Manual Pangguna Stasion Pangisi Daya Kendaraan Listrik Hager WITTY (Modél XEV103)

1. Bubuka

1.1. Langkungview

The Hager WITTY charging station is designed for charging electric vehicles in accordance with Mode 3 (IEC 61851-1) and Mode 2 standards. It supports both Type 3 and standard socket connections, offering flexible charging solutions for various electric vehicles. This device operates on a 3-phase + Neutral, 32A electrical supply, delivering power from 4 kW to 22 kW.

1.2. Parentah Kasalametan

• Pamasangan kedah dilakukeun ku tukang listrik anu mumpuni saluyu sareng kode listrik lokal sareng nasional.
• Do not attempt to open or repair the charging station yourself. Contact qualified service personnel.
• Pastikeun stasiun ngecas bener grounded.
• Do not use the charging station if it is damaged or shows signs of malfunction.
• Keep children and unauthorized persons away from the charging station during operation.
• Avoid exposing the charging station to extreme temperatures, direct sunlight for prolonged periods, or corrosive substances.

2. Pedaran produk

2.1. Fitur

• Compatible with Mode 3 (Type 3) and Mode 2 charging.
• Free access operation.
• Power output: 4 kW to 22 kW.
• Input: 3-phase + Neutral, 32A.
• Integrated status indicator light.

2.2. komponén

The Hager WITTY charging station typically includes:

• Charging station unit
• Pemasangan hardware (screws, jangkar)
• Manual pamaké (dokumén ieu)

Gambar 1: Hareupeun view of the Hager WITTY charging station with a green operational light, mounted on a textured wall.

Gambar 2: Samping view of the Hager WITTY charging station, illustrating the cable connection point and the unit's profile.

Gambar 3: Detil hareup view of the Hager WITTY charging station, emphasizing the integrated green status light.

3. Setélan

3.1. Lokasi pamasangan

Choose a suitable location that is protected from direct impact, excessive moisture, and extreme temperatures. Ensure adequate ventilation and accessibility for maintenance.

3.2. Pamasangan

1. Tandaan titik-titik pangeboran dina témbok nganggo citakan anu disayogikeun (upami aya) atanapi ku cara ngukur liang pemasangan dina unit éta.
2. Bor liang teras pasang jangkar témbok anu cocog.
3. Secure the charging station to the wall using the provided screws.

3.3. Sambungan Listrik

PERHATOSAN: Pamasangan listrik kedah dilakukeun ku tukang listrik anu mumpuni.

1. Ensure the main power supply is disconnected before beginning any electrical work.
2. Connect the 3-phase + Neutral (3Ph+N) 32A power supply to the designated terminals inside the charging station.
3. Pastikeun grounding-na geus dipasang kalawan bener.
4. Verify all connections are secure and correctly wired according to the wiring diagram provided with the unit (refer to the separate installation guide for detailed diagrams).
5. Close the charging station cover securely.

4. Nyuping

4.1. Ngamimitian Biaya

1. Ensure the charging station is powered on and the status indicator light is green (ready).
2. Connect the charging cable to your electric vehicle's charging port.
3. Connect the other end of the charging cable to the charging station's outlet (Type 3 or Mode 2 socket).
4. The charging station will automatically initiate the charging process. The status indicator light may change to blue or flashing green, depending on the charging status.

4.2. Ngeureunkeun Ngecas

1. Cabut heula kabel ngecas tina kendaraan listrik anjeun.
2. Disconnect the charging cable from the charging station.
3. The charging station will return to a ready state (green indicator light).

4.3. Indikator Status

• Lampu héjo: Siap ngecas.
• Blue Light (or flashing green): Ngecas lumangsung.
• Red Light (or flashing red): Error or fault detected. Refer to the Troubleshooting section.
• Teu aya Cahaya: Power off or system fault.

5. Pangropéa

5.1. beberesih

Ngabersihan bagian luar stasiun ngecas ku lemes, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals. Ensure the unit is powered off before cleaning.

5.2. Pamariksaan

Periodically inspect the charging station for any signs of damage, wear, or loose connections. Check the charging cable for fraying or damage. If any damage is found, discontinue use and contact a qualified technician.

6. Cara ngungkulan

7. Spésifikasi

8. Garansi jeung Rojongan

For warranty information and technical support, please refer to the official Hager website or contact your local Hager distributor. Keep your purchase receipt for warranty claims.

Spare parts availability: Information not available.