AeroCool Silent Master 200mm Blue LED Cooling Fan EN55642 User Manual

Bubuka

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your AeroCool Silent Master 200mm Blue LED Cooling Fan. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Émbaran Kasalametan

• Ensure power is disconnected from your computer before installation or maintenance.
• Avoid touching the fan blades while the fan is operating.
• Do not expose the fan to moisture or extreme temperatures.
• Jauhkeun tina jangkauan barudak.

Eusi pakét

Pastikeun yén sadaya item aya dina bungkusan:

• 1x AeroCool Silent Master 200mm Blue LED Cooling Fan
• 1x 3-pin to 4-pin Molex converter
• 4x Pamasangan screws

Setup sareng Instalasi

1. Nyiapkeun wadah komputer anjeun: Ensure your computer is powered off and unplugged. Open the computer case to access the fan mounting locations.
2. Nangtukeun lokasi pamasangan: The AeroCool Silent Master 200mm fan is designed for standard 200mm fan mounts in PC cases. Confirm available space and desired airflow direction (intake or exhaust).
3. Pasang kipas: Position the fan in the desired location. Use the included 4 mounting screws to secure the fan to the case. Do not overtighten.
4. Nyambungkeun kakuatan: Connect the fan's 3-pin connector to an available 3-pin fan header on your motherboard. If a 3-pin header is not available, use the included 3-pin to 4-pin Molex converter to connect directly to your power supply.
5. Pariksa sambungan: Ganda-pariksa sadaya sambungan pikeun mastikeun aranjeunna aman.
6. Tutup wadahna teras hurungkeun: Close your computer case, plug it back in, and power it on. Observe the fan for proper operation and LED illumination.

Image: The AeroCool Silent Master 200mm Blue LED Cooling Fan, showcasing its design and blue LED illumination.

Gambar: Detil view of the fan blades, highlighting the aerodynamic design for high airflow and reduced noise, along with key dimensions.

Parentah Operasi

The AeroCool Silent Master fan operates automatically once connected to a power source. Its speed is typically controlled by the motherboard's fan controller based on system temperature, or it runs at a constant speed if connected via Molex.

• Kontrol Laju Kipas: If connected to a motherboard fan header, fan speed can often be adjusted through your motherboard's BIOS/UEFI settings or dedicated software.
• Lampu LED: The blue LEDs will illuminate automatically when the fan receives power. There are no separate controls for the LEDs on this model.

Pangropéa

• Ngabersihan rutin: Bersihkeun sacara berkala lebu tina bilah kipas sareng pigura nganggo udara anu dikomprés atanapi sikat lemes. Pastikeun komputer dipareuman sareng dicabut tina colokan sateuacan dibersihkeun.
• Pamariksaan: Check for any obstructions or loose cables around the fan that could impede its operation.
• Do not attempt to lubricate the fan bearing, as it is factory-sealed.

Pamérésan masalah

Kipas teu berputar:

- Check if the fan's power connector is securely attached to the motherboard header or Molex connector.

- Ensure the power supply is functioning correctly.

- Verify fan settings in BIOS/UEFI if connected to a motherboard header.

LEDs teu hurung:

- Confirm the fan is receiving power. The LEDs are integrated and should light up with the fan.

Noise kaleuleuwihan:

- Check for loose mounting screws. Tighten if necessary.

- Ensure no cables or other components are touching the fan blades.

- Clean any dust buildup on the fan blades.

spésifikasi

Garansi sareng Rojongan

Kanggo inpormasi garansi sareng dukungan téknis, mangga tingal situs resmi AeroCool. websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.