Termometer Suhu Ganda ROD Lipat Fieldpiece SPK3 kalayan Buku Panduan Pangguna Pistol Infrabeureum 8:1

1. Bubuka

The Fieldpiece SPK3 is a versatile dual-temperature thermometer designed for HVACR professionals. It combines a folding rod temperature probe for in-duct measurements with an 8:1 infrared (IR) gun for non-contact surface temperature readings. This device features a convenient flip display, Max/Min, Hold, and T1-T2 functions, and a robust design for field use.

Image 1.1: The Fieldpiece SPK3 thermometer, showing its folding rod probe extended and the infrared sensor. The display shows temperature readings.

2. Setélan

2.1 Pamasangan batré

1. Teangan tempat panutup kompartemen batré dina tonggong unit.
2. Use a small screwdriver or coin to open the battery compartment.
3. Insert two (2) AAA batteries, ensuring correct polarity (+/-). The batteries are included with the device.
4. Ganti panutup kompartemen batré sareng amankeun.

2.2 Daya Awal Hurung

Pencét éta ON/OFF button to power on the device. The display will illuminate, and the thermometer will be ready for use.

3. Parentah Operasi

3.1 Operasi Umum

• Hurungkeun/Pareuman: Pencét éta ON/OFF tombol pikeun ngahurungkeun atawa mareuman unit.
• Pilihan Unit: Pencét éta ° C / ° F tombol pikeun pindah antara unit suhu Celsius sareng Fahrenheit.
• Lampu tukang: The display is backlit for visibility in low-light conditions.

3.2 Folding Rod (ROD) Mode

The folding rod probe is designed for accurate in-duct temperature measurements.

1. Deploying the Probe: Gently unfold the rod probe from the main body of the thermometer. Detents will lock the probe into various open positions, allowing for partial or full extension.
2. In-Duct Measurement: Insert the piercing tip of the rod into the ductwork. The rod hook allows the SPK3 to hang hands-free from registers or ductwork, providing stable readings.
3. Orientasi tampilan: The backlit display automatically flips its orientation when the unit is hung or positioned in ROD mode, ensuring readings are always upright.

3.3 Infrared (IR) Mode

The 8:1 infrared gun provides quick, non-contact surface temperature measurements.

1. Activating IR: Point the infrared sensor (located at the top of the unit) towards the target surface.
2. pangukuran: Pencét jeung tahan tombol IR button to take a reading. The temperature will be displayed on the screen. Release the button to hold the reading.
3. Rasio Jarak-ka-Spot: The 8:1 ratio means that at a distance of 8 inches, the measurement spot size is 1 inch. Ensure you are close enough to the target for accurate readings.

3.4 Fungsi Maju

• MAX / Mnt: Pencét éta MAX/MIN tombol pikeun view the maximum or minimum temperature recorded during a measurement session.
• Tahan: Pencét éta TAHAN tombol pikeun ngabekukeun bacaan suhu ayeuna dina tampilan. Pencét deui pikeun ngaleupaskeun.
• T1-T2: The SPK3 can quickly calculate the temperature difference between two readings (T1-T2) using either IR or ROD mode. Refer to the on-screen prompts for specific instructions on using this function.

4. Pangropéa

4.1 beberesih

To clean the SPK3, wipe the exterior with a damp cloth. Do not use abrasive cleaners or immerse the unit in water. Ensure the infrared lens and probe tip are kept clean for accurate measurements.

4.2 Ngagantian batré

When the battery indicator appears on the display, replace the AAA batteries as described in Section 2.1.

4.3 Panyimpenan

When not in use, fold the rod probe back into the body of the thermometer for protection. Store the unit in a dry environment, away from extreme temperatures and direct sunlight.

5. Cara ngungkulan

• Teu Aya Tampilan/Unit Teu Dihurungkeun:
  • Pariksa pamasangan batré sareng pastikeun polaritasna leres.
  • Ganti batré ku anu anyar.
• Inaccurate Readings (ROD Probe):
  • Pastikeun ujung probe bersih sareng bébas tina kokotor.
  • Allow sufficient time for the probe to stabilize to the measured temperature.
  • Verify the probe is fully inserted into the measurement area.
• Inaccurate Readings (IR Gun):
  • Ensure the IR lens is clean.
  • Maintain the correct distance-to-spot ratio (8:1).
  • Avoid measuring highly reflective surfaces, as IR thermometers may provide inaccurate readings on such materials.
• Display Not Flipping:
  • Ensure the unit is in ROD mode and positioned appropriately for the automatic flip feature to engage.

6. Spésifikasi

7. Jaminan & Dukungan

7.1 Émbaran jaminan

The Fieldpiece SPK3 comes with a 1-taun jaminan produsén urang ti tanggal beuli. Garansi ieu nyertakeun cacad dina bahan sareng pagawean dina panggunaan normal. Punten tahan bukti pameseran anjeun pikeun klaim garansi.

7.2 Rojongan Palanggan

For technical assistance, troubleshooting, or warranty inquiries, please contact Fieldpiece customer support. Visit the official Fieldpiece websitus kanggo inpormasi kontak sareng sumber daya tambahan.

Sumberdaya Online: www.fieldpiece.com