1. Produk Langkungview
The Planet IGS-801M is an 8-Port 10/100/1000Base-TX Industrial SNMP Switch designed for robust network connectivity in harsh environments. Featuring an IP30 aluminum case, it supports a wide operating temperature range from -40 to 75 degrees Celsius, making it suitable for industrial applications requiring high reliability and performance.
Gambar 1: Hareupeun view of the IGS-801M Industrial SNMP Switch. This image displays the compact, rugged design with eight Gigabit Ethernet ports and status LEDs for power, fault, link, and activity.
2. Fitur konci
- 8-Port Gigabit Ethernet: Provides 8 x 10/100/1000Base-TX RJ45 ports for high-speed network connections.
- Desain Kelas Industri: IP30 rated aluminum case for protection against dust and harsh conditions.
- Suhu Operasi Lebar: Operates reliably in extreme temperatures from -40°C to 75°C (-40°F to 167°F).
- Manajemén SNMP: Supports Simple Network Management Protocol for remote monitoring and management.
- DIN-Rail and Wall-Mountable: Flexible installation options for various industrial environments.
- Input Daya Kaleuleuwihan: Features dual DC power inputs for enhanced reliability.
- Kinerja luhur: Non-blocking wire-speed forwarding for optimal data throughput.
3. Setup Guide
3.1 Eusi pakét
Sateuacan neraskeun pamasangan, mangga pariksa heula naha pakét anjeun ngandung barang-barang ieu:
- IGS-801M Industrial SNMP Switch
- Guide Instalasi Gancang
- Kit pemasangan DIN-Rail
- Terminal block connector for power input
3.2 Instalasi fisik
The IGS-801M can be installed on a standard DIN-rail or mounted on a wall. Ensure the installation location is well-ventilated and within the specified operating temperature range.
- DIN-Rail Pamasangan: Attach the DIN-rail clip to the rear of the switch. Hook the top of the clip onto the DIN-rail and push the bottom until it snaps into place.
- Pamasangan témbok: Use the provided wall-mount brackets (if applicable) and screws to secure the switch to a flat surface. Ensure adequate clearance for cabling and ventilation.
Gambar 2: Angled view of the IGS-801M, showing the Ethernet ports and the removable terminal block for power input at the top.
3.3 Sambungan Daya
The IGS-801M supports redundant DC power inputs. Connect your power source(s) to the terminal block connector located on the top of the switch. Ensure correct polarity (V+ to positive, V- to negative, and Ground to ground). The input voltage range is typically 12-48V DC, but refer to the product label for exact specifications.
- Connect the power wires to the appropriate terminals on the removable terminal block.
- Insert the terminal block into the power input slot on the switch.
- Once power is supplied, the P1 and/or P2 LEDs on the front panel should illuminate.
3.4 Sambungan Jaringan
Connect your network devices (e.g., computers, servers, other switches) to the RJ45 Ethernet ports on the front panel using standard Cat5e/6 Ethernet cables. The switch supports auto MDI/MDI-X, so straight-through or crossover cables can be used interchangeably.
- Insert one end of the Ethernet cable into an available port on the IGS-801M.
- Connect the other end of the cable to your network device.
- The corresponding LNK/ACT LED for that port will illuminate when a valid link is established and blink to indicate activity.
4. Operasi
4.1 Indikator LED
The front panel of the IGS-801M features several LED indicators to provide status information:
- P1 / P2 (Green): Indicates power status for power input 1 and 2. Lit when power is supplied.
- KASALAHAN (Beureum): Indicates a system fault or power failure. Lit when an issue is detected.
- LNK/ACT (Green for each port):
- Héjo padet: A valid network link is established.
- Héjo kedip-kedip: Aktivitas data lumangsung dina palabuhan.
- 1000 (Green for each port): Indicates Gigabit (1000Mbps) connection speed.
- 100 (Green for each port): Indicates Fast Ethernet (100Mbps) connection speed.
4.2 Konfigurasi Jaringan Dasar
The IGS-801M is a managed switch, supporting SNMP for advanced network management. For initial setup and basic configuration, you may need to connect to the switch via its web-based interface or console port (if available). Refer to the full user manual or the Quick Installation Guide for detailed instructions on accessing and configuring the switch's management features, including IP address assignment, VLANs, QoS, and security settings.
By default, the switch may obtain an IP address via DHCP or have a static default IP address. Consult the product documentation for the default IP and login credentials.
5. Pangropéa
Regular maintenance helps ensure the longevity and optimal performance of your IGS-801M switch.
- beberesih: Bersihkeun bagian luar saklar sacara berkala nganggo lawon anu lemes sareng garing. Entong nganggo pembersih cair atanapi aerosol. Pastikeun liang ventilasi bébas tina lebu sareng kokotor.
- Pembaruan firmware: Pariksa Téhnologi Planét website regularly for firmware updates. Keeping the firmware up-to-date can improve performance, add new features, and address security vulnerabilities.
- Pengawasan Lingkungan: Pastikeun lingkungan operasi tetep aya dina kisaran suhu sareng kalembaban anu ditangtukeun pikeun nyegah karusakan.
- Manajemén Kabel: Ensure all network and power cables are securely connected and properly routed to prevent accidental disconnections or damage.
6. Cara ngungkulan
This section provides solutions to common issues you might encounter with the IGS-801M switch.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| No Power (P1/P2 LEDs off) | No power supply, incorrect wiring, faulty power adapter. | Verify power source connection and voltage. Check terminal block wiring for correct polarity. Test with a known good power adapter. |
| No Link (LNK/ACT LED off) | Incorrect cable, faulty cable, device not powered on, port disabled. | Ensure Ethernet cable is properly connected at both ends. Try a different cable. Verify the connected device is powered on and functioning. Check switch configuration if ports are managed. |
| Lambat Network Speed | Cable quality, network congestion, duplex mismatch. | Ensure Cat5e/6 cables are used for Gigabit speeds. Check for excessive network traffic. Verify duplex settings on connected devices match the switch. |
| FAULT LED is lit | Power input issue, internal hardware fault. | Check both power inputs (P1 and P2). If the issue persists, contact technical support. |
7. Spésifikasi Téknis
| Fitur | Spésifikasi |
|---|---|
| Modél | IGS-801M |
| Palabuhan | 8 x 10/100/1000Base-TX RJ45 |
| Laju Mindahkeun Data | 1000 Megabits per detik |
| Suhu Operasi | -40°C nepi ka 75°C (-40°F nepi ka 167°F) |
| Kapungkur | IP30 Industrial Aluminum Case |
| Input kakuatan | Redundant DC (Voltage range typically 12-48V DC) |
| Ukuran (L x W x H) | 1.1 x 9.7 x 6.5 inci (kira-kira) |
| Item Beurat | 1.04 pon (472 gram) |
| Produsén | PLANÉT |
8. Garansi jeung Rojongan
For detailed warranty information, please refer to the warranty card included with your product or visit the official Planet Technology websitus. Sarat jeung kaayaan jaminan bisa rupa-rupa dumasar wewengkon jeung produk.
For technical support, product inquiries, or service requests, please contact Planet Technology's customer support. You can typically find contact information on their official website or in the product's full documentation.
Note: This manual provides general guidance. For comprehensive details and advanced configurations, please refer to the complete user manual available on the manufacturer's websitus.
