover to ensure proper lubrication.
• Tensioning Ranté tanpa alat: Allows for fast and easy adjustments without additional tools.
• Tombol konci: Prevents accidental starting for enhanced safety.
• Front Hand Guard: Protects the user from flying debris.
• Wrap-around Handle: Provides controlled vertical and horizontal cutting.

3. Setélan

Instalasi batré sareng Ngecas

1. Ensure the chainsaw is turned off and the safety lock is engaged.
2. Insert the 20V MAX lithium battery into the battery port until it clicks securely into place.
3. Pikeun ngahapus, pencét tombol leupaskeun dina batré sareng geser kaluar.
4. Charge the battery using the provided charger. Refer to the charger's instructions for charging times and indicators.

Figure 2: The 20V MAX lithium battery properly inserted into the chainsaw, demonstrating its power source.

Chain Installation (if required)

1. Pastikeun batréna dicabut pikeun kaamanan.
2. Remove the side cover by loosening the tool-less tensioning knob and disengaging the cover.
3. Carefully place the chain around the sprocket and guide bar, ensuring the cutting edges are facing the correct direction.
4. Reattach the side cover and lightly tighten the tensioning knob.

Filling Bar and Chain Oil

1. Cabut tutup oli anu aya di luhur gergaji mesin.
2. Fill the reservoir with appropriate bar and chain oil. Do not overfill.
3. Pasang deui tutup oli kalayan pageuh.
4. Before each use, and periodically during operation, press the prime button on the oil cover to ensure the bar and chain are adequately lubricated.

Figure 3: A hand carefully pouring bar and chain oil into the chainsaw's oil reservoir, highlighting the location of the oil cap.

Nyaluyukeun tegangan ranté

1. Pastikeun batréna dipiceun.
2. Loosen the large plastic screw (tool-less tensioning knob) by turning it one full turn counter-clockwise.
3. Adjust the bar left or right until there is approximately 1/8 inch of slack in the chainsaw blade.
4. Tighten the large plastic screw clockwise until the chain is taut but can still be moved freely by hand.

Figure 4: A hand demonstrating the tool-free chain tensioning system, ensuring simple and quick adjustments.

4. Parentah Operasi

Ngamimitian Chainsaw

1. Pastikeun batréna geus dicas pinuh tur dipasang bener.
2. Hold the chainsaw firmly with both hands, maintaining a balanced stance.
3. Press the lock-off button (safety switch) with your thumb.
4. Squeeze the trigger to start the saw chain. Release the lock-off button once the chain starts moving.

Téhnik motong

• Always ensure the saw chain is at full speed before making contact with the wood.
• Use the low-kickback bar and chain for smooth and controlled cuts.
• For branches, support the branch to prevent pinching the saw chain.
• When cutting logs, ensure they are stable and cannot roll.
• Periodically press the oil prime button during extended cutting to maintain lubrication.

Figure 5: The chainsaw in action, demonstrating its capability to cut through wood with sawdust visible.

5. Pangropéa

Pangropéa Umum

• Salawasna cabut batréna sateuacan ngalakukeun pangropéa naon waé.
• Keep the chainsaw clean and free of debris. Use a brush or compressed air to remove sawdust from the motor housing and chain area.
• Regularly check the chain tension and adjust as needed.
• Ensure the bar and chain oil reservoir is always filled with appropriate oil.

Asah ranté

The saw chain will eventually become dull with use. A dull chain will not cut efficiently and can cause excessive wear on the chainsaw. Sharpen the chain using a 4.5 mm round file. It is recommended to use a file guide to maintain correct angles.

6. Cara ngungkulan

7. Spésifikasi

• merek: HIDEUNG + DECKER
• Jumlah modél: LCS1020
• Sumber Daya: Batré Powered (20V MAX* Litium Ion)
• Panjang ranté: 10 inci
• Beurat barang: 6.8 pon
• Ukuran produk: 16.7 "L x 8.81" W x 9.63" H
• Batré: 1 batré Litium Ion diperlukeun (kaasup)

8. Garansi jeung Rojongan

For warranty information, technical support, or to purchase replacement parts, please contact BLACK+DECKER customer service or visit their official websitus. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.