MEAN WELL LPV-60-12 AC-DC Power Supply

1. Bubuka

The MEAN WELL LPV-60-12 is a 60W single output switching power supply designed for various applications, including LED lighting. This unit converts alternating current (AC) to direct current (DC), providing a stable 12V DC output at 5 Amps. It features a wide input voltage range of 90-264 VAC and is fully encapsulated with an IP67 rating, making it suitable for both indoor and outdoor use. The LPV-60-12 is UL listed and classified as a Class 2 power transformer, ensuring safety and reliability.

2. Émbaran Kasalametan

Mangga baca tur ngartos sagala parentah kaamanan saméméh instalasi tur operasi. Gagalna nuturkeun paréntah ieu tiasa nyababkeun shock listrik, seuneu, atanapi bahaya anu sanés.

• Personil anu mumpuni: Pamasangan sareng perawatan kedah dilakukeun ku jalmi anu mumpuni hungkul.
• Pegatkeun daya: Always disconnect power at the circuit breaker before installing or servicing the unit.
• Wiring anu leres: Ensure all wiring connections are secure and comply with local electrical codes. Refer to the wiring diagram for correct connections.
• Ventilasi: Pastikeun ventilasi anu cekap di sakitar catu daya pikeun nyegah panas teuing. Ulah nutupan unitna.
• Kaayaan Lingkungan: Do not operate the unit beyond its specified temperature and humidity limits. The IP67 rating provides protection against dust and water immersion, but proper installation is crucial.
• Kapasitas beban: Do not exceed the maximum output current (5A) or power (60W) of the power supply. Overloading can cause damage and reduce lifespan.

3. Spésifikasi

4. Setup jeung Instalasi

Refer to the technical diagram below for mechanical specifications, recommended mounting direction, and wiring details.

Figure 1: Technical Diagram of LPV-60-12 Power Supply

4.1 Spésifikasi mékanis

The power supply measures 162.5 mm in length, 42.5 mm in width, and 32 mm in height. It includes mounting holes with a diameter of 3.6 mm for secure panel mounting. The input wires (AC/N Blue, AC/L Brown) are UL1015 18AWG, and the output wires (+V Red, -V Black) are UL1007 16AWG, both approximately 600mm long.

4.2 Recommended Mounting Direction

The unit should be mounted horizontally on a flat surface to ensure optimal heat dissipation and performance. Refer to the 'Recommend Mounting Direction' section in Figure 1 for visual guidance.

4.3 Parentah Wiring

Ensure power is disconnected before making any connections.

• Sambungan Input: Connect the AC input wires to your standard electrical outlet. The blue wire (AC/N) is for neutral, and the brown wire (AC/L) is for live.
• Sambungan Kaluaran: Connect the DC output wires to your 12V DC device. The red wire (+V) is for positive, and the black wire (-V) is for negative.
• Sambungan Aman: Ensure all wire connections are tight and properly insulated to prevent short circuits.

5. Parentah Operasi

Once properly installed and wired, the LPV-60-12 power supply operates automatically. Apply AC power to the input, and the unit will provide a stable 12V DC output. No user adjustments are required for standard operation. Ensure the connected load does not exceed 60W to maintain optimal performance and longevity.

6. Pangropéa

The LPV-60-12 power supply is designed for maintenance-free operation due to its fully encapsulated and sealed design. Regular maintenance is generally not required. However, consider the following:

• Inspeksi périodik: Periodically inspect the unit and its wiring for any signs of damage, wear, or loose connections.
• beberesih: If installed in a dusty environment, gently wipe the exterior of the unit with a dry cloth to remove any accumulated dust. Do not use liquids or abrasive cleaners.
• Pariksa Lingkungan: Ensure the operating environment remains within the specified temperature range and that ventilation is not obstructed.

7. Cara ngungkulan

Upami catu daya henteu jalan sapertos anu dipiharep, laksanakeun pamariksaan dasar ieu:

• Teu aya Daya Kaluaran:
  • Verify that the AC input power is connected and active.
  • Check all input and output wiring connections for looseness or damage.
  • Ensure the load connected to the power supply does not exceed its 60W capacity. Disconnect the load and test the power supply independently if unsure.
• Operasi intermittent:
  • Check for unstable AC input voltage.
  • Ensure the ambient temperature is within the operating range and that the unit is not overheating. Refer to the derating curve in Figure 1.
• Kaluaran Voltage Issues:
  • Confirm the connected device requires 12V DC.
  • Lamun kaluaran voltage is significantly lower than 12V, the unit may be overloaded or faulty.

If troubleshooting steps do not resolve the issue, contact qualified service personnel or MEAN WELL customer support.

8. Karakteristik kinerja

The technical diagram (Figure 1) provides important performance characteristics:

8.1 Diagram Blok

The 'Block Diagram' section in Figure 1 illustrates the internal architecture of the power supply, including the EMI filter, rectifiers, power switching, PWM control, detection circuit, and output voltage protection (O.V.P.) and overload protection (O.L.P.) mechanisms. The switching frequency (fosc) is 65KHz.

8.2 Derating Curve

The 'Derating Curve' in Figure 1 shows the relationship between the maximum permissible load percentage and the ambient temperature. It indicates how the power supply's maximum output capacity decreases as the ambient temperature rises, especially above 40°C for 230VAC input and above 30°C for 115VAC input. Operating within the shaded region ensures optimal performance and lifespan.

8.3 Static Characteristics

The 'Static Characteristics' graph in Figure 1 displays the load percentage relative to the input voltage at 60Hz. It demonstrates that the power supply maintains 100% load capacity across a wide input voltage range, typically from approximately 100V to 264V, ensuring stable operation under varying input conditions.

9. Garansi jeung Rojongan

The MEAN WELL LPV-60-12 power supply comes with a manufacturer's 2-year warranty. This warranty covers defects in materials and workmanship under normal use and service conditions.

For warranty claims, technical support, or further assistance, please contact your product vendor or an authorized MEAN WELL distributor. Keep your purchase receipt as proof of purchase for warranty validation.