DEWALT D26200-QS Compact Fixed Base Router Instruction Manual

1. Parentah Kasalametan

Salawasna perhatikeun tindakan pencegahan kaamanan dasar nalika nganggo alat listrik pikeun ngirangan résiko kahuruan, sengatan listrik, sareng tatu pribadi. Baca sadaya pitunjuk kalayan saksama sateuacan ngoperasikeun alat ieu.

Peringatan Kasalametan Alat Daya Umum

• Kasalametan Area Gawé: Tetep wewengkon gawé beresih jeung well-cahayana. Wewengkon nu pabalatak atawa poek ngondang kacilakaan. Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
• Kasalametan listrik: Colokan alat listrik kedah cocog sareng stop kontak. Pernah ngarobah colokan dina sagala cara. Hindarkeun kontak awak sareng permukaan bumi atanapi grounded sapertos pipa, radiator, rentang, sareng kulkas.
• Kasalametan Pribadi: Always wear eye protection. Use safety equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection when appropriate. Stay alert, watch what you are doing, and use common sense when operating a power tool.
• Pamakéan sareng Perawatan Alat: Ulah maksakeun alat kakuatan. Anggo alat kakuatan anu leres pikeun aplikasi anjeun. Pegatkeun sambungan colokan ti sumber listrik samemeh nyieun sagala panyesuaian, ngaganti asesoris, atawa nyimpen parabot kakuatan.

Kaamanan Khusus Router

• Pastikeun mata router geus kenceng pageuh dina collet sateuacan dioperasikeun.
• Salawasna tahan router pageuh ku duanana leungeun salila operasi.
• Jaga leungeun tetep jauh tina mata router nalika dioperasikeun.
• Pastikeun workpiece geus aman clampdiedit sateuacan routing.
• Ulah pernah ngahurungkeun router nalika mata bor némpél kana benda kerja.

2. Produk Langkungview

The DEWALT D26200-QS is a 900W compact fixed base router designed for precision woodworking tasks. It features electronic speed control, a robust D-base, and integrated LED lighting for enhanced visibility.

Gambar 1: DEWALT D26200-QS Compact Fixed Base Router. This image shows the complete router unit, highlighting its compact design and yellow and black color scheme.

Fitur konci

• Motor anu kuat: 900W motor provides ample power for various routing applications.
• Kontrol Speed ​​éléktronik: Full wave electronic speed control with feedback maintains selected speed under load, ensuring consistent results in timber, aluminum, and plastics.
• Kacepetan variabel: Adjustable speed from 16,000 to 27,000 RPM for optimal control across different materials and bits.
• D-Base Design: Large 100mm D-Base offers maximum router support on the workpiece, enhancing stability and control.
• Lampu LED ganda: Integrated dual LED lights illuminate the work area, increasing visibility around the router bit for improved accuracy.

Komponén utama

1. Saklar kakuatan: On/Off toggle for tool activation.
2. Pencét Kontrol Kecepatan: Adjusts the rotational speed of the router bit.
3. Collet: Holds the router bit securely.
4. Dasar: Provides a stable platform for routing and includes depth adjustment mechanisms.
5. Depth Adjustment Ring: Allows for precise setting of routing depth.

Gambar 2: Pahareup-hareup view of the power switch on the DEWALT D26200-QS router, showing the 'ON' and 'OFF' positions.

Gambar 3: Pahareup-hareup view of the speed control dial on the DEWALT D26200-QS router, indicating various speed settings.

3. Setélan

Ngabongkar bungkusan

Carefully remove the router and all accessories from the packaging. Inspect the tool for any damage that may have occurred during transit. Retain packaging materials for future storage or transport.

Installing Router Bits

1. Pastikeun router dicabut tina sumber kakuatan.
2. Pencét jeung tahan tombol konci spindle.
3. Loosen nut collet ngagunakeun rengkuh disadiakeun.
4. Insert the router bit into the collet, ensuring at least 3/4 of the shank is seated. Do not bottom out the bit.
5. Kencengkeun mur collet pageuh-pageuh nganggo kunci inggris bari nyekel konci spindel.

Gambar 4: Close-up of the router base and collet area, illustrating where the router bit is inserted and secured.

Nyaluyukeun jero Routing

1. With the router unplugged and the bit installed, place the router on a flat surface.
2. Leupaskeun dasar clamping uas.
3. Rotate the depth adjustment ring to raise or lower the motor assembly until the desired bit protrusion is achieved.
4. Use the fine adjustment knob for precise depth settings.
5. Kencangkeun dasarna clamping lever to secure the depth setting.

Nyambungkeun ékstraksi Debu

For cleaner operation and improved visibility, connect a suitable dust extraction system to the router's dust port. Ensure the hose is securely attached and does not interfere with the router's movement.

4. Parentah Operasi

Ngahurungkeun/Pareuman

To turn the router ON, push the power switch to the 'ON' position. To turn it OFF, push the switch to the 'OFF' position. The router features a soft start to prevent sudden jolts upon startup.

Pamilihan Speed

Rotate the speed control dial (Figure 3) to select the appropriate RPM for your material and router bit. Lower speeds are generally used for larger diameter bits, harder materials, or when making deeper cuts. Higher speeds are suitable for smaller bits and softer materials.

Téhnik Routing

• Edge Routing: For routing edges, ensure the router base is fully supported on the workpiece. Use a fence or guide for straight cuts.
• Arah motong: Always feed the router into the workpiece against the rotation of the bit. This provides better control and prevents the router from running away.
• Sababaraha Pass: For deeper cuts, make several shallow passes rather than one deep pass. This reduces strain on the tool and bit, and improves cut quality.

Gambar 5: An operator using the DEWALT D26200-QS router on a wooden workpiece, demonstrating proper handling and the use of dust extraction.

5. Pangropéa

Regular maintenance ensures the longevity and optimal performance of your DEWALT D26200-QS router.

beberesih

• Salawasna cabut alat sateuacan beberesih.
• Use a soft brush or compressed air to remove dust and debris from the motor vents and around the collet area.
• Lap bagian luar alat ku adamp lawon. Ulah make bahan kimia kasar atawa cleaners abrasive.

Ngaganti Bit

Replace dull or damaged router bits promptly. Using sharp bits improves cut quality and reduces strain on the motor. Follow the bit installation procedure outlined in Section 3.

Pamariksaan

• Periodically inspect the power cord for damage. If damaged, have it replaced by a qualified service technician.
• Pariksa sagala screws na fasteners pikeun tightness.
• Ensure the base clamping lever operates smoothly and securely.

6. Cara ngungkulan

7. Spésifikasi

Technical data for the DEWALT D26200-QS Compact Fixed Base Router:

Gambar 6: The DEWALT D26200-QS router with key dimensions indicated, showing its height and width.

8. Jaminan & Dukungan

Émbaran jaminan

This DEWALT D26200-QS router comes with a garansi 2 taun disayogikeun ku produsén ti tanggal pameseran. Mangga simpen bukti pameseran anjeun kanggo klaim garansi.

Rojongan Palanggan

Pikeun masalah anu aya patalina sareng garansi, eupan balik produk, atanapi bantosan téknis, mangga ngahubungi layanan palanggan DEWALT:

• Nomer Pelayanan Pelanggan: 1860-425-1111
• Jam operasional: Tabuh 10 énjing dugi ka tabuh 5 sonten, Senén dugi ka Jumaah (kajaba libur pamaréntah)

You may also visit the official DEWALT website for additional resources and service center locations.