Bubuka
This manual provides essential information for the setup, operation, and maintenance of your Texecom Veritas R8 Burglar Alarm Control Panel. This system is designed to provide reliable security for domestic or small office environments. Please read these instructions carefully before installation and use.
Image showing the Texecom Veritas R8 Burglar Alarm Control Panel. The main white unit is visible, with a smaller, hinged keypad unit attached below it. The keypad features numerical buttons (0-9), 'FULL', 'PART', 'PROG', 'RESET' buttons, and indicator lights for zones and system status.
Setup sareng Instalasi
The Texecom Veritas R8 is designed for wireless DIY installation. However, for optimal performance and to ensure correct programming, it is recommended to consult the full installation manual available from the manufacturer's website or seek assistance from a qualified professional.
Sambungan Keypad
The system supports connection of up to six backlit remote keypads. Ensure all keypads are securely connected according to the wiring diagrams provided in the comprehensive installation guide.
Konfigurasi Zona
The control panel features 8 fully programmable zones plus a tamper zone. Each zone must be configured to monitor specific areas or sensors within your property. Refer to the detailed programming instructions for zone setup.
Parentah Operasi
The Veritas R8 control panel provides intuitive operation through its integrated keypad.
Arming Sistim nu
- To FULL SET: Enter your user code, then press the FULL kancing.
- To PART SET: Enter your user code, then press the BAGIAN button. The system offers 2 programmable part-set suites.
Ngaleungitkeun Sistem
To disarm the system and silence the alarm, enter your user code.
Ngareset Sistim
After an alarm event, to reset the system, enter your user code, then press the RESET kancing.
Panic Alarm (PA)
A keypad Panic Alarm (PA) option is available. To activate, press buttons 3 jeung 9 together simultaneously.
Pangropéa
Regular maintenance ensures the longevity and reliability of your alarm system.
- Service Timers: The system includes date-programmable service timers to remind you when routine maintenance is due. Ensure these are set and adhered to.
- beberesih: Periodically wipe the control panel and keypads with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Pariksa batré: Although the main unit does not include batteries, ensure any connected wireless sensors or keypads with batteries are checked and replaced as per their individual instructions.
Pamérésan masalah
Should you encounter issues with your Veritas R8 control panel, consider the following:
- System Not Arming: Check all zones for open circuits or tamper conditions. Ensure all doors and windows are closed.
- Alarm palsu: Investigate potential causes such as faulty sensors, incorrect zone programming, or environmental factors.
- Anti-Code Reset: The system features a built-in anti-code reset function for specific fault conditions. Refer to the full manual for details on its use.
- Soak Test Suite: Utilize the soak test suite feature to thoroughly test the system's functionality and identify intermittent faults.
- Masalah kakuatan: Ensure the corded electric power source is stable and connected correctly.
For complex issues or programming difficulties, refer to the comprehensive installation and programming manual or contact technical support.
spésifikasi
| Produsén | Texecom |
| Nomer Bagian | CFC-0001 |
| Nomer Modél Item | CFC-0001 |
| Dimensi produk | 11.66 x 9.3 x 8.99 cm |
| Item Beurat | 1.78 kg |
| Warna | Bodas |
| Sumber Daya | Kabel Listrik |
| Métode Pamasangan | DIY Nirkabel |
| Item Paket Kuantitas | 1 |
| Batré Kaasup? | No |
| Batré Diperlukeun? | No |
| Zona | 8 fully programmable zones + tamper |
| Part-Set Suites | 2 tiasa diprogram |
| Keypad Support | Up to six backlit remote keypads |
Émbaran jaminan
Warranty terms and conditions for the Texecom Veritas R8 Burglar Alarm Control Panel are provided by the manufacturer. Please refer to the documentation included with your product or visit the official Texecom websitus pikeun inpormasi jaminan lengkep sareng prosedur pendaptaran. Simpen bukti pameseran anjeun pikeun klaim garansi.
Ngarojong
For technical assistance, programming queries, or further support, please contact Texecom customer service or consult their official website. Access to the full installation and programming manual is highly recommended for advanced configurations.
