Motorola HKKN4027A RM Series CPS Programming Cable Instruction Manual

Bubuka

The Motorola HKKN4027A CPS Programming Cable is designed to connect your Motorola RM, RDX, and CLP Series Business Radios to a personal computer. This connection facilitates the customization of radio settings and frequencies using compatible Customer Programming Software (CPS).

Naon dina Box

• RM Series CPS Programming Cable

Disetél

1. Connecting the Cable to Your Radio

1. Ensure your Motorola RM, RDX, or CLP Series radio is powered off.
2. Locate the accessory jack(s) on the side of your radio.
3. Carefully insert the radio-side connector of the HKKN4027A cable into the radio's accessory jack(s). Ensure it is fully seated.
4. Power on radio Anjeun.

2. Connecting the Cable to Your Computer

1. Plug the USB Type A connector of the HKKN4027A cable into an available USB port on your computer.

3. Pamasangan supir sareng parangkat lunak

The programming cable requires specific drivers to function correctly with your computer. These drivers are typically provided with the Motorola Customer Programming Software (CPS). If a driver CD is included, install the drivers from it. Alternatively, download the latest CPS and drivers from the official Motorola Solutions websitus.

Catetan penting: Some programming cables feature a switch labeled 'CPS' and 'Flash'. Ensure this switch is set to the 'CPS' position for standard programming operations.

Image: The Motorola HKKN4027A programming cable features a switch to select between 'CPS' (Customer Programming Software) and 'Flash' modes. For general radio programming, ensure the switch is set to 'CPS'.

4. Configuring the COM Port

After installing the drivers, you may need to configure the correct COM port in your CPS. This is a common step to ensure communication between the software and the radio.

1. Sambungkeun kabel USB ka komputer Anjeun.
2. Open your computer's Device Manager (search for 'Device Manager' in Windows).
3. Expand the 'Ports (COM & LPT)' section.
4. Identify the USB-Serial device and note its assigned COM Port (e.g., COM3).
5. Launch your Motorola CPS.
6. Navigate to the radio connection settings (often under a 'Radio' or 'Communication' tab).
7. Select the COM Port that matches the one identified in Device Manager.

Ngoperasikeun

Programming Radio Anjeun

1. With the cable connected and COM port configured, open your Motorola CPS.
2. Follow the software's instructions to read the current configuration from your radio. This is recommended before making any changes.
3. Modify frequencies, channels, and other settings as needed within the CPS interface.
4. Once modifications are complete, use the software's 'Write to Radio' or 'Program' function to transfer the new settings to your radio.
5. After successful programming, disconnect the cable and restart your radio to apply the new settings.

Pangropéa

To ensure the longevity and reliable performance of your Motorola HKKN4027A programming cable, follow these maintenance guidelines:

• Panyimpenan: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or kinking the cable, which can damage internal wires.
• beberesih: Anggo lawon anu lemes sareng garing pikeun ngabersihkeun kabel sareng konektorna. Hindarkeun nganggo bahan kimia anu keras atanapi bahan anu abrasif.
• Penanganan: Salawasna cekel tungtung konektor nalika nyolokkeun atanapi nyabut kabel, tinimbang narik kabelna sorangan.
• Tahan cai: The cable features a water-resistant design, making it suitable for both indoor and outdoor use. However, it is not fully waterproof. Avoid submerging the cable in water or exposing it to heavy rain for extended periods.

Pamérésan masalah

Cable Not Recognized by Computer

• Pamasangan supir: Ensure the correct drivers for the programming cable are installed. Reinstalling drivers can often resolve recognition issues.
• COM Port Mismatch: Verify that the COM port selected in your CPS matches the one assigned to the USB-Serial device in your computer's Device Manager (refer to 'Configuring the COM Port' in the Setup section).
• Port USB: Coba sambungkeun kabel ka port USB béda dina komputer Anjeun.
• Kaayaan kabel: Pariksa kabelna bisi aya karusakan anu katingali. Kabel anu ruksak tiasa waé henteu tiasa dianggo kalayan leres.

Kasalahan Programming

• Daya Radio: Ensure the radio is powered on and fully charged during programming.
• Sambungan kabel: Confirm that the cable is securely connected to both the radio and the computer.
• Vérsi software: Use the correct version of Motorola CPS compatible with your specific radio model.
• Ngalihkeun Posisi: If your cable has a CPS/Flash switch, ensure it is in the 'CPS' position.
• Modeu Radio: Some radios require being in a specific mode (e.g., programming mode) before they can be programmed. Consult your radio's manual.

spésifikasi

Garansi sareng Rojongan

As a genuine Motorola accessory, this product is subject to Motorola Solutions' standard warranty terms. For specific warranty details, please refer to the documentation included with your purchase or visit the official Motorola Solutions websitus.

penting: Motorola recommends purchasing only from an authorized dealer to ensure product authenticity and eligibility for support and warranty services.

For technical support or further assistance, please contact Motorola Solutions customer service or consult their online resources.