Juniper Networks J2320-JB-SC

Juniper J2320 Layanan Router Manual pamaké

Model: J2320-JB-SC

1. Bubuka

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Juniper J2320 Services Router. The J2320 is a high-performance, modular router designed for secure, reliable network connectivity. It features Junos OS, 1GB DRAM, 1GB Flash, and three PIM (Physical Interface Module) slots, suitable for 19-inch rack mounting.

2. Émbaran Kasalametan

Always observe the following safety precautions when handling or operating the Juniper J2320 Services Router:

  • Ensure the device is properly grounded before connecting power.
  • Do not block ventilation openings. Adequate airflow is crucial for cooling.
  • Use only the power supply provided or specified by Juniper Networks.
  • Hindarkeun ngalaan alat ka lembab atanapi suhu anu ekstrim.
  • Ngan tanaga anu mumpuni kedah ngalaksanakeun pamasangan sareng perawatan.

3. Eusi Paket

Pastikeun yén sadaya item aya dina bungkusan:

  • Juniper J2320 Services Router
  • Base Memory (256 MB)
  • SW Encryption
  • AC Power Supply
  • Rack-mounting hardware (screws, brackets)
  • Dokuméntasi (manual ieu)

4. Produk Langkungview

The Juniper J2320 Services Router is a compact, rack-mountable device. Familiarize yourself with its components:

Hareupeun view of Juniper J2320 Services Router with included accessories

Gambar 4.1: Hareupeun view of the Juniper J2320 Services Router, showcasing the main unit with its front panel ports and indicators, along with the included power cable and a small bag of mounting screws.

Puncak view of Juniper J2320 Services Router with power cable and network cable

Gambar 4.2: Ti luhur ka handap view of the Juniper J2320 Services Router, showing the router unit, a coiled power cable, and a light blue network cable in a plastic bag, all laid out on a white surface.

Close-up of Juniper J2320 front panel with power, status, reset, console, and auxiliary ports

Gambar 4.3: A detailed close-up of the Juniper J2320 router's front panel. Visible elements include the Juniper Networks logo, model number J2320, LED indicators for Power, Status, Alarm, and HA (High Availability), a Reset/Config button, and Console and Aux RJ-45 ports.

Samping view of Juniper J2320 router showing ventilation grilles

Gambar 4.4: Sisi profile of the Juniper J2320 Services Router, highlighting the extensive ventilation grilles along the side and rear, essential for heat dissipation during operation.

Tukangeun view of Juniper J2320 router with power input and serial labels

Gambar 4.5: Tukangeun view of the Juniper J2320 Services Router, displaying the AC power input socket, grounding screw, and various product labels including serial numbers and model information.

Komponen Panel Hareup:

  • LED kakuatan: Nunjukkeun status kakuatan.
  • Status LED: Indicates system operational status.
  • LED alarem: Indicates system alarms or errors.
  • Reset/Config Button: Used for system reset or configuration mode.
  • Port konsol: RJ-45 port for local management access.
  • Port Aux: Auxiliary port for dial-up or other connections.
  • Network (RJ-45) Ports: Four 10/100/1000Base-T Gigabit Ethernet ports.
  • PIM Slots: Three expansion slots for Physical Interface Modules.
  • Port USB: Two USB 2.0 ports (USB 0, USB 1).

5. Setélan

5.1 Rak Pamasangan

The J2320 router is designed for 19-inch rack mounting (1U height).

  1. Attach the provided rack-mounting brackets to the sides of the router using the supplied screws.
  2. Align the router with the rack posts and secure it using appropriate rack screws.
  3. Ensure there is adequate space for airflow around the unit.

5.2 Sambungan Daya

  1. Connect the AC power cord to the power input on the rear of the router.
  2. Colokkeun tungtung kabel listrik anu sanés kana stop kontak listrik anu dibumikeun.
  3. The Power LED on the front panel should illuminate.

5.3 Konfigurasi Awal

For initial configuration, connect a console cable from your management workstation to the Console port on the router's front panel. Refer to the Junos OS documentation for detailed configuration steps.

6. Ngoperasikeun Router

6.1 Powering on / Pareum

  • Daya Hurung: Connect the AC power cord. The router will automatically power on and begin its boot sequence.
  • Pareum listrik: Disconnect the AC power cord from the electrical outlet. For graceful shutdown, use the appropriate Junos OS command line interface (CLI) commands before disconnecting power.

6.2 Indikator LED

Monitor the front panel LEDs for operational status:

  • Daya LED (Héjo): Héjo kolot nunjukkeun daya keur hurung.
  • Status LED (Green/Amber): Solid green indicates normal operation. Amber may indicate a warning or degraded state.
  • Alarm LED (Red/Amber): Red indicates a critical alarm. Amber indicates a minor alarm.

6.3 Konektipitas jaringan

Connect network devices to the RJ-45 network ports. The ports support 10/100/1000Base-T Ethernet. Ensure proper cabling (straight-through or crossover as required by your network setup).

