PAC OS-2X Radio Replacement Interface with OnStar Retention User Manual for Select GM Class II Vehicles

1. Bubuka

The PAC OS-2X Radio Replacement Interface is designed to allow the installation of an aftermarket radio into select General Motors (GM) Class II vehicles while retaining essential factory features. This interface ensures the continued functionality of OnStar, warning chimes, and other vehicle-specific features that would otherwise be lost when replacing the factory radio.

This manual provides detailed instructions for the proper installation, operation, and maintenance of your PAC OS-2X interface. Please read all instructions thoroughly before beginning installation.

PAC OS-2X Radio Replacement Interface module and wiring harness

Figure 1: PAC OS-2X Radio Replacement Interface module and associated wiring harness. This image shows the main components included in the package, highlighting the interface module and the various connectors for vehicle and aftermarket radio integration.

2. Émbaran Kasalametan

Salawasna pegatkeun terminal batré négatif kandaraan sateuacan ngamimitian pamasangan listrik pikeun nyegah korsleting sareng karusakan.
Pastikeun sadaya sambungan aman sareng diisolasi kalayan leres pikeun nyegah korsleting listrik.
Tingal manual servis kendaraan anjeun pikeun diagram pengkabelan khusus sareng parentah ngabongkar.
Upami anjeun teu yakin kana bagian mana waé tina prosés pamasangan, konsultasi ka teknisi audio mobil anu mumpuni.
Do not modify the interface module or wiring harness. Unauthorized modifications can void the warranty and cause damage.
Keep the interface module away from moisture and extreme temperatures.

3. Eusi Paket

Verify that all items are present before proceeding with the installation:

PAC OS-2X Interface Module
Vehicle Specific Wiring Harness
Aftermarket Radio Connection Harness
Manual pangguna (dokumén ieu)

4. Setup and Pre-Installation

Baca Manual: Thoroughly read this instruction manual and your aftermarket radio's manual before starting.
Alat ngumpulkeun: Collect necessary tools such as wire strippers, crimpers, electrical tape, multimeter, and panel removal tools.
Pegatkeun sambungan batré: Pegatkeun sambungan terminal négatip batré kandaraan urang.
Cabut Radio Pabrik: Carefully remove the factory radio from the dashboard. Refer to your vehicle's service manual for specific instructions.
Identipikasi Kabel Kendaraan: Familiarize yourself with the vehicle's factory wiring harness.

5. Parentah instalasi

Follow these steps carefully to install the PAC OS-2X interface:

Connect Aftermarket Radio Harness: Connect the wires from the aftermarket radio's harness to the corresponding wires on the PAC Aftermarket Radio Connection Harness. Match wire colors and functions (e.g., constant 12V, accessory 12V, ground, speaker wires). Solder and heat shrink, or use high-quality crimp connectors for secure connections.
Connect Vehicle Specific Harness: Plug the PAC Vehicle Specific Wiring Harness into the factory radio harness connectors in the vehicle's dashboard.
Connect Interface Module: Plug the Aftermarket Radio Connection Harness and the Vehicle Specific Wiring Harness into the PAC OS-2X Interface Module. Ensure all connectors are fully seated.
Connect Antenna Adapter (if required): If your aftermarket radio requires an antenna adapter, connect it now.
Connect Steering Wheel Control (SWC) (if applicable): If your aftermarket radio supports steering wheel controls and you wish to retain them, connect the SWC output wire from the PAC module to the SWC input of your aftermarket radio. Refer to your radio's manual for specific SWC wiring.
Fungsi Uji: Before reassembling the dashboard, temporarily reconnect the vehicle's negative battery terminal. Turn on the ignition and test the aftermarket radio's basic functions (power, sound, fader/balance). Verify that OnStar functionality and all warning chimes are working correctly.
Komponén Aman: Once all functions are verified, disconnect the battery again. Secure the PAC OS-2X module and all wiring harnesses behind the dashboard, ensuring they do not interfere with any moving parts or pinch points.
Pasang deui Dashboard: Reinstall the aftermarket radio and reassemble the dashboard components.
Final Battery Connection: Sambungkeun deui terminal batré négatip.

6. Operasi

The PAC OS-2X interface operates automatically once installed. Its primary function is to translate vehicle data signals for the aftermarket radio and maintain factory features.

6.1 OnStar Retention

The interface retains full OnStar functionality. When an OnStar call is initiated or received, the audio will be routed through the vehicle's speakers, and the aftermarket radio will mute or switch to the OnStar audio source, depending on the radio's capabilities.

6.2 Warning Chimes

All factory warning chimes (e.g., door ajar, seatbelt, key in ignition) are retained and will sound through the vehicle's speakers as they did with the factory radio.

6.3 Steering Wheel Controls (Optional)

If connected and configured, the interface allows the factory steering wheel audio controls to operate the aftermarket radio. Refer to your aftermarket radio's manual for programming instructions if necessary.

7. Pangropéa

The PAC OS-2X interface is designed for maintenance-free operation. No user-serviceable parts are inside the module.

