Alto Professional TX15 User Manual

Bubuka

The Alto Professional TX15 is a 15-inch active 2-way PA loudspeaker designed for powerful and portable audio reproduction. Featuring efficient bi-amped Kelas D amplification, it delivers 600 watts of peak power. Its robust design includes a 15-inch low-frequency driver, a 1-inch high-frequency compression driver, and bass porting for extended low-end response. The TX15 is suitable for various applications, including live sound, DJ setups, and monitoring.

Émbaran Kasalametan penting

Always read and follow all safety instructions before operating this product. Keep these instructions for future reference.

• Cai sareng Uap: Entong nganggo alat ieu caket cai.
• Panas: Entong dipasang di deukeut sumber panas sapertos radiator, register panas, kompor, atanapi aparat sanésna (kalebet ampLiifiers) anu ngahasilkeun panas.
• Perlindungan Kabel-kabel: Nangtayungan kabel kakuatan tina keur leumpang dina atawa pinched.
• beberesih: Ngabersihan ngan ku kaén garing.
• Ventilasi: Ulah meungpeuk sagala bukaan ventilasi. Pasang saluyu sareng parentah produsén.
• Kantétan/Asesoris: Ngan anggo kantétan/aksésori anu ditunjuk ku produsén.
• kilat: Cabut colokan alat ieu nalika badai kilat atanapi nalika henteu dianggo kanggo waktos anu lami.
• Palayanan: Rujuk sadayana ngalayanan ka tanaga jasa anu mumpuni. Pelayanan diperyogikeun nalika aparat parantos rusak sagala cara.

Eusi Kotak

Pastikeun yén sadaya item anu didaptarkeun di handap kalebet kana pakét anjeun:

• TX15 Loudspeaker
• Guide pamaké
• Kabel Daya
• Manual Kasalametan & Garansi

Produk Leuwihview

The Alto Professional TX15 is a versatile active loudspeaker designed for various audio applications. Below are images illustrating its key features and connections.

Gambar 1: Hareupeun miring view of the Alto Professional TX15 loudspeaker, showcasing its robust grille and overall design.

Gambar 2: Rear panel of the Alto Professional TX15, detailing the input/output connections, volume control, power switch, and EQ contour switch.

Kontrol sareng Sambungan:

• XLR Line/Mic Input: For connecting audio sources such as mixers or microphones.
• Kaluaran Tautan XLR: Allows chaining multiple TX15 units together.
• Kontrol volume: Adjusts the overall output level of the speaker.
• Line/Mic Input Switch: Selects the appropriate input sensitivity for line-level or microphone-level signals.
• EQ Contour Switch: Engages or disengages a contour EQ setting for enhanced sound.
• Clip Limiter LED: Indicates when the input signal is clipping, suggesting a reduction in input volume.
• Ground lift switch: Helps eliminate hum or buzz caused by ground loops.
• Saklar kakuatan: Ngahurungkeun atanapi mareuman unit.
• Input kakuatan: Nyambungkeun kabel kakuatan kaasup.

Disetél

Follow these steps to set up your Alto Professional TX15 loudspeaker:

1. panempatan: Position the TX15 in your desired location. It can be used upright, as a wedge monitor, or mounted on a standard 36mm pole. Ensure stable placement to prevent tipping.
2. Setélan Volume Mimiti: Before connecting any audio sources, ensure the Volume control on the TX15 is set to its minimum (fully counter-clockwise) position.
3. Sambungkeun Sumber Audio:
   • For a mixer or other line-level device, connect an XLR cable from your source's output to the TX15's XLR Line/Mic Input. Nyetél Line/Mic Input Switch to "Line".
   • For a microphone, connect an XLR microphone cable directly to the TX15's XLR Line/Mic Input. Nyetél Line/Mic Input Switch to "Mic".
4. Sambungan Daya: Connect the included power cable to the TX15's Input kakuatan and then to a grounded electrical outlet.
5. Daya Hurung: Balikkeun Pindah kakuatan to the "On" position. The power LED will illuminate.
6. Saluyukeun Volume: Slowly increase the Volume control on the TX15 and on your audio source until the desired listening level is achieved. Monitor the Clip Limiter LED; if it illuminates frequently, reduce the input volume from your source or the TX15's volume to prevent distortion.
7. Chaining Multiple Units (Optional): To connect additional TX15 units, use an XLR cable from the first TX15's XLR Link Output ka nu XLR Line/Mic Input of the next TX15. Repeat for additional units.

