Geberit SCACAS0010CA AP110 Cistern Instruction Manual

Bubuka

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Geberit SCACAS0010CA AP110 cistern. This product is a 9-liter capacity cistern equipped with a stop button for efficient flushing control. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.

Émbaran Kasalametan

• Always turn off the main water supply before performing any installation or maintenance on the cistern.
• Anggo alat pelindung pribadi anu pas, sapertos sarung tangan sareng panyalindungan panon, nalika dipasang.
• Pastikeun sadaya sambungan aman sareng kedap cai pikeun nyegah bocor.
• Upami anjeun teu yakin kana léngkah naon waé dina prosés pamasangan, konsultasi ka tukang ledeng anu mumpuni.
• Jauhkeun bagian leutik tina jangkauan barudak.

Eusi pakét

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Cistern box
• Stopcock
• Rinse curve
• Anjing laut
• Fixing kit (mounting hardware)

Catetan: The external tap and the connection hose are not included in the scope of delivery and must be purchased separately.

Setup sareng Instalasi

Follow these steps for proper installation of your Geberit AP110 cistern:

1. Persiapan: Turn off the main water supply to the toilet. Drain any remaining water from the existing toilet tank. Remove the old cistern if applicable.
2. Mounting the Cistern: Position the new Geberit AP110 cistern on the wall. Use the provided fixing kit to securely mount the cistern. The mounting points offer some flexibility to align with existing drill holes if replacing an old unit.
3. Install Stopcock: Attach the stopcock to the water inlet on the cistern. Ensure it is tightened securely to prevent leaks.
4. Nyambungkeun suplai cai: Connect your external tap and connection hose (not supplied) to the stopcock. Hand-tighten first, then use a wrench for a final snug fit, being careful not to overtighten.
5. Install Rinse Curve: Attach the rinse curve to the cistern outlet and connect it to the toilet bowl inlet. Ensure all seals are correctly seated to prevent leaks between the cistern and the toilet bowl.
6. Cék ahir: Slowly turn on the main water supply. Allow the cistern to fill. Check all connections for any signs of leakage.
7. Uji Siram: Perform several test flushes to ensure the cistern fills and flushes correctly without issues.

Image of the Geberit AP110 cistern, showing its overall white rectangular design and the top opening for the flush mechanism.

Pahareup-hareup view of a threaded water inlet connection point on the cistern, typically for connecting the water supply.

Parentah Operasi

The Geberit AP110 cistern features a simple stop button mechanism for flushing:

• To initiate a flush, press the stop button located on the top of the cistern.
• To stop the flush prematurely and save water, press the stop button again. This allows for controlled water usage based on need.
• The cistern has a capacity of 9 liters, providing a powerful flush when fully utilized.

Close-up of the top section of the cistern, highlighting the integrated stop button mechanism for flush control.

Pangropéa

Regular maintenance helps ensure the longevity and optimal performance of your cistern:

• beberesih: Clean the exterior of the cistern with a soft cloth and mild, non-abrasive cleaning agents. Avoid harsh chemicals or abrasive scrubbers that could damage the surface.
• Komponén internal: Periodically inspect the internal components for mineral buildup or wear. If necessary, turn off the water supply, drain the cistern, and clean or replace worn parts.
• Cék bocor: Regularly check for any signs of leaks around the cistern, connections, and the toilet bowl. Address any leaks promptly to prevent water damage.

Detail image showing the 'Geberit' brand logo subtly embossed on the side of the white cistern.

Pamérésan masalah

Ieu mangrupikeun solusi pikeun masalah umum anu anjeun tingali:

• Cistern not filling: Check if the main water supply is turned on. Ensure the stopcock is fully open. Inspect the fill valve for obstructions or damage.
• Cistern continuously running: This usually indicates a faulty fill valve or flush valve seal. Turn off the water supply, drain the cistern, and inspect or replace the affected components.
• Siram lemah: Ensure the water level in the cistern reaches the correct mark. Check for any obstructions in the rinse curve or toilet bowl.
• Bocor: Tighten all connections. Inspect seals (e.g., between cistern and toilet bowl, or around the stopcock) for wear or improper seating and replace if necessary.

spésifikasi

Émbaran jaminan

Specific warranty details for the Geberit SCACAS0010CA AP110 cistern are not provided in this document. For information regarding product warranty, please refer to the documentation included with your purchase, contact your retailer, or visit the official Geberit websitus.

Ngarojong

If you require further assistance or have questions not covered in this manual, please:

• Contact Geberit customer service through their official websitus.
• Consult a qualified and licensed plumber for professional installation or repair services.