EVGA 500W W1 80 PLUS White Power Supply (Model 100-W1-0500-KR) Instruction Manual

1. Bubuka

This manual provides essential information for the proper installation, operation, and maintenance of your EVGA 500W W1 80 PLUS White Power Supply. Please read this manual thoroughly before installation and retain it for future reference.

Figure 1: EVGA 500W W1 Power Supply and Box

2. Émbaran Kasalametan

Salawasna perhatikeun tindakan pencegahan kaamanan ieu pikeun nyegah tatu atanapi karusakan kana sistem anjeun:

• Pastikeun catu daya dipegatkeun tina stop kontak listrik AC sateuacan dipasang atanapi diropéa.
• Ulah muka unit catu daya. Tinggi voltages are present inside, and it contains no user-serviceable parts.
• Pasang catu daya di tempat anu ventilasina saé, jauh tina sumber panas sareng sinar panonpoé langsung.
• Paké ngan kabel disadiakeun kalawan catu daya.
• This product is designed for use in personal computer systems only.

3. Naon dina Box

Pastikeun yén sadaya komponén aya:

• EVGA 500W1 Power Supply
• Kabel ATX
• Kabel EPS
• Kabel PCIE
• Kabel SATA
• Four-Pin Peripheral Cable
• Floppy Adaptor
• Kabel Daya AC
• Guide instalasi
• Power Supply Tester

Figure 2: Included Power Cables

4. Produk Langkungview jeung Fitur

The EVGA 500W W1 Power Supply is designed for reliable performance in basic system builds. Key features include:

• Kaluaran 500 Watt: Nyadiakeun ample power for most entry-level to mid-range computer systems.
• 80 PLUS White Certified: Achieves 80% efficiency or higher under typical loads, reducing energy consumption and heat.
• Tunggal + 12V Rel: Delivers 40A on a single +12V rail for stable power delivery to demanding components.
• Heavy-Duty Protections: Ngawengku Leuwih Voltage Protection (OVP), Dina Voltage Protection (UVP), Over Current Protection (OCP), Over Power Protection (OPP), and Short Circuit Protection (SCP).
• Ultra Quiet Fan Design: Features a fan designed for quiet operation.
• Fully Sleeved Cables: Enhances cable management and aesthetics within your PC case.

5. Setup jeung Instalasi

Follow these steps to install your EVGA 500W W1 Power Supply:

1. Nyiapkeun Sistim anjeun: Pastikeun komputer anjeun dipareuman sareng dicabut tina stop kontak. Buka wadah komputer anjeun pikeun ngaksés tempat catu daya.
2. Cabut Catu Daya Lawas (upami aya): Disconnect all cables from your old power supply to the motherboard and other components. Unscrew and remove the old power supply from the case.
3. Pasang Catu Daya Anyar: Carefully place the EVGA 500W W1 Power Supply into the designated bay in your computer case. Secure it with the provided screws.
4. Sambungkeun Kabel Daya Utama: Connect the 24-pin ATX cable to your motherboard. Connect the 4+4-pin EPS (CPU) cable to the CPU power connector on your motherboard.
5. Sambungkeun Kabel Periferal: Connect the appropriate PCIe cables to your graphics card(s). Connect SATA power cables to your storage drives (HDDs/SSDs) and optical drives. Use 4-pin peripheral cables for other accessories as needed.
6. Manajemén Kabel: Route cables neatly to improve airflow and aesthetics. Use cable ties if necessary.
7. Nyambungkeun Daya AC: Once all internal connections are secure, connect the AC power cable to the power supply and then to a wall outlet.

Figure 3: Power Supply with Attached Cables

Figure 4: Rear Panel with Power Switch and AC Input

6. Parentah Operasi

After successful installation, operate your power supply as follows:

• Ensure the power switch on the rear of the power supply is in the 'ON' (I) position.
• Pencét tombol daya dina wadah komputer anjeun pikeun ngamimitian sistem.
• The power supply will automatically adjust its fan speed based on temperature and load to maintain optimal cooling and quiet operation.

7. Pangropéa

Regular maintenance helps ensure the longevity and performance of your power supply:

• beberesih: Periodically clean the exterior of the power supply and the fan grille to prevent dust buildup. Use compressed air to gently clear dust from the fan and vents. Ensure the power supply is unplugged before cleaning.
• Tiupan hawa: Ensure adequate airflow around the power supply within your computer case. Avoid blocking intake or exhaust vents.
• Pamariksaan kabel: Occasionally check all power connections to ensure they are securely seated.

8. Cara ngungkulan

If you encounter issues with your power supply, consider the following:

• Henteu aya kakuatan: Check if the AC power cable is securely connected to both the power supply and the wall outlet. Verify the power switch on the PSU is in the 'ON' position. Test the wall outlet with another device.
• Instabilitas Sistem / Kacilakaan: Ensure all power cables (24-pin ATX, EPS, PCIe, SATA) are correctly and firmly connected. Verify that your system's power requirements do not exceed the 500W capacity of the PSU.
• Bising kipas: Check for dust buildup in the fan or vents. Ensure the power supply is not operating under excessive load, which can cause the fan to spin faster.
• Bau ngaduruk: Immediately power off and unplug your computer. Do not attempt to restart it. Contact EVGA support.

9. Spésifikasi

Detailed specifications for the EVGA 500W W1 Power Supply:

Figure 5: Power Supply Specification Label

10. Garansi jeung Rojongan

The EVGA 500W W1 Power Supply comes with a standard garansi 3 taun. For warranty claims, technical support, or additional product information, please visit the official EVGA websitus atanapi ngahubungan departemén layanan palanggan maranéhna.

EVGA Official Websitus: www.evga.com