Ngoperasikeun

Once set up, operating your TX15 is straightforward:

• Penyesuaian volume: Use the Volume control to fine-tune the speaker's output level.
• EQ Contour: Experiment with the EQ Contour switch to find the sound profile that best suits your audio content and environment. This can provide a subtle boost to certain frequencies for a fuller sound.
• Angkat taneuh: If you experience a persistent hum or buzz, try engaging the Ground Lift switch. This can help break ground loops that cause unwanted noise.
• Monitoring Clip LED: The red Clip Limiter LED indicates that the signal entering the speaker is too strong, potentially causing distortion. If this LED flashes frequently or stays lit, reduce the volume from your audio source or the TX15's volume control.

Pangropéa

Proper maintenance ensures the longevity and optimal performance of your TX15 loudspeaker:

• beberesih: Clean the exterior of the speaker with a soft, dry cloth. Do not use solvents, abrasive cleaners, or any liquids that could seep into the internal components.
• Ventilasi: Ensure that all ventilation openings are clear and unobstructed. Do not place the speaker in an enclosed space that restricts airflow.
• Panyimpenan: Lamun teu dipaké pikeun période nambahan, nyimpen speaker dina tiis, tempat garing, jauh ti sinar panonpoé langsung jeung hawa ekstrim.
• Pamariksaan kabel: Periodically inspect all cables (power and audio) for any signs of damage, fraying, or loose connections. Replace damaged cables immediately.

Pamérésan masalah

If you encounter issues with your TX15, refer to the following common problems and solutions:

spésifikasi

Detailed technical specifications for the Alto Professional TX15 loudspeaker:

• Tipe Sistim: Pengeras suara aktif 2 arah
• Supir LF: 15 "woofer, 2" coil sora
• Supir HF: 1” ferrite driver, 1” voice coil
• Amppanguat: Class D SMPS, 600 watts peak / 300 watts continuous
• Horn Coverage: 90 ° H x 45 ° V
• Tanggapan Frékuénsi: 65 Hz – 20,000 Hz (-3 dB)
• Frékuénsi Crossover: 2,200 Hz
• Max SPL: 119 dB dina 1 m
• EQ prasetél: Contour on/off
• Panyambung: 1 XLR Line/Mic input, 1 XLR Link output
• Kadali éksternal: Power switch with green LED, volume control, Line/Mic input switch, EQ contour switch, clip limiter red LED, ground lift switch
• Sasayogian tanaga: 100 V, 110-120 V, or 220-240 V; 50/60 Hz, switchable
• Konsumsi Daya: 260 W
• Sekering: 110-120V T4AL AC250V or 220-240V T2AL AC250V
• Perlindungan éléktronik: Thermal, overload, analog limiter, compressor
• Pangwangunan kandang: Plastic cabinet, trapezoidal and monitor shape, metal grille, rubber feet, 2 handles (both sides)
• Pamasangan: 36 mm standard pole mount
• Dimensions (height x width x depth): UKURAN 24.6" x 15.1" x 14.4"
• beurat: 32.8 pon

Gambar 3: Diagram illustrating the dimensions of the Alto Professional TX15 loudspeaker.

Garansi sareng Rojongan

This product comes with a limited warranty. Please refer to the included Safety & Warranty Manual for detailed terms and conditions.

For technical support, service, or warranty inquiries, please contact Alto Professional customer service. Contact information can typically be found on the Alto Professional website or in the Safety & Warranty Manual.

Pabrikan: inMusic Brands Inc.