Corning PBT Red GL32 Threaded High Temperature Screw Cap User Manual

1. Bubuka

This manual provides essential information for the proper use, maintenance, and care of the Corning PBT Red GL32 Threaded High Temperature Screw Cap. Designed for laboratory and industrial applications, these caps offer reliable sealing for various containers.

fitur konci ngawengku:

• Constructed from red polybutylene terephthalate (PBT) for high temperature resistance.
• Features a GL32 thread for secure fitting.
• Capable of dry heat sterilization up to 180°C.
• Equipped with a Polytetrafluorethylene (PTFE) liner for efficient and reliable sealing.

2. Komponén produk

Each case of Corning PBT Red GL32 Threaded High Temperature Screw Caps contains:

• 10 x Corning PBT Red GL32 Threaded High Temperature Screw Caps

3. Setélan

The Corning PBT Red GL32 Threaded High Temperature Screw Cap is designed for straightforward application. Prior to first use, ensure the cap is clean and free from any debris.

This image displays the red Corning PBT GL32 threaded high temperature screw cap. The cap features a ribbed side for easy gripping and a flat top surface with 'CORNING' and 'MAX. TEMP. 180°C' embossed, indicating its brand and maximum temperature rating.

To prepare for use:

1. Inspect the cap for any visible damage or defects. Do not use if damaged.
2. Ensure the container you intend to use has a compatible GL32 thread.
3. Verify the PTFE liner is properly seated inside the cap.

4. Parentah Operasi

Follow these steps for effective sealing:

1. Place the cap squarely onto the threaded neck of the container.
2. Puterkeun tutupna searah jarum jam pikeun ngaitkeun benangna.
3. Tighten the cap firmly by hand until a secure seal is achieved. Avoid overtightening, which can damage the cap or container.
4. When using in high-temperature applications, ensure the temperature does not exceed 180°C.

5. Pangropéa sarta perawatan

Proper maintenance extends the life of your screw caps:

• beberesih: Clean caps with mild detergent and rinse thoroughly with distilled water.
• Sterilisasi: These caps can be dry heat sterilized at temperatures up to 180°C. Ensure caps are completely dry before sterilization.
• Panyimpenan: Store caps in a clean, dry environment away from direct sunlight and extreme temperatures.
• Pamariksaan: Regularly inspect caps for signs of wear, cracking, or damage to the threads or liner. Replace damaged caps immediately.

6. Cara ngungkulan

If you encounter issues with your screw caps, consider the following:

• Leaking Seal:
  • Pastikeun tutupna pageuh pageuh.
  • Check if the PTFE liner is properly seated and undamaged.
  • Verify the container's thread is clean and undamaged.
• Kasusah Ngajait:
  • Ensure the cap is aligned correctly with the container's threads.
  • Check for any debris in the threads of either the cap or the container.
  • Inspect threads for damage.
• Dégradasi Bahan:
  • Ensure operating temperatures do not exceed 180°C.
  • Avoid exposure to chemicals incompatible with PBT or PTFE.

7. Spésifikasi

8. Garansi sarta Émbaran Rojongan

Corning products are manufactured to high quality standards. For specific warranty details and support inquiries, please refer to the official Corning website or contact Corning customer service directly. Warranty terms typically cover manufacturing defects and material integrity under normal use conditions.