Bubuka
This manual provides essential instructions for the proper installation, use, and maintenance of the Edlund F059 #270 Grey Replacement Foot. Please read this manual thoroughly before installation to ensure correct application and optimal performance. Retain this manual for future reference.
Produk Leuwihview
The Edlund F059 #270 Grey Foot is a durable component designed to provide stable support and prevent scratching or sliding for various equipment and surfaces. It is manufactured to precise specifications for reliable performance.
Gambar 1: A close-up view of the Edlund F059 #270 Grey Foot, a circular, dark grey component with a central hole, designed for stability and support.
Setup sareng Instalasi
Follow these steps for proper installation of the replacement foot:
- Nyiapkeun permukaan: Ensure the mounting surface on the equipment is clean, dry, and free from debris or old adhesive residue.
- Identipikasi Titik Pasang: Locate the designated mounting hole or area for the foot. The Edlund F059 foot typically uses a central screw or bolt for attachment.
- Position the Foot: Place the Edlund F059 foot over the mounting hole, aligning the central hole of the foot with the equipment's mounting point.
- Secure the Foot: Insert the appropriate screw or bolt (not included, typically supplied with the equipment) through the central hole of the foot and into the equipment. Tighten securely, but do not overtighten, to avoid damaging the foot or the equipment.
- Pariksa Stabilitas: After installation, gently test the equipment to ensure the foot is firmly attached and provides stable support.
Parentah Operasi
Once installed, the Edlund F059 replacement foot operates passively by providing a stable, non-slip base for your equipment. No active operation is required. Ensure the equipment is placed on a flat, level surface to maximize the foot's effectiveness in preventing movement and protecting surfaces.
Pangropéa
Regular maintenance ensures the longevity and effectiveness of your Edlund F059 foot.
- beberesih: Wipe the foot periodically with a damp cloth to remove dust and grime. Avoid harsh chemicals or abrasive cleaners, as these can degrade the material.
- Pamariksaan: Regularly inspect the foot for signs of wear, cracking, or damage. Check that it remains securely attached to the equipment.
- ngagantian: If the foot shows significant wear, becomes loose, or is damaged, replace it promptly to maintain equipment stability and prevent surface damage.
Pamérésan masalah
Bagian ieu ngabahas masalah umum anu anjeun tingali.
| Masalah | Solusi |
|---|---|
| Equipment is unstable or wobbles. |
|
| Foot detaches or becomes loose. |
|
| Foot leaves marks on surfaces. |
|
spésifikasi
- merek: Edlund
- model: F059
- Nomer Bagian: #270 GREY (BUDWIG #SF6T)
- Bahan: (Assumed) Rubber/Polymer composite
- warna: kulawu
- Beurat barang: Approximately 1 pound (per unit)
- Jenis pas: Universal (for compatible mounting points)
Émbaran jaminan
Edlund products are manufactured to high standards. For specific warranty details regarding the F059 #270 Grey Replacement Foot, please refer to the warranty documentation provided with your original equipment or contact Edlund customer support directly. General wear and tear are typically not covered under warranty.
Rojongan Palanggan
If you have any questions, require assistance, or need to report an issue with your Edlund F059 #270 Grey Replacement Foot, please contact Edlund customer service. Contact information can typically be found on the official Edlund website or on your original product packaging.
Kanggo inpormasi salajengna, anjeun tiasa nganjang ka Edlund Company websitus.