Ensure all wiring connections remain secure. Loose connections can lead to intermittent functionality.
Keep the area around the interface module free from excessive dust or moisture.
Do not attempt to open or repair the module.

8. Cara ngungkulan

If you experience issues with your PAC OS-2X interface, refer to the following table:

Masalah	Mungkin Cukang lantaranana	Solusi
Aftermarket radio has no power.	Sambungan kakuatan leupas. Blown fuse in vehicle or radio. Incorrect wiring of constant or accessory power.	Pariksa sadaya sambungan listrik sareng taneuh. Inspect vehicle and radio fuses. Verify wiring against diagrams.
No sound from aftermarket radio.	Sambungan spiker leupas. Aftermarket radio not properly configured. Kandaraan amplampu teu hurung (upami aya).	Pariksa sadaya sambungan kabel speaker. Ensure radio's fader/balance is centered. Verifikasi amplifier turn-on wire connection.
OnStar not working or no audio.	Interface module not receiving power. Incorrect connection to OnStar audio input (if applicable).	Verify power to the PAC module. Ensure OnStar audio connections are correct.
Warning chimes are missing or incorrect.	Interface module not receiving proper data. Speaker for chimes not connected.	Check all connections to the PAC module and vehicle harness. Ensure the chime speaker (if separate) is connected.
Steering Wheel Controls not functioning.	SWC wire not connected or connected incorrectly. Aftermarket radio requires programming for SWC.	Verify SWC wire connection between PAC module and radio. Refer to your aftermarket radio's manual for SWC programming.

9. Spésifikasi

Fitur	Rincian
Nomer modél	OS-2X (Item model number: OS2X-SL)
merek	PAC
Kasaluyuan	Select GM Class II Vehicles
Fitur Dipikagaduh	OnStar, Warning Chimes, Retained Accessory Power (RAP), Steering Wheel Controls (with compatible radio)
Bahan	Tambaga, Polivinil Klorida (PVC)
Ukuran barang (L x W x H)	9 x 9 x 2 inci
Item Beurat	0.96 Pon (kira-kira 15.4 ons)
Tipe Panyambung	OEM/Deutsch DT
UPC	609098814478, 606523105729

10. Garansi jeung Rojongan

10.1 Émbaran jaminan

The PAC OS-2X interface comes with a 1 Taun Produsén Garansi from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, neglect, or unauthorized modification.

For warranty claims, please retain your proof of purchase and contact PAC customer support.

10.2 Rojongan Téknis

If you require technical assistance or have questions regarding the installation or operation of your PAC OS-2X interface, please contact PAC technical support. Before contacting support, please ensure you have read this manual thoroughly and performed basic troubleshooting steps.

Contact information for PAC can typically be found on their official websitus atanapi dina bungkusan produk.

	Pituduh Pamasangan Antarmuka Panggantian Radio GM PAC C2R-GM11b Comprehensive installation guide for the PAC C2R-GM11b, a radio replacement interface for GM GMLAN 11-bit vehicles without OnStar. This interface retains factory warning chimes, turn signal indicators, and the Retained Accessory Power (RAP) feature, while enabling aftermarket stereo installation.
	GM1A-RT Radio ngagantian Interface kalawan Telematics ingetan - PAC Pituduh lengkep pikeun PAC GM1A-RT Radio Panggantian Interface, ngawengku instalasi, fitur, wiring, setélan adjustable, sarta apdet firmware pikeun kandaraan General Motors pilih jeung Kelas II Data-Beus.
	Pamasangan sareng Fitur Antarmuka Panggantian Radio PAC GM1A-RST Pituduh lengkep pikeun antarmuka panggantian radio PAC GM1A-RST, anu ngajelaskeun pamasangan, fitur, pamrograman kontrol setir, sareng pangaluyuan aplikasi PC pikeun kendaraan General Motors pilihan kalayan Kelas II Data-Bus.
	RP5-GM32 Radio ngagantian & Setir Control Interface Guide Instalasi Pituduh pamasangan anu lengkep pikeun Panggantian Radio sareng Antarmuka Kontrol Setir PAC RP5-GM32, dirancang pikeun kendaraan General Motors kalayan panyimpenan OnStar. Ngawengku kabel, pamrograman, sareng pitunjuk uji coba.
	PAC OS2-GM32X Radio Replacement Interface with OnStar Retention for Select GM Vehicles Detailed guide for the PAC OS2-GM32X interface, enabling radio replacement in select General Motors vehicles while retaining factory features like OnStar, warning chimes, and BOSE® amplifier. Includes wiring, installation, and testing instructions.
	GM3A-RSTX Ngagantian Radio sarta setir Control Interface Manual pamaké Manual ieu nyadiakeun parentah pikeun masang sarta ngagunakeun panganteur GM3A-RSTX, ngagantian radio jeung panganteur kontrol setir kalawan ingetan OnStar pikeun kandaraan Umum Motors. Éta nyertakeun wiring, program, sareng fitur sapertos nahan fungsi pabrik sareng fungsionalitas paréntah ganda.

PAC OS-2X