Eaton TR7740W-K

Eaton TR7740W-K Combination USB Charger Receptacle User Manual

model: TR7740W-K | merek: Eaton

1. Produk Langkungview

The Eaton TR7740W-K is a combination USB charger and tamper-resistant AC receptacle designed for convenient charging of electronic devices and safe power access. This device integrates two USB charging ports and a standard 125V AC outlet into a single unit, eliminating the need for bulky adapters.

fitur konci ngawengku:

  • Dual USB ports for charging most electronic devices.
  • Energy-efficient design compared to traditional plug-in adapters.
  • LED indicator light to show charging status; turns off upon full charge.
  • 15A 125V tamper-resistant AC receptacle, compliant with 2011 NEC Article 406.12 for child safety.
  • UL approved tamppanutup jandéla anu tahan korosi nyegah asupna barang asing.
  • Backwire clamps on side terminals for easy installation with #12 and #14 AWG wire.
  • Designed to replace existing standard duplex receptacles.

2. Émbaran Kasalametan

PERHATOSAN: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. This device must be installed in accordance with national and local electrical codes.

  • Salawasna pegatkeun sambungan kakuatan saméméh instalasi atawa ngalayanan.
  • Use only with copper wire. Do not use with aluminum wire.
  • Pastikeun sadaya sambungan kabel aman.
  • Alat ieu kanggo dianggo di jero rohangan wungkul.
  • Do not exceed the maximum electrical ratings of the device.
  • Upami anjeun henteu yakin kana bagian mana waé tina pitunjuk ieu, konsultasi ka tukang listrik anu mumpuni.

Proposisi 65 Perhatosan: Produk ieu tiasa ngandung bahan kimia anu dipikanyaho ku Nagara California pikeun nyababkeun kanker sareng cacad kalahiran atanapi cilaka réproduktif sanés.

3. Eusi Paket

  • Eaton TR7740W-K Combination USB Charger Receptacle (White)
  • (3) Pre-stripped 6-inch wire leads
  • Perangkat Keras Pemasangan (sekrup)

4. Setup jeung Instalasi

Installation should be performed by a qualified individual. Follow these steps carefully:

  1. Pareuman Daya: Locate the circuit breaker or fuse box controlling the outlet where you intend to install the receptacle. Turn off the power to that circuit. Verify power is off using a voltage panguji.
  2. Cabut Wadah Lama: Unscrew and carefully pull the existing receptacle from the wall box. Disconnect the wires from the old receptacle. Note the wire connections: typically, black (hot), white (neutral), and bare copper or green (ground).
  3. Siapkeun Kawat: If necessary, strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. The TR7740W-K includes pre-stripped wire leads for convenience.
  4. Sambungan Kawat:
    • Nyambungkeun kawat taneuh tambaga héjo atawa bulistir from the wall box to the green ground screw on the new receptacle.
    • Nyambungkeun kawat bodas (nétral). from the wall box to the silver screw terminal or the white pre-stripped wire lead on the new receptacle.
    • Nyambungkeun kawat hideung (panas). from the wall box to the brass screw terminal or the black pre-stripped wire lead on the new receptacle.
    • For backwire clamps, insert the stripped wire end fully into the clamp opening and tighten the screw firmly.
  5. Wadah Gunung: Taliti nyorong wadah kabel deui kana kotak témbok. Ngamankeun eta kalawan screws ningkatna disadiakeun.
  6. Pasang Wallplate: Tempelkeun pelat témbok hiasan (teu kaasup) kana stop kontakna.
  7. Mulangkeun Daya: Hurungkeun kakuatan deui dina circuit breaker atawa kotak sekering.
Hareupeun view of the Eaton TR7740W-K combination USB charger and AC receptacle, showing two USB ports and one tamper-resistant AC outlet.

Gambar 1: Hareupeun view of the Eaton TR7740W-K, highlighting the USB ports and AC outlet.

Samping view of the Eaton TR7740W-K combination USB charger and AC receptacle, showing wiring terminals and product labels.

Gambar 2: Sisi view of the Eaton TR7740W-K, illustrating the wiring terminals for installation.

5. Parentah Operasi

Using your Eaton TR7740W-K combination receptacle is straightforward:

  • Ngecas USB: Insert your device's USB charging cable into one of the two USB ports. The LED indicator light will glow to confirm that the device is charging. The light will turn off when the device reaches a full charge.
  • Daya AC: Plug any standard 125V AC appliance or charger into the tamper-resistant AC outlet. The tamper-resistant shutters require simultaneous pressure on both slots to open, preventing single-object insertion for enhanced safety.

