EVGA SuperNOVA 750 G2 Power Supply User Manual

Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your EVGA SuperNOVA 750 G2 power supply. The EVGA SuperNOVA 750 G2 is a high-performance, fully modular power supply unit designed for personal computers, featuring 80 PLUS Gold certification for high efficiency and an EVGA ECO Mode for quiet operation.

Gambar 1: The EVGA SuperNOVA 750 G2 power supply unit shown alongside its retail packaging. This image highlights the product's design and branding.

Émbaran Kasalametan

Please read and understand all safety warnings before installing or operating the power supply. Failure to do so may result in personal injury or damage to the equipment.

• Entong open the power supply casing. There are no user-serviceable parts inside, and opening the unit voids the warranty and poses a risk of electric shock.
• salawasna disconnect the AC power cord from the wall outlet before installing, removing, or cleaning the power supply.
• Pastikeun catu daya dipasang di tempat anu ventilasina saé, bébas tina panas anu kaleuleuwihi, kalembaban, atanapi lebu.
• This power supply is designed for use with personal computers. Do not use it for any other purpose.
• Pastikeun grounding ditangtoskeun tina sistem komputer Anjeun.
• Jauhkeun tina jangkauan barudak.

Eusi pakét

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact EVGA support.

• EVGA SuperNOVA 750 G2 Power Supply Unit
• Modular Cable Set (various types for motherboard, CPU, VGA, SATA, Peripherals)
• Kabel Daya AC
• Pamasangan screws
• EVGA Power On Self Tester
• Manual pangguna (dokumén ieu)

Gambar 2: A komprehensif view of the modular cables and accessories included with the EVGA SuperNOVA 750 G2 power supply, such as the power on self tester and mounting screws.

Setup sareng Instalasi

Follow these steps to properly install your EVGA SuperNOVA 750 G2 power supply into your computer system.

1. Nyiapkeun Sistim anjeun: Pastikeun komputer anjeun pareum sapinuhna sareng dicabut tina stop kontak. Buka wadah komputer anjeun pikeun ngaksés tempat catu daya.
2. Cabut PSU Lama (upami aya): Cabut sadaya kabel tina catu daya anjeun anu lami teras cabut tina wadahna.
3. Pasang PSU Anyar: Carefully slide the EVGA SuperNOVA 750 G2 into the power supply bay. Secure it with the provided mounting screws.
4. Sambungkeun kabel modular:
   • Identify the necessary cables for your components (24-pin ATX for motherboard, 8-pin/4+4-pin EPS for CPU, 6+2-pin PCIe for graphics cards, SATA for drives, Molex for peripherals).
   • Plug the required modular cables into the corresponding ports on the power supply. The ports are clearly labeled (e.g., MB, CPU, VGA, SATA, PERIF).
   • Route the cables neatly through your case's cable management system.
   

   Gambar 3: A nutup-up view of the fully modular cable connection ports on the EVGA SuperNOVA 750 G2, showing labels for motherboard (MB), CPU, VGA, SATA, and peripheral connections.

5. Sambungkeun ka komponén: Connect the other end of each modular cable to its respective component (motherboard, CPU, graphics card(s), SSDs/HDDs, optical drives, etc.). Ensure all connections are firm and secure.
6. Nyambungkeun Daya AC: Once all internal connections are made, connect the AC power cord to the power supply's inlet and then to a grounded wall outlet or surge protector.
7. Power On Self Tester (Optional): To test the power supply independently before full system assembly, connect the 24-pin ATX cable to the power supply and then connect the included EVGA Power On Self Tester to the 24-pin ATX connector. The power supply fan should spin briefly, indicating basic functionality.

Operasi

After installation, you can power on your system. The EVGA SuperNOVA 750 G2 features an ECO Mode for optimized fan operation.

EVGA ECO Mode

The EVGA ECO Mode switch, located on the rear panel of the power supply, controls the fan's operation.

• ECO Mode ON: When the switch is in the 'ON' position, the power supply fan will remain off during low to moderate loads, providing silent operation. The fan will only activate when the power supply reaches a certain temperature threshold or load level to maintain optimal cooling.
• ECO Mode OFF: When the switch is in the 'OFF' position, the power supply fan will spin continuously, regardless of load or temperature, providing constant airflow.

Gambar 4: The rear panel of the EVGA SuperNOVA 750 G2 power supply, highlighting the AC power inlet, the main power switch, and the toggle switch for the EVGA ECO Mode.

Pangropéa

Pangropéa anu leres mastikeun umur panjang sareng kinerja optimal catu daya anjeun.

• Ngaleungitkeun lebu: Periodically, and with the power supply unplugged from the wall, use compressed air to gently clear dust from the fan grille and ventilation openings. Do not insert any objects into the fan or vents.
• Ventilasi: Ensure that the power supply's intake and exhaust vents are not obstructed by cables or other components within the computer case. Maintain good airflow within your system.
• beberesih: Use a soft, dry cloth to wipe the exterior of the power supply. Do not use liquid cleaners or sprays.

Pamérésan masalah

If you encounter issues with your EVGA SuperNOVA 750 G2, refer to the following common problems and solutions.

spésifikasi

Detailed technical specifications for the EVGA SuperNOVA 750 G2 power supply.

Garansi sareng Rojongan

The EVGA SuperNOVA 750 G2 power supply comes with a comprehensive garansi 10 taun, mastikeun reliabilitas jangka panjang sareng katengtreman pikiran.

For technical support, warranty claims, or further assistance, please visit the official EVGA websitus atanapi ngahubungan departemén layanan palanggan maranéhna.

EVGA Official Websitus: www.evga.com