1. Bubuka
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Steinbach 040955 CPS 40-2 Filtration Pump. Please read these instructions carefully before using the pump to ensure proper function and longevity of the product. This pump is designed for filtering pool water up to approximately 19,000 liters capacity and is compatible with Steinbach Classic 300, Classic 250, and ActiveBalls+ filtration systems.
2. Parentah Kasalametan
Always observe the following safety precautions to prevent injury or damage to the pump.
- Kasalametan listrik: Ensure the power supply matches the pump's specifications (240 Volts). Always disconnect the pump from the power supply before performing any maintenance or cleaning. Do not operate the pump with a damaged power cord or plug.
- Kasalametan cai: Never operate the pump dry. Ensure the pump is fully primed with water before starting. Keep children and pets away from the pump during operation.
- panempatan: Install the pump on a stable, level surface. Ensure adequate ventilation around the pump to prevent overheating.
- Suhu: The pump is designed for water temperatures up to 35 degrees Celsius.
3. Produk Langkungview
The Steinbach 040955 CPS 40-2 is a robust filtration pump designed for efficient pool water circulation. It features a durable plastic housing and an electric cable power source. The pump is compact and operates quietly.
Gambar 3.1: Hareupeun view of the Steinbach 040955 CPS 40-2 Filtration Pump.
Gambar 3.2: Sisi view of the pump, showing the inlet and outlet connections.
Figure 3.3: Visual representation of the pump's dimensions, approximately 20 cm (8.2 inches) in height.
Figure 3.4: Product packaging displaying key specifications such as 230V/200W power, 6.5m max head, and 6000 l/h flow rate.
4. Setélan
Follow these steps for proper installation of your filtration pump:
- Ngabongkar bungkusan: Sacara saksama miceun sadaya komponén tina bungkusan. Mariksa karusakan naon waé.
- panempatan: Position the pump on a firm, level surface near your pool, ensuring it is protected from direct weather exposure and has adequate air circulation.
- Sambungan selang: Connect the appropriate hoses (32mm or 38mm diameter) to the pump's inlet and outlet ports. Ensure all connections are secure and watertight to prevent leaks.
- Priming: Before starting, ensure the pump is fully primed with water. This typically involves filling the pump housing with water until it overflows from the suction port.
- Sambungan listrik: Connect the pump to a grounded electrical outlet (240V). Ensure the circuit is protected by a Residual Current Device (RCD) for safety.
5. Operasi
Once the pump is set up and primed, you can begin operation:
- Mimitian pompa: Turn on the power supply to the pump. The pump should start circulating water immediately.
- Ngawaskeun: Observe the water flow and pressure. The pump operates quietly, indicating efficient performance.
- Waktu ngajalankeun: The optimal run time for your pump depends on your pool size and usage. Consult your pool system's guidelines for recommended daily filtration cycles.
- Pareuman: To turn off the pump, simply disconnect it from the power supply.
6. Pangropéa
Regular maintenance ensures the longevity and efficiency of your filtration pump:
- beberesih: Periodically clean the pump's exterior with a damp lawon. Ulah make bahan kimia kasar.
- Filter System Maintenance: This pump works in conjunction with a filtration system. Regularly clean or replace the filter cartridges or media as recommended by your filter system's manual.
- Winterization: If you live in an area with freezing temperatures, disconnect the pump and drain all water from it before winter. Store the pump in a dry, frost-free location.
- Inspeksi selang: Regularly check hoses and connections for wear, cracks, or leaks. Replace damaged components as needed.
7. Cara ngungkulan
Upami anjeun mendakan masalah sareng pompa anjeun, tingal masalah sareng solusi umum ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Pompa teu ngamimitian | Taya catu daya Motor overheating Impeller macét | Pariksa sambungan kakuatan sarta circuit breaker Hayu pompa tiis Disconnect power and inspect/clear impeller |
| Aliran cai lemah | Ngompa teu purun Saringan mampet bocor hawa dina garis nyeuseup | Pasang deui pompa Ngabersihan atawa ngaganti saringan Check all suction line connections for tightness |
| Pompa ribut | Hawa dina sistem Uing dina impeller Pompa ngalir garing | Ngaluarkeun hawa tina sistem Disconnect power and clear debris Ensure pump is primed and has continuous water supply |
8. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Produsén | Steinbach |
| Nomer modél | 040955 |
| Ukuran produk (L x W x H) | 22.5 x 15.5 x 33.5 cm (8.86 x 6.1 x 13.19 inci) |
| Beurat | 4 kg (8.82 lbs) |
| Laju Ngalir | 6000 l/h (75 Liters per minute) |
| Jangkungna Hulu Maks. | 6.5 méter |
| Voltage | 240 volt |
| Konsumsi Daya | 200 Watt |
| Bahan | palastik |
| Warna | Hideung, Pérak |
| Diaméter sambungan selang | 32mm / 38mm |
| Max. Suhu cai | 35 ℃ |
| Sertifikasi | Certified frustasi-gratis |
| Kode Artikel Internasional | 9008748409551 |
9. Garansi jeung Rojongan
Specific warranty information for the Steinbach 040955 CPS 40-2 Filtration Pump is not explicitly provided in the product data. For any product-related inquiries, technical support, or warranty claims, please contact Steinbach customer service directly or refer to the official Steinbach websitus pikeun informasi rojongan lengkep.
Mangga simpen bukti pameseran anjeun kanggo urusan anu aya patalina sareng garansi.
