Soundmaster FUR6100SI

Soundmaster Highline FUR6100SI Radio-Controlled Projection Alarm Clock User Manual

Model: FUR6100SI

1. Bubuka

Hatur nuhun pikeun meuliasing the Soundmaster Highline FUR6100SI Radio-Controlled Projection Alarm Clock. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and keep it for future reference.

This device features a radio function, time projection, energy-saving automatic display shutdown, a radio-controlled clock, and an infrared sensor, all housed in a sleek silver design.

2. Parentah Kasalametan

  • Baca sakabeh parentah taliti samemeh operasi alat.
  • Tetep manual pikeun rujukan hareup.
  • Ulah ngalaan alat ka hujan atawa Uap pikeun nyegah seuneu atawa shock listrik.
  • Mastikeun ventilasi ditangtoskeun; ulah ngahalangan sagala bukaan ventilasi.
  • Teundeun alat dina tempat nu datar, stabil.
  • Paké ngan kantétan / asesoris dieusian ku produsén.
  • Cabut colokan alat nalika badai kilat atanapi nalika henteu dianggo kanggo waktos anu lami.
  • Rujuk sadayana jasa ka tanaga jasa anu mumpuni.

3. Fitur Produk

The Soundmaster Highline FUR6100SI is equipped with advanced features for your convenience:

  • Automatic time and date setting via DCF-77 radio signal.
  • 120° rotatable and 180° adjustable time projection with switchable projection.
  • Automatic display shutdown and reactivation via infrared sensor.
  • Dual alarm with weekend function, snooze, and sleep function.
  • Date function and weekday display.
  • FM PLL radio with 10 preset stations.
  • Infrared sensor for contactless display switching and activation of sleep/snooze function.
  • 3-level LED display: high, medium, or low brightness.
  • Requires 1 CR2032 backup battery (not included).
Soundmaster Highline FUR6100SI Radio-Controlled Projection Alarm Clock
An image of the Soundmaster Highline FUR6100SI radio-controlled projection alarm clock, showing its silver casing, LED display, and control buttons. The projection lens is visible on the left side.

4. Setélan

4.1 Sambungan Daya

  1. Connect the power cable to the DC input port on the back of the alarm clock.
  2. Colokkeun tungtung kabel daya anu sanés ka stop kontak témbok standar.
  3. The display will light up, and the unit will begin searching for the DCF-77 radio signal for automatic time setting.

4.2 Pamasangan Batré Cadangan

A CR2032 button cell battery (not included) can be installed to provide backup power in case of a power outage, preserving time and alarm settings.

  1. Locate the battery compartment on the bottom or back of the unit.
  2. Buka panutup kompartemen batré.
  3. Insert one CR2032 battery, ensuring the correct polarity (+/-).
  4. Tutup panutup kompartemen batré aman.

5. Parentah Operasi

5.1 Automatic Time Setting (DCF-77)

Upon initial power-up, the clock will automatically attempt to synchronize with the DCF-77 radio signal. This process may take a few minutes. Ensure the clock is placed in an area with good reception, away from electronic interference.

5.2 adjustment kacaangan tampilan

The LED display has 3 brightness levels (high, medium, low). Use the dedicated button (often labeled 'DIMMER' or similar, or integrated into 'MODE' button presses) to cycle through the brightness settings.

5.3 Operasi Radio

  1. Press the 'RADIO' or 'MODE' button to switch to FM radio mode.
  2. Use the 'TUNE' or 'PRESET' buttons to scan for stations or select a preset.
  3. To save a station as a preset, tune to the desired station, then press and hold the 'PRESET' button until the preset number flashes. Use the 'TUNE' buttons to select a preset number, then press 'PRESET' again to confirm.

5.4 Setélan alarem

The device features a dual alarm system with weekend function, snooze, and sleep timer.

