Graco DuetConnect LX Swing and Bouncer Instruction Manual

1. Bubuka

The Graco DuetConnect LX Swing and Bouncer is designed to provide comfort and entertainment for your baby. This versatile product features a removable seat that functions as a portable bouncer, offering flexibility and convenience for parents. Please read this manual thoroughly before assembly and use to ensure safe operation and proper maintenance.

Safety Warning: Always use the restraint system. Never leave child unattended. Do not use this product if your child can sit up unaided or weighs more than 30 lbs (13.6 kg).

2. Naon Kaasup

Before assembly, ensure all parts are present. Refer to the parts list in your packaging. Key components include:

• Swing Frame (Base, Upright Tubes, Motor Housing)
• Removable Bouncer Seat (with head support and 5-point harness)
• Mobile with 3 Soft Toys
• Adaptor kakuatan
• Instruksi Manual

Gambar: Leuwihview of the Graco DuetConnect LX Swing and Bouncer, highlighting its key components like the mobile, seat with recline and head support, 5-point harness, and 2-speed vibration.

3. Setup jeung Majelis

Follow these steps carefully for proper assembly. A Phillips head screwdriver is required.

1. Assemble the Bouncer Legs: Insert the smaller tubes into the matching larger tubes to connect them, ensuring they snap securely into place.
2. Prepare the Seat Pad: Turn the seat over and wrap the seat pad over the tube on the seat, ensuring the recline handle is visible through the seat pad opening.
3. Attach Bouncer Legs to Seat: Insert the bouncer legs into the designated holes on the leg bracket, located on either side of the seat.
4. Secure Seat Pieces: Attach the seat pieces together on both sides of the seat and fasten with screws securely on each side.
5. Wrap Seat Pad: Wrap the seat pad around the vibration unit and the bottom of the seat frame. Attach the elastic straps to the hooks on both sides of the seat. Pull the seat pad webbing through the bottom of the frame.
6. Install Seat Tube: Insert the seat tube into the brackets on the rear of the seat, with the snaps facing away from the recline handle in the middle. Fasten the seat tube with two screws. Verify the seat tube is secure by pulling on it.
7. Attach Handle Release Straps: Insert the handle release straps into the seat tube brackets.
8. Complete Seat Pad Attachment: Attach the flaps on the bottom of the seat pad to the snaps on the seat tube and attach the flaps in the middle to the remaining snaps.
9. Pasang Rangka Ayun: Lay the motor housing and leg tubes on a soft, flat surface. Insert the leg tubes into the motor housing first.
10. Sambungkeun Tabung Vertikal: Insert the vertical tubes into the base tubes and snap them together on both sides.
11. Secure Base Tubes: Push down on the base tubes while inserting the tubes together so that the holes in the middle line up. Place the cover onto the tubes over the joint connection.
12. Install Hanger Tube: Insert the hanger tube into the center of the motor housing and click it into place. Verify the hanger tube is secure by pulling firmly on it.
13. Attach Bouncer to Swing Frame: Hold the bouncer by its handles, facing forward, and attach it to the mount in the center of the hanger tube. Always attach both sides of the bouncer to the hanger tube mount. Check for secure attachment by pulling up on it.

4. Parentah Operasi

4.1. Ngayakeun Satuan

The swing can be powered by plugging it into a wall outlet using the provided power adapter or by using 5 D batteries (not included) for portability. Note that the bouncer's vibration unit requires 1 D battery for operation, even when the swing is plugged in.

4.2. Using the Swing Function

The swing offers 6 adjustable speeds. Use the control dial on the motor housing to select the desired speed. The multi-direction seat allows the baby to face right, front, or left, providing more ways to soothe and entertain.

Image: Close-up of the control panel on the Graco DuetConnect LX Swing, illustrating the buttons for music, vibration, and the dial for adjusting swing speeds.

4.3. Using the Bouncer Function

To use the portable bouncer, simply lift the seat off the swing frame. The bouncer features 2-speed vibration settings to help soothe your baby. Activate the vibration using the switch located on the bouncer unit.

Image: A woman demonstrating the portability of the bouncer seat, easily lifting it from the swing frame to move it around the home.

4.4. Melodies and Sounds

The unit includes 10 classical melodies and 5 nature sounds to delight and amuse your baby. Use the dedicated buttons on the control panel to select and adjust the volume of the sounds.

4.5. Mobile and Toys

The mobile with 3 soft toys keeps baby entertained and stimulates sensory development. Ensure the mobile is securely attached and positioned appropriately for your baby's reach.

Image: A baby comfortably seated in the Graco DuetConnect LX Swing, engaging with the mobile that features three soft hanging toys.

5. Pangropéa

Regular maintenance ensures the longevity and safety of your Graco DuetConnect LX Swing and Bouncer.

• beberesih: The seat pad is machine washable. Refer to the care tag for specific washing instructions. Spot or wipe clean the frame and plastic components with a damp lawon jeung sabun hampang.
• Panyimpenan: When not in use, store the unit in a clean, dry place away from direct sunlight.
• Ngagantian batré: Replace batteries as needed. The swing requires 5 D batteries, and the bouncer's vibration unit requires 1 D battery.

6. Cara ngungkulan

Upami anjeun ngalaman masalah, tingali solusi umum ieu:

• Ayun Teu Beroperasi:
  • Ensure the power adapter is securely plugged into both the unit and a working wall outlet.
  • If using batteries, check if they are correctly installed and not depleted. Replace if necessary.
  • Verify that the swing seat is properly attached to the frame.
• Vibration Not Working (Bouncer):
  • Check the 1 D battery in the vibration unit. Ensure it is fresh and correctly installed.
• Sora anu teu biasa:
  • Ensure all assembly connections are tight and secure. Loose parts can cause creaking or clicking sounds.
  • Lubricate moving parts if necessary, following manufacturer guidelines (refer to the full manual for specific lubrication instructions if available).

7. Spésifikasi

8. Émbaran jaminan

Graco products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Graco websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.

9. Rojongan Palanggan

For further assistance, parts replacement, or any questions not covered in this manual, please contact Graco Customer Service. Contact information can typically be found on the product packaging or the official Graco websitus.

Sumberdaya online sareng FAQ ogé tiasa sayogi dina Toko Graco di Amazon.