1. Bubuka
Thank you for choosing the Marinco 82082 Wiper Motor. This manual provides essential information for the proper installation, operation, and maintenance of your new marine wiper motor. Please read these instructions thoroughly before installation and use to ensure optimal performance and safety.
The Marinco 2.5 Series wiper motor is engineered for marine environments, featuring a fully sealed, powder-coated aluminum waterproof base and housing. It is designed to power a 26-inch deluxe arm and blade combination or a 24-inch premier arm and blade combination.
2. Émbaran Kasalametan
- Kasalametan listrik: Ensure all power is disconnected before attempting any installation or maintenance. Incorrect wiring can lead to electrical shock, fire, or damage to the motor and vessel's electrical system.
- Pamasangan profésional: If you are not familiar with marine electrical systems, it is highly recommended to have the wiper motor installed by a qualified marine technician.
- Pamasangan Aman: The motor must be securely mounted to prevent vibration and ensure proper operation. Loose mounting can lead to damage or failure.
- Correct Components: Use only wiper arms and blades compatible with the 2.5 Series motor as specified by Marinco.
3. Spésifikasi
| Nomer modél | 82082 |
| merek | Marinco |
| Runtuyan | 2.5 runtuyan |
| Voltage | 12V DC |
| Panjang aci | 2.5 inci |
| Sweep Angle | 80 darajat |
| Bahan Perumahan | Fully sealed powder-coated aluminum waterproof base and housing |
| Compatible Arm/Blade | 26" Deluxe Arm/Blade or 24" Premier Arm/Blade |
| Item Beurat | 3.25 Pon (kira-kira 1.47 kg) |
| Beurat pakét | 2.67 Kilogram (kira-kira 5.89 lbs) |
| Produsén | Marinco Electrical Group |
4. Setup jeung Instalasi
Proper installation is crucial for the longevity and performance of your Marinco wiper motor. Refer to the detailed wiring diagram provided with your product packaging for specific connections.
4.1 Mounting the Wiper Motor
- Pilih Lokasi: Choose a mounting location that allows for the desired sweep angle and provides sufficient clearance for the motor and wiper arm assembly. Ensure the surface is flat and sturdy.
- liang bor: Mark and drill appropriate mounting holes and a hole for the wiper shaft, following the template if provided with the product.
- Motor Aman: Mount the wiper motor securely using marine-grade fasteners. Apply marine sealant around the shaft and mounting holes to prevent water intrusion.
4.2 Sambungan Listrik
- Sumber Daya: Connect the motor to a 12V DC power source. Ensure the circuit is protected by an appropriately sized fuse or circuit breaker.
- Diagram Wiring: Follow the specific wiring diagram included with your motor for positive, negative, and switch connections. Incorrect wiring can damage the motor.
- Waterproof Connections: Use marine-grade, waterproof connectors and heat shrink tubing for all electrical connections to prevent corrosion and short circuits.
4.3 Attaching Wiper Arm and Blade
- Install Arm: Attach the compatible wiper arm (26" deluxe or 24" premier) to the motor shaft according to the arm's instructions. Ensure it is securely fastened.
- Pasang Blade: Attach the corresponding wiper blade to the arm.
- Test Sweep: Before final tightening, manually move the arm to ensure it does not hit any obstructions within its sweep path. Adjust the arm position on the shaft if necessary.
Gambar 1: Luhur jeung handap view of the Marinco 82082 Wiper Motor. The top view shows the sealed, powder-coated aluminum housing. The bottom view reveals the wiring connections for power and control, along with the shaft for the wiper arm.
5. Parentah Operasi
Once installed, the Marinco 82082 Wiper Motor operates via a compatible marine wiper switch (not included). The switch typically controls the motor's on/off function and speed settings (if applicable).
- Daya Hurung: Activate the wiper switch to the desired setting (e.g., low, high, intermittent).
- Pareum listrik: Turn the wiper switch to the 'off' position. The motor is designed to return the wiper arm to its park position automatically.
- Intermittent Settings: If your switch supports intermittent operation, refer to the switch's manual for specific timing adjustments.
6. Pangropéa
Regular maintenance ensures the longevity and reliable operation of your wiper motor.
- Wiper Blades: Inspect wiper blades regularly for wear, cracking, or hardening. Replace blades at least annually, or more frequently in harsh marine environments, to ensure effective clearing of the windshield.
- beberesih: Keep the wiper arm, blade, and the visible part of the motor housing clean. Use fresh water and a mild soap solution. Avoid abrasive cleaners or solvents.
- Sambungan: Periodically check all electrical connections for corrosion or looseness. Clean and re-secure as necessary.
- Pamasangan: Verify that the motor remains securely mounted and that there is no water ingress around the mounting points.
7. Cara ngungkulan
If you encounter issues with your Marinco 82082 Wiper Motor, consult the following troubleshooting guide:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Motor teu jalan | No power to motor, blown fuse/tripped breaker, faulty switch, loose wiring connection. | Check power supply, inspect fuse/breaker, test switch, verify all wiring connections are secure. |
| Wiper arm moves slowly or stalls | Vol handaptage, excessive friction (e.g., dry windshield, worn blade), obstruction, internal motor issue. | Pariksa batré voltage, ensure windshield is wet, replace wiper blade, inspect for obstructions, contact support if motor issue is suspected. |
| Wiper arm does not park correctly | Faulty park mechanism, incorrect wiring. | Verify wiring according to diagram. If issue persists, motor may require service. |
| Noise kaleuleuwihan salila operasi | Loose mounting, worn components, dry operation. | Check motor mounting. Ensure windshield is wet. Inspect wiper arm and blade for wear. |
If troubleshooting steps do not resolve the issue, please contact Marinco customer support or a qualified marine technician.
8. Garansi jeung Rojongan
The Marinco 82082 Wiper Motor is covered by a manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the warranty documentation included with your product or visit the official Marinco websitus.
For technical assistance, replacement parts, or further inquiries, please contact Marinco customer support through their official websitus atanapi inpormasi kontak anu disayogikeun dina bungkusan produk anjeun.