The USB ports provide a total output of 0.7A (700mA) at 5V DC. While suitable for most smartphones and smaller electronic devices, some high-current devices like certain tablets (e.g., older iPads) may charge slower or not at full speed due to their higher power requirements.

6. Pangropéa

The Eaton TR7740W-K requires minimal maintenance:

  • beberesih: Pegatkeun sambungan kakuatan saméméh beberesih. Ngusap beungeut ku lemes, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
  • Pamariksaan: Periodically inspect the receptacle for any signs of damage, loose connections, or discoloration. If any issues are found, turn off power and consult a qualified electrician for repair or replacement.

7. Cara ngungkulan

MasalahMungkin Cukang lantarananaSolusi
No power to AC outlet or USB ports.Circuit breaker tripped atawa sekering ditiup. Sambungan kabel leupas.Check and reset the circuit breaker or replace the fuse. Turn off power and check wire connections.
USB device not charging or charging slowly.Device requires higher current than supplied (0.7A total). Faulty USB cable. Device not properly connected.Verify device's charging requirements. Use a different USB cable. Ensure cable is fully inserted. Note that some high-power devices may charge slower.
LED indicator not glowing when charging.Device is fully charged. Faulty LED.Check if the device is already fully charged. If not, and the device is charging, the LED may be faulty (does not affect charging function).
Difficulty inserting plug into AC outlet.Tamper-resistant shutters engaged.Apply firm, even pressure to both prongs of the plug simultaneously to engage the shutters. Do not force.

8. Spésifikasi

FiturRincian
Nomer modélTR7740W-K
merekEaton
AC Receptacle Rating15A, 125V AC
Kaluaran USB5V DC, 0.7A (700mA) total
WiringGrounding 2-Tiang, 3-Kawat
WarnaBodas
BahanTambaga
SertifikasiUL Listed, NEMA
Dimensi produkApproximately 9.01 x 4.4 x 6.61 inches (overall package) / 1.9 x 3.8 x 5.9 inches (device)
Item Beurat4.2 ons

9. Garansi jeung Rojongan

For warranty information and technical support, please refer to the official Eaton website or contact Eaton customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Layanan Konsumén Eaton: Mangga didatangan www.eaton.com for contact details and further product information.

Dokumén Patali - TR7740W-K

Praview Eaton FLEXTRAY™ Wire Basket: Katalog Produk sareng Pituduh Instalasi
Katalog komprehensif ngajéntrékeun sistem B-Line Series FLEXTRAY™ Wire Basket Eaton, kaasup fitur, spésifikasi téknis, bagan beban, asesoris, sareng petunjuk pamasangan pikeun aplikasi industri sareng pusat data.
Praview Panduan Pamasangan sareng Pangujian AFCI Sirkuit Cabang Outlet Eaton
Pituduh lengkep pikeun masang sareng nguji stop kontak AFCI Sirkuit Cabang Outlet Eaton, kalebet tindakan pencegahan kaamanan, pitunjuk kabel, prosedur uji coba, ngungkulan masalah, sareng inpormasi garansi.
Praview Eaton GFCI Receptacle Instalasi jeung Testing Guide
Pituduh komprehensif ti Eaton ngajéntrékeun prosedur pamasangan sareng uji anu aman pikeun wadah Ground Fault Circuit Interrupter (GFCI), kalebet petunjuk kabel, pancegahan kaamanan, sareng tip ngungkulan.
Praview Arc Flash Safety eGuide: Understanding and Mitigating Electrical Hazards
This eGuide from Eaton and Consulting-Specifying Engineer provides comprehensive insights into arc flash safety, covering hazard analysis, prevention strategies, mitigation techniques, regulatory compliance, and best practices for electrical systems.
Praview Daptar Indéks Publikasi Téknis Eaton Aerospace Master
Indéks komprehensif ngeunaan publikasi téknis pikeun produk Eaton Aerospace, detil nomer bagian, nomer modél, jinis dokumén, tanggal ngaluarkeun, platform pesawat, sareng situs manufaktur. Daptar ieu janten sumber anu penting pikeun ngajaga sareng ngalayanan komponén aerospace.
Praview Relay Pemantauan Insulasi Eaton EMR6-R400-A-2 - Lembar Data Téknis
Comprehensive technical datasheet for the Eaton EMR6-R400-A-2 insulation monitoring relay, detailing its functions, operating principles, technical specifications, DIP switch settings, electrical connections, and function/wiring diagrams for IT AC and DC systems.