7. Pangropéa

7.1 beberesih

  • Bersihkeun bagian luar router sacara berkala nganggo lawon anu lemes sareng garing.
  • Ensure ventilation openings are free from dust and debris. Use compressed air if necessary, but do not spray directly into ports.
  • Entong nganggo pembersih cair atanapi aerosol.

7.2 Apdet firmware

Rutin pariksa dukungan Juniper Networks website for the latest Junos OS firmware updates. Keeping the firmware updated ensures optimal performance, security, and access to new features. Follow the instructions provided by Juniper Networks for firmware update procedures.

8. Cara ngungkulan

MasalahMungkin Cukang lantarananaSolusi
Router does not power on.No power to the unit; faulty power cord or outlet.Check power cord connection. Verify power outlet is functional.
Alarm LED is red.Critical system error or hardware failure.Check system logs via console. Contact Juniper support if unresolved.
Cannot access router via network.Incorrect IP configuration; network cable issue.Verify IP settings. Check network cable connections and status LEDs on ports.

9. Spésifikasi

FiturRincian
Modél produkJ2320
Produsén Bagian JumlahJ2320-JB-SC
Jenis produkRouter
Total Jumlah palabuhan4 (RJ-45 Network) + Console/Aux + USB
Téhnologi Jaringan10/100/1000Base-T Gigabit Ethernet
Memori standar1 GB DRAM
Mémori Flash1GB Flash
slot ékspansi7 total, 3 PIM slots
Compatible Rack Unit1U
Faktor BentukRak-dipasang
Ukuran (H x W x D)1.8" x 17.5" x 15.1"
Beurat (Perkiraan)15.00 lb
Tanggal Kahiji Sadia21 Juli 2013

Note: Memory and Flash values are based on the product title for this specific model variant.

10. Garansi jeung Rojongan

10.1 Garansi Produsén

The Juniper J2320 Services Router typically comes with a 1-Taun jaminan kawates from Juniper Networks. Please refer to the official Juniper Networks warranty documentation for full terms and conditions.

10.2 Rencana panyalindungan nambahan

Extended protection plans may be available for purchase separately to provide additional coverage beyond the standard manufacturer's warranty. These plans can offer extended service and support for your device.

  • Rencana Perlindungan 4 Taun: Provides extended coverage for four years.
  • Ngajaga lengkep: Rencana langganan bulanan nyertakeun pameseran katukang sareng ka hareup anu layak.

Pikeun detil ngeunaan purchasing or activating these plans, consult your retailer or the plan provider.

10.3 Rojongan Téknis

For technical assistance, software updates, or further documentation, please visit the official Juniper Networks support websitus atanapi ngahubungan layanan palanggan maranéhna. Pastikeun anjeun ngagaduhan modél produk sareng nomer séri anjeun nalika milarian dukungan.

Produsén Websitus alamat: http://www.juniper.net

Dokumén Patali - J2320-JB-SC

Praview Juniper SSG mun J-Series Router Guide Konversi: Métode USB
Ieu pituduh ti Juniper Networks rinci prosés konvérsi SSG 300M-seri jeung SSG 500M-seri alat kaamanan pikeun J-seri routers jasa maké alat panyimpen USB. Éta nyertakeun prosedur konversi samentawis sareng permanén, pemetaan alat, sareng prasyarat.
Praview Pituduh Mimitian Gancang Juniper MX304
Pituduh singget pikeun masang sareng ngonpigurasikeun router Juniper MX304, anu ngawengku setelan awal, prosedur hurung, sareng léngkah konfigurasi dasar pikeun kasiapan jaringan.
Praview Pituduh Perangkat Keras Router Metro Universal Juniper Networks ACX2200
Pituduh perangkat keras ieu nyayogikeun inpormasi lengkep ngeunaan Juniper Networks ACX2200 Universal Metro Router, anu ngawengku pamasangan, konfigurasi, pangropéa, ngungkulan masalah, sareng prosedur kaamanan. Diajar ngeunaan fitur, spésifikasi, sareng palaksanaanna pikeun jaringan aksés.
Praview Kawijakan Kaamanan sareng Panduan Operasional Juniper Networks MX104 FIPS 140-2
This FIPS 140-2 Cryptographic Module Security Policy for the Juniper Networks MX104 3D Universal Edge Router with Multiservices MIC details its hardware, modes of operation, cryptographic functions, roles, authentication methods, self-tests, physical security, and operational rules. It serves as a guide for secure deployment and management.
Praview Junos® OS MPLS Applications User Guide
This guide provides comprehensive information on MPLS technology, its applications, functions, and configuration within Juniper Networks' Junos OS. Learn to deploy and manage MPLS features for efficient network traffic management.
Praview Sertifikasi Juniper JNCIS-SEC: Panduan Ujian Spesialis Kaamanan
Explore the Juniper JNCIS-SEC certification, a specialist-level credential focused on security technology and Junos OS for Juniper Networks SRX Series Firewalls. This guide details exam objectives, preparation resources, and exam structure.