Fender '68 Custom Twin Reverb Amplifier Instruksi Manual

1. Bubuka jeung Leuwihview

The Fender '68 Custom Twin Reverb Amplifier pays tribute to the classic look, sound, and performance of Fender's late '60s "silver face" amplifiers. Originally a transitional year for Fender amps, 1968 brought a fresh aesthetic with a silver and turquoise front panel and aluminum "drip edge" grille cloth trim, while maintaining the pure Fender tone. This amplifier is renowned for its clear, deep, and powerful sound, delivering big tube tone with world-class Fender reverb and vibrato effects.

The '68 Custom Twin Reverb features both channels with reverb and tremolo. The "custom" channel incorporates a modified Bassman tone stack, offering modern players enhanced tonal flexibility, especially when using pedals. It also provides quicker gain onset and reduced negative feedback for greater touch sensitivity. Equipped with dual 12-inch Celestion G12V-70 speakers, this amplifier delivers a distinctively rock 'n' roll flavor.

2. Fitur konci

• Dual Channel Reverb and Tremolo: Both channels are equipped with reverb and tremolo effects, offering a vintage feel with modern versatility.
• Modified Bassman Tone Stack: The "custom" channel features a Bassman tone stack, providing enhanced tonal flexibility for use with various pedals.
• Celestion G12V-70 Speakers: Dual 12-inch Celestion G12V-70 speakers deliver a distinctively rock 'n' roll sound.
• Ningkatkeun Responsifitas: Quicker gain onset and reduced negative feedback contribute to greater touch sensitivity.
• Asesoris kaasup: Comes with a fitted amplifier cover and a 2-button footswitch for convenient control of effects.

3. Setélan

3.1 Ngabongkar sareng Nempatkeun

Ati-ati ngaleupaskeun amplifier from its packaging. Place the amplifier on a stable, level surface. Ensure adequate ventilation around the unit to prevent overheating. Avoid placing the amptempatkeun di deukeut sumber panas atawa dina sinar panonpoé langsung.

3.2 Sambungan Daya

1. Pastikeun amplifier's power switch is in the "OFF" position.
2. Connect the supplied power cord to the AC inlet on the rear panel of the amppangagung.
3. Colokkeun tungtung kabel listrik anu sanés ka stop kontak listrik AC anu dibumikeun.

3.3 Sambungan Instrumén

Connect your guitar or other instrument to one of the input jacks on the front panel using a high-quality instrument cable. The amplifier features two input jacks per channel (Custom and Vintage), typically labeled "1" (high gain) and "2" (low gain). Experiment to find the input that best suits your instrument's output level and desired tone.

3.4 Sambungan Saklar Suku

Connect the included 2-button footswitch to the "FOOTSWITCH" jack on the rear panel to enable remote control of the reverb and tremolo effects.

4. Parentah Operasi

4.1 Powering on / Pareum

1. Pikeun Ngahurungkeun:
   • Ensure all volume controls are set to zero.
   • Flip the "POWER" switch to the "ON" position.
   • Wait approximately 30-60 seconds for the tubes to warm up.
   • Flip the "STANDBY" switch to the "ON" position.
   • Slowly raise the volume to your desired level.
2. Pikeun mareuman:
   • Lower all volume controls to zero.
   • Flip the "STANDBY" switch to the "OFF" position.
   • Wait a few seconds, then flip the "POWER" switch to the "OFF" position.

4.2 Kadali Panel hareup

The '68 Custom Twin Reverb features two distinct channels: a 'Custom' channel with a modified Bassman tone stack and a 'Vintage' channel for classic Fender tones. Both channels include Reverb and Tremolo.

• Inputs (1 & 2): Input 1 offers higher gain, while Input 2 provides lower gain.
• Volume: Controls the overall output level of the selected channel.
• Treble: Nyaluyukeun réspon frékuénsi luhur.
• Middle (Custom Channel Only): Adjusts the mid-range frequency response.
• Bass: Nyaluyukeun réspon frékuénsi handap.
• Reverb: Controls the intensity of the digital hall reverb effect.
• Speed (Tremolo): Saluyukeun laju éfék tremolo.
• Intensity (Tremolo): Saluyukeun jerona éfék tremolo.

4.3 Tone Shaping Tips

• For a classic clean Fender tone, start with Volume around 3-5, Treble and Bass at 5-7, and Reverb at 2-4.
• To achieve a natural tube overdrive, increase the Volume control. The amp will begin to break up as it gets louder.
• The 'Custom' channel's Bassman tone stack allows for more aggressive mid-range shaping, ideal for driving pedals.
• Experiment with the Speed and Intensity controls of the Tremolo to find your preferred modulation.

4.4 Product Demonstration Videos

5. Pangropéa

5.1 Kamanusaan sarta Studi Umum

• Tetep dina ampbersih ku cara ngusap eta ku lawon lemes garing.
• Ulah nganggo pembersih atanapi pelarut anu abrasif, sabab ieu tiasa ngaruksak lapisan akhir.
• Nangtayungan nu amplifier from dust, moisture, and extreme temperatures.
• When transporting, use the included fitted amplifier cover to protect against scratches and impacts.

5.2 Panggantian Tabung

Vacuum tubes have a finite lifespan and will eventually need replacement. If you notice a decrease in performance, unusual noise, or a change in tone, it may be time to replace the tubes. It is recommended to have tube replacement and biasing performed by a qualified technician to ensure proper operation and safety.

5.3 Ngagantian sekering

Lamun éta amplifier fails to power on, check the main fuse located on the rear panel. Always replace a blown fuse with one of the exact same type and rating to prevent damage to the amplifier and ensure safety. Consult the specifications section for the correct fuse type.

6. Cara ngungkulan

• Henteu aya sora:
  • Check all cable connections (power, instrument, speaker).
  • Pastikeun amplifier is powered on and the standby switch is engaged.
  • Verify instrument volume and tone controls are not set to zero.
  • Check if the fuse has blown (refer to Maintenance section).
• Sora/Dengung Kaleuleuwihi:
  • Pastikeun sadaya kabel dilindungan kalayan leres sareng dina kaayaan anu saé.
  • Coba colokkeun amplifier into a different power outlet or a power conditioner.
  • Pindahkeun amplifier away from other electronic devices that may cause interference.
  • Faulty tubes can cause noise; consider professional inspection.
• Sora Lemah atanapi Distorsi:
  • Pariksa kabel instrumen pikeun karusakan.
  • Verify speaker connection.
  • Tubes may be worn out or faulty; professional inspection is recommended.

7. Spésifikasi

Hareupeun view of the Fender '68 Custom Twin Reverb Amplirén, nuduhkeuncasing its silver and turquoise front panel, aluminum "drip edge" grille cloth trim, and control knobs.

Samping view of the Fender '68 Custom Twin Reverb Amplifier, illustrating its physical dimensions: 10.38 inches depth, 19.88 inches height, and 26.16 inches width.

8. Garansi jeung Rojongan

For warranty information, product registration, and technical support, please visit the official Fender website or contact Fender customer service. Keep your proof of purchase for any warranty claims.

Fender Official Websitus: www.fender.com