Buku Panduan Kipas Dinding/Langit-langit 18 Inci Litex CWF18BNK3 Le Clerc

Bubuka

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Litex CWF18BNK3 Le Clerc's 18-Inch Wall/Ceiling Fan. Please read these instructions thoroughly before beginning installation or use, and retain this manual for future reference.

The Litex CWF18BNK3 is an 18-inch fan designed for both wall and ceiling mounting, featuring aluminum blades and a brushed nickel finish. It offers three speed settings and a quiet motor performance, making it suitable for various indoor spaces requiring air circulation.

Image: Litex CWF18BNK3 Le Clerc's 18-Inch Wall/Ceiling Fan, showcasing its brushed nickel finish and aluminum blades. The fan is mounted on a wall, highlighting its design and how it extends from the mounting base.

Émbaran Kasalametan

• Always disconnect power at the circuit breaker before installing, cleaning, or servicing the fan.
• Ensure all electrical connections comply with local codes and ordinances, as well as the National Electrical Code (NEC). If you are unfamiliar with electrical wiring, consult a qualified electrician.
• Mount the fan securely to a structural support capable of holding the fan's weight (approximately 16.23 pounds). For wall mounting, ensure adequate stud support.
• Keep hands, hair, and clothing away from moving fan blades to prevent injury.
• Entong ngoperasikeun kipas nganggo kabel listrik atanapi colokan anu ruksak.
• Kipas angin ieu dirarancang pikeun panggunaan jero rohangan wungkul.

Eusi pakét

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Litex CWF18BNK3 Le Clerc's 18-Inch Wall/Ceiling Fan unit
• Mounting hardware (typically included)
• Instruksi Manual

If any parts are missing or damaged, do not proceed with installation. Contact Litex customer service for assistance.

Setup sareng Instalasi

The Litex CWF18BNK3 fan is designed for versatile mounting on either a wall or ceiling. Due to its weight (approximately 16.23 pounds) and robust construction, secure mounting is crucial. For wall installations, it is recommended to mount the fan to multiple studs or use appropriate blocking to ensure stability. The fan includes a 30-inch wire length for electrical connection.

Determining Optimal Fan Placement

Consider the room size and desired airflow when choosing the mounting location. Refer to the general guidelines below for fan sizing:

Image: This chart provides guidance on selecting the correct fan blade span based on room size. It shows recommended blade spans for rooms up to 100 sq ft (36 in), up to 225 sq ft (42 in), up to 400 sq ft (52 in), and over 400 sq ft (56 in).

Parentah Wiring

1. Pareuman kakuatan dina pemutus sirkuit utama.
2. Connect the fan's electrical wires to the corresponding household wires according to local electrical codes.
3. Secure all wire connections with approved wire connectors.
4. Taliti keun sadaya kawat kana kotak simpang.
5. Attach the fan's mounting plate to the wall or ceiling support structure using the provided hardware.
6. Mount the fan unit to the mounting plate.
7. Balikkeun kakuatan dina circuit breaker.

Parentah Operasi

The Litex CWF18BNK3 fan features three speed settings and an oscillation function, controlled by knobs located on the fan's base.

Kontrol laju

Locate the speed control knob on the fan's base. Rotate the knob to select your desired airflow:

• rendah: Pikeun sirkulasi hawa anu lemes.
• Sedeng: Pikeun aliran hawa anu sedeng.
• luhur: For maximum air movement.

Fungsi Osilasi

The fan includes an oscillation feature to distribute air across a wider area. Locate the oscillation control knob on the fan's base. Turn this knob to activate or deactivate the oscillating motion.

Pangropéa

Pangropéa rutin ngajamin kinerja optimal sareng umur panjang kipas anjeun.

beberesih

• Before cleaning, ensure the fan is turned off and disconnected from the power supply.
• Ngagunakeun lemes, damp cloth to wipe down the exterior surfaces of the fan. Avoid abrasive cleaners or solvents that could damage the finish.
• Periodically clean dust from the fan blades and grille using a soft brush or vacuum cleaner attachment.
• Ulah neuleumkeun kipas dina cai atawa ngidinan cai netes kana perumahan motor.

Pamariksaan

• Regularly check all mounting hardware to ensure it remains secure.
• Inspect the power cord for any signs of damage, such as fraying or cuts. If damage is found, discontinue use and contact customer service.

Pamérésan masalah

Upami anjeun ngalaman masalah sareng kipas anjeun, tingali léngkah-léngkah ngungkulan masalah umum ieu:

• Kipas teu hurung: Ensure the power supply is connected and the circuit breaker is not tripped. Check that the speed control knob is not in the 'off' position.
• Aliran udara ngirangan: Clean any dust accumulation from the blades and grille. Ensure the fan is set to a higher speed if more airflow is desired.
• Noise kaleuleuwihan: Verify that all mounting hardware is tight and secure. Check for any obstructions around the fan blades.
• Osilasi teu jalan: Ensure the oscillation control knob is engaged. Check for any obstructions preventing the fan head from rotating.

If problems persist after attempting these steps, contact Litex customer service for further assistance.

spésifikasi

Garansi sareng Rojongan

The Litex CWF18BNK3 Le Clerc's 18-Inch Wall/Ceiling Fan comes with a limited lifetime warranty. For specific details regarding warranty coverage, parts, or any support inquiries, please contact Litex customer service at 800-527-1292.