Buku Panduan Pangguna Sistem Subwoofer Blaupunkt GTB 8200A RCA

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your Blaupunkt GTB 8200A RCA Subwoofer System. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage. Keep this manual for future reference.

2. Émbaran Kasalametan

• Pastikeun sadaya sambungan aman sareng insulated leres pikeun nyegah sirkuit pondok.
• Do not expose the subwoofer to moisture or extreme temperatures.
• Cabut batré kendaraan sateuacan ngalakukeun padamelan listrik naon waé.
• Taroskeun ka pamasangan profésional upami anjeun henteu yakin ngeunaan léngkah-léngkah pamasangan.
• Ulah nyobian muka atawa ngalereskeun unit sorangan. Rujuk sadayana jasa ka tanaga anu mumpuni.

3. Eusi Paket

Pastikeun yén sadaya item aya dina bungkusan:

• Blaupunkt GTB 8200A Woofer Box
• Manual pangguna (dokumén ieu)
• Cables and Installation Materials

4. Produk Langkungview

The Blaupunkt GTB 8200A is an active subwoofer system designed to enhance the bass response in your vehicle's audio system. It features a 200 mm (8-inch) spun paper cone speaker, an integrated Class-D amplifier, and various controls for sound customization.

Gambar 4.1: Hareupeun view of the Blaupunkt GTB 8200A Subwoofer System. This image displays the main subwoofer unit with its protective metal bars and the Blaupunkt logo on the speaker cone and enclosure.

Gambar 4.2: Control panel and connection terminals of the Blaupunkt GTB 8200A. This view shows the RCA inputs, high-level inputs, power indicator, gain control, crossover frequency adjustment, phase switch, fuse, and power/ground/remote terminals.

Fitur konci:

• Active subwoofer system with integrated Class-D amppangagung.
• 200 mm (8-inch) Spun Paper Cone (SPC) speaker.
• Peak power output: 200 watts.
• Frequency response: 30 - 200 Hz.
• Adjustable low-pass filter (70 - 190 Hz).
• Adjustable gain and phase control (0 - 180 degrees).
• Automatic On/Off function via high-level, RCA/Cinch, and remote signal.
• Durable MDF housing material with metal speaker protectors.

ukuran:

The subwoofer unit has approximate dimensions of 6D x 64W x 70H Centimeters (or 27.2cm width, 26cm depth, 25cm height as shown in some product images). Its compact design allows for flexible placement within a vehicle.

5. Setup jeung Instalasi

Proper installation is crucial for optimal performance and safety. If you are not confident in your ability to install the subwoofer, seek assistance from a qualified professional.

5.1 Nempatkeun

• Choose a secure location in your vehicle, such as the trunk or under a seat, where the subwoofer will not obstruct movement or be damaged.
• Pastikeun ventilasi nyukupan di sabudeureun unit.
• Mount the subwoofer securely to prevent it from shifting during vehicle operation.

5.2 Sambungan Wiring

Refer to Figure 4.2 for the control panel layout when making connections.

1. Power Connection (BAT): Connect the +12V terminal (BAT) to the positive terminal of your vehicle's battery using a suitable gauge power cable. Install an in-line fuse (7.5A, as indicated on the unit) as close to the battery as possible.
2. Sambungan taneuh (GND): Connect the GND terminal to a clean, unpainted metal surface on the vehicle chassis. Ensure a good electrical contact.
3. Jauh Hurungkeun (REM): Connect the REM terminal to the remote output of your car stereo. This will turn the subwoofer on and off with your stereo. If your stereo does not have a remote output, the automatic on/off function can be used via high-level or RCA input.
4. Audio Input (RCA or High-Level):
   • Input RCA: If your car stereo has RCA pre-outs, connect them to the 'LINE IN RCA' inputs on the subwoofer.
   • Input Tingkat Tinggi: If your car stereo does not have RCA pre-outs, connect the speaker outputs of your stereo directly to the 'HIGH' level inputs on the subwoofer. Ensure correct polarity (+/-).

6. Parentah Operasi

Once installed, adjust the subwoofer settings for optimal sound performance.

6.1 Kadali

• GAIN (Sensitivitas Input): This knob adjusts the input sensitivity of the amplifier. Start with the gain at minimum and slowly increase it until the desired bass level is achieved without distortion.
• X-OVER (Low Pass Filter): This control adjusts the upper frequency limit of the subwoofer. Frequencies above the set point will be filtered out. Adjust this between 70 Hz and 190 Hz to blend the subwoofer's output seamlessly with your main speakers. A common starting point is around 80-100 Hz.
• PHASE (Phase Control): This switch (0°/180°) helps to align the subwoofer's output with the main speakers. Experiment with both settings to find the one that provides the most impactful and coherent bass response.

6.2 Automatic On/Off Function

The GTB 8200A features an automatic turn-on circuit. When using high-level inputs or RCA inputs without a remote turn-on wire, the subwoofer will detect an audio signal and power on automatically. It will power off after a period of no audio signal.

7. Pangropéa

• beberesih: Use a soft, dry cloth to clean the exterior of the subwoofer. Do not use harsh chemicals or abrasive cleaners.
• Ngagantian sekering: If the subwoofer does not power on, check the 7.5A fuse located on the control panel. Replace it only with a fuse of the same type and rating.
• Cék biasa: Periodically check all wiring connections for tightness and signs of wear.

8. Cara ngungkulan

9. Spésifikasi

10. Garansi jeung Rojongan

This Blaupunkt GTB 8200A Subwoofer System comes with a 1-Taun Garansi ti tanggal beuli. Punten tahan bukti pameseran anjeun pikeun klaim garansi.

For technical support, service, or warranty inquiries, please contact your authorized Blaupunkt dealer or visit the official Blaupunkt websitus pikeun inpo kontak.

Blaupunkt is a registered trademark. All rights reserved.