1. Bubuka
The TC Electronic DITTO LOOPER is a highly intuitive looper pedal designed specifically for guitarists. It offers essential looping functionalities with a simple one-button user interface, true bypass, analog-dry-through design, and an ultra-small footprint. This pedal provides 5 minutes of looping time, unlimited overdubs, and undo/redo functionality, ensuring high-quality 24-bit uncompressed audio.
2. Fitur konci
- 5 minutes of loop time, unlimited overdubs and undo/redo functionality.
- Designed by guitarists, for guitarists, ensuring intuitive operation.
- True bypass and analog-dry-through preserve your original tone.
- Ultra-small footprint for easy integration into any pedalboard.
- 24-bit uncompressed high-quality audio for pristine sound.
3. Naon dina Box
Your TC Electronic DITTO LOOPER package includes:
- TC Electronic DITTO LOOPER Pedal
Note: A 9V power supply providing 100 mA or more is required and not supplied with the pedal.
4. Setélan
Follow these steps to set up your DITTO LOOPER pedal:
- Sambungan Daya: Connect a 9V DC power supply (not included) to the power input jack on the pedal. Ensure the power supply provides 100 mA or more.
- Sambungan Instrumen: Connect your guitar to the input jack on the side of the pedal using a standard 1/4-inch instrument cable.
- AmpSambungan Lifier: Sambungkeun jack output tina pedal ka Anjeun ampinput lifier nganggo kabel instrumen standar 1/4 inci anu sanés.
- Loop Level Adjustment: Turn the "LOOP LEVEL" knob to your desired volume. This knob controls the playback volume of your recorded loops.
Image: TC Electronic Ditto Looper pedal, top-down view, showing the loop level knob and true bypass footswitch.
5. Parentah Operasi
The DITTO LOOPER features a simple one-button interface for all looping functions. The LED indicator changes color to show the current mode:
- LED Beureum: Modeu rékaman.
- LED Héjo: Modeu playback.
- LED héjo kedip-kedip: Undo/Redo or Delete confirmation.
Video: Hiji leuwihview of the TC Electronic Ditto Looper's features and basic operation, including recording, playback, and clearing loops.
5.1. Recording Your First Loop
To record your first loop:
- Press the footswitch once to start recording. The LED will turn red.
- Play your desired phrase.
- Press the footswitch once again to stop recording and immediately start playback. The LED will turn green. Your loop will now play continuously.
5.2. Overdubbing
To add layers (overdubs) to your existing loop:
- While the loop is playing (green LED), press the footswitch once. The LED will turn red, indicating overdub recording has started.
- Play your new layer.
- Press the footswitch once again to stop overdubbing and return to playback mode. The LED will turn green.
- Repeat this process for unlimited overdubs.
5.3. Undo/Redo Last Overdub
To undo or redo your last recorded overdub:
- While the loop is playing (green LED), press and hold the footswitch for approximately 2 seconds. The LED will blink green once to confirm the undo action.
- To redo the undone overdub, press and hold the footswitch again for approximately 2 seconds. The LED will blink green once to confirm the redo action.
5.4. Ngeureunkeun Playback
To stop the loop playback:
- While the loop is playing (green LED), quickly double-tap the footswitch. The loop will stop, and the LED will turn off.
5.5. Clearing the Loop
To completely erase the current loop:
- While the loop is stopped (LED off), press and hold the footswitch for approximately 2 seconds. The LED will blink green rapidly to confirm the loop has been cleared.
6. Spésifikasi
| Fitur | Rincian |
|---|---|
| Item Beurat | 0.17 pon (2.72 ons) |
| Dimensi produk | 3.9"P x 2.5"L x 4"T (4 x 3.9 x 2.5 inci) |
| Nomer modél | 960801001 |
| Bahan Awak | palastik |
| Tipe Panyambung | 1/4-inch Audio (Barrel Connector for power) |
| Format Sinyal | Analog |
| Sumber Daya | Corded Electric (9V, 100mA or more) |
| Bypass leres | Sumuhun |
| Analog-Dry-Through | Sumuhun |
| Waktos Loop | 5 menit |
| Overdubs | Unlimited |
| Kualitas Audio | 24-bit uncompressed |
7. Pangropéa
To ensure the longevity and optimal performance of your DITTO LOOPER:
- Keep the pedal clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Ulah nepi ka pedal kakeunaan suhu anu ekstrim, kalembaban, atanapi sinar panonpoé langsung.
- Ulah make cleaners abrasive atawa pangleyur.
- Store the pedal in a dry, cool place when not in use.
8. Cara ngungkulan
8.1. No Power / LED Not Lighting Up
- Ensure the 9V DC power supply is correctly connected and provides at least 100 mA.
- Pastikeun stop kontak listrik fungsina.
- Pariksa kabel kakuatan pikeun karuksakan nanaon.
8.2. No Sound / Weak Sound
- Check all instrument cables for proper connection and ensure they are not faulty.
- Verify the "LOOP LEVEL" knob is turned up.
- Pastikeun Anjeun amplifier is powered on and set to an audible volume.
- If using other pedals, temporarily bypass them to isolate the issue.
8.3. Loop Not Recording / Playing Back Correctly
- Ensure you are following the correct operating steps for recording and playback (single tap to record/play, double tap to stop).
- If experiencing pops or clicks, ensure your power supply is stable and providing clean power.
9. Jaminan & Dukungan
For warranty information and technical support, please refer to the official TC Electronic websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen bukti pameseran anjeun pikeun klaim garansi.
Pejabat Éléktronik TC Websitus: www.tcelectronic.com
