1. Bubuka
This manual provides essential information for the proper installation, operation, and maintenance of your Garmin Airmar B175M 010-11939-22 Transducer. The B175M is a high-performance, thru-hull transducer designed for marine applications, offering a 1 kilowatt power output and a depth capability of up to 1,700 feet. It operates within a medium-band frequency range of 85-135 kHz, providing excellent target separation and detail for various fishing and navigation needs.
2. Setup jeung Instalasi
Proper installation is crucial for the optimal performance of your B175M transducer. It is recommended that installation be performed by a qualified marine electronics technician.
2.1 Lokasi Pamasangan
The B175M is a thru-hull transducer, meaning it requires a hole to be drilled through the boat's hull. Select a location that is:
- Free from turbulence caused by propellers, keels, or other hull irregularities.
- Accessible for installation and maintenance.
- Away from electrical interference sources.
2.2 Léngkah-léngkah Pamasangan (Leuwihview)
- Prepare the Hull: Drill the appropriate size hole according to the transducer's shaft diameter. Ensure the hull surface is clean and dry.
- Larapkeun Sealant: Apply marine-grade sealant around the transducer shaft and mounting surfaces to ensure a watertight seal.
- Insert Transducer: Carefully insert the transducer through the hull from the outside.
- Secure Internally: From inside the hull, secure the transducer with the provided backing block and nut. Tighten securely, but do not overtighten.
- Kabel Jalur: Route the transducer cable to your compatible Garmin display unit, avoiding sharp bends and potential damage.
- Nyambung: Connect the transducer cable to the designated port on your Garmin fish finder or chartplotter.
3. Parentah Operasi
Once installed and connected to a compatible Garmin marine display, the B175M transducer will automatically begin transmitting and receiving sonar signals.
3.1 Operasi Dasar
- Daya Hurung: Ensure your Garmin display unit is powered on.
- Sonar View: Navigate to the sonar or fishfinder screen on your display.
- Pilihan Frékuénsi: The B175M operates in a medium-band CHIRP frequency range (85-135 kHz). Your display unit will typically manage this automatically, but you may have options to adjust the frequency range for specific target detection or water conditions.
- Maca Jero: The transducer will provide real-time depth readings and display underwater structures and fish targets.
- Keuntungan/Sensitipitas: Adjust the gain or sensitivity setting on your display to optimize the sonar image for clarity and target detection.
3.2 Pertimbangan Performance
The performance of the transducer can be affected by boat speed, hull design, and water conditions. Experiment with settings and observe the sonar returns to understand how your transducer performs in different environments.
4. Pangropéa
Pangropéa rutin ngajamin umur panjang sareng kinerja optimal transduser anjeun.
- beberesih: Periodically inspect the transducer face for marine growth, dirt, or other obstructions. Clean with a soft cloth and mild soap and water. Avoid abrasive cleaners or tools that could scratch the transducer surface.
- Pamariksaan: Check the transducer cable for any signs of wear, cuts, or damage. Ensure all connections are secure.
- Antifouling: If your boat is kept in water, apply a water-based antifouling paint specifically designed for transducers to prevent marine growth. Do not use solvent-based paints.
- Winterization: If storing your boat in freezing temperatures, ensure the transducer is not exposed to ice formation, which can cause damage.
5. Cara ngungkulan
If you experience issues with your transducer, review léngkah-léngkah ngungkulan masalah umum ieu:
- No Depth Reading:
- Check all cable connections between the transducer and the display unit.
- Ensure the display unit is powered on and configured correctly for the transducer.
- Inspect the transducer face for obstructions or marine growth.
- Verify the transducer is fully submerged in water.
- Poor Sonar Image/Interference:
- Adjust the gain/sensitivity settings on your display.
- Check for sources of electrical interference (e.g., engine, other electronics).
- Ensure the transducer is mounted in a location free from turbulent water flow.
- Clean the transducer face.
- Bacaan Intermittent:
- Pariksa sambungan kabel leupas.
- Pariksa kabel pikeun karuksakan.
- Ensure stable power supply to the display unit.
If problems persist after performing these checks, contact Garmin customer support or a certified marine electronics technician.
6. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| merek | Garmin |
| Ngaran modél | Garmin Airmar B175M 010-11939-22 Transducer |
| Nomer Bagian | 010-11939-22 |
| Kaluaran kakuatan | 1 kilowatt |
| Frékuénsi Operasi | 85-135 kHz (Medium CHIRP) |
| Maksimum Ngukur Jero | 1,700 suku (518 méter) |
| Tipe Pamasangan | Ngaliwatan Hull |
| Item Beurat | 10.9 Pon (4.94 kg) |
| Bahan | Plastic (Housing typically bronze for thru-hull) |
| UPC | 753759995768 |
7. Garansi jeung Rojongan
The Garmin Airmar B175M 010-11939-22 Transducer is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Garmin website. For technical assistance, troubleshooting beyond the scope of this manual, or warranty claims, please contact Garmin customer support directly.
Rojongan Garmin: www.garmin.com/support