  1. Setting Alarm 1/2: Press and hold the 'ALARM 1' or 'ALARM 2' button. The hour display will flash. Use the 'HOUR' and 'MINUTE' buttons (often combined with 'TUNE' or 'SET') to set the desired alarm time. Press the 'ALARM' button again to confirm.
  2. Ngaktipkeun/Nonaktipkeun Alarm: Press the 'ALARM 1' or 'ALARM 2' button briefly to toggle the alarm on or off. An indicator icon will appear on the display when active.
  3. Fungsi Tungkul When the alarm sounds, press the 'SNOOZE' button (often a large button on top) to temporarily silence it. The alarm will sound again after a set interval (e.g., 9 minutes).
  4. Weekend Function: This function allows the alarm to be active only on weekdays. Refer to the specific button or menu option for 'WEEKEND' or '7/5 DAY' alarm settings.
  5. Fungsi Saré: Press the 'SLEEP' button to activate the sleep timer. The radio will play for a set duration (e.g., 15, 30, 60, 90 minutes) before automatically turning off. Press 'SLEEP' repeatedly to cycle through durations or turn off the sleep timer.

5.5 Time Projection

The integrated projector can display the time on a wall or ceiling.

  • Activating Projection: Locate the 'PROJECTION' button or switch. Press it to turn the projection on/off.
  • Adjusting Projection Angle: The projector lens can be rotated 120° and adjusted 180° to direct the time display to your desired surface.
  • Penyesuaian fokus: A small focus wheel near the projector lens allows you to sharpen the projected image.

5.6 Date and Weekday Display

Press the 'MODE' button repeatedly to cycle through time, date, and weekday displays.

5.7 Sénsor Infrabeureum

The infrared sensor allows for contactless control, such as reactivating the display after automatic shutdown or activating snooze/sleep functions with a hand wave.

6. Pangropéa

  • beberesih: Ngusap unit ku kaén anu lembut sareng garing. Ulah make cleaners abrasive atawa pangleyur.
  • Ngagantian batré: Replace the CR2032 backup battery annually or when the display shows signs of power loss during outages.
  • Panyimpenan: Upami nyimpen unit kanggo waktos anu lami, pegatkeun tina listrik sareng cabut batré cadangan.

7. Cara ngungkulan

MasalahMungkin Cukang lantarananaSolusi
No display/Unit not powering onKabel daya teu nyambung atanapi stop kontakna rusak.Pariksa sambungan kabel kakuatan. Coba outlet béda.
Waktos teu disetel sacara otomatisPoor DCF-77 signal reception or interference.Move the unit to a different location, away from other electronics. Allow more time for synchronization.
Alarm teu disadaAlarm teu diaktipkeun atanapi teu leres disetel.Ensure the alarm is turned on and the time is set correctly. Check volume settings for radio alarm.
panarimaan radio goréngAntenna not extended or local interference.Panjangkeun anteneu FM sapinuhna. Pindahkeun posisi unit pikeun panarimaan anu langkung saé.
Projected time is blurryFokus teu disaluyukeun.Adjust the focus wheel near the projection lens.

8. Spésifikasi

  • merek: Tukang sora
  • model: FUR6100SI
  • warna: pérak
  • Bahan: palastik
  • Ukuran produk (L x W x H): 5.3 x 18.3 x 9.6 cm
  • Beurat barang: 620 gram
  • Téknologi konektipitas: Pambantu
  • Téknologi Tuning: FM
  • Band Radio Dirojong: FM/PLL
  • Sumber Daya: Kabel Listrik
  • Fitur husus: Infrared Sensor, Automatic Time/Date Setting (DCF-77), 120°/180° Rotatable Projection Alarm Clock with Switchable Time Projection
  • Batré Cadangan: 1 x CR2032 (not included)
  • Komponén Kaasup: Soundmaster FUR6100SI silver unit

9. Garansi jeung Rojongan

Kanggo inpormasi garansi sareng dukungan palanggan, mangga tingali dokuméntasi anu disayogikeun sareng pameseran anjeun atanapi hubungi pangecér anjeun. Simpen bukti pameseran anjeun pikeun klaim garansi naon waé.