1. Bubuka
This manual provides comprehensive instructions for the Feit Electric BPESL23T2/2/RP Compact Fluorescent Lamp (CFL). This 23-watt twist-shaped bulb is designed to provide light output equivalent to a 100-watt incandescent bulb, offering significant energy efficiency and a long operational lifespan. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.
Image 1.1: Packaging for the Feit Electric BPESL23T2/2/RP CFL Bulb 2-pack, showing product details and energy savings information.
2. Émbaran Kasalametan penting
Always follow basic safety precautions when installing or replacing light bulbs to reduce the risk of fire, electric shock, or personal injury.
- Pareuman kakuatan: Always disconnect power to the fixture before installing, removing, or inspecting the bulb.
- Ngan ukur di jero ruangan: This bulb is designed for indoor use in dry locations. Do not use in wet or damp environments unless the fixture is specifically rated for such conditions.
- Not for enclosed fixtures: Avoid using this CFL bulb in fully enclosed luminaires, as this can shorten its lifespan.
- Non-dimmable: Bohlam ieu not compatible with dimmer switches. Using it with a dimmer may cause damage to the bulb or the dimmer, and will void the warranty.
- Ngandung Mercury: As a Compact Fluorescent Lamp, this product contains a small amount of mercury. Handle with care. For information on clean-up and safe disposal, visit epa.gov/cfl.
- pembuangan ditangtoskeun: Dispose of used bulbs according to local regulations. Do not dispose of in regular household waste.
- Avoid touching hot bulb: Ngidinan bohlam pikeun niiskeun lengkep sateuacan nanganan.
3. Setup jeung Instalasi
Follow these steps to properly install your Feit Electric CFL bulb:
- Pastikeun Daya Pareum: Before beginning, locate the light switch or circuit breaker controlling the fixture and turn off the power.
- Cabut Bulb Old (upami aya): If replacing an existing bulb, carefully unscrew it counter-clockwise from the socket. Allow it to cool if it was recently on.
- Pasang Bulb Anyar: Gently screw the Feit Electric BPESL23T2/2/RP CFL bulb clockwise into the standard E26 medium screw base socket until it is snug. Do not overtighten.
- Mulangkeun Daya: Hurungkeun deui listrik dina saklar lampu atawa pemutus sirkuit.
Image 3.1: A single Feit Electric BPESL23T2/2/RP CFL bulb, showing its spiral twist shape and E26 medium screw base.
4. Parentah Operasi
Operating your Feit Electric CFL bulb is straightforward:
- Hurungkeun/Pareuman: Anggo saklar témbok standar anu disambungkeun kana lampu anjeun pikeun ngahurungkeun atanapi mareuman bohlam.
- Waktos pemanasan: CFL bulbs require a short warm-up period to reach full brightness. This bulb may take a noticeable amount of time (up to a minute) to achieve its full light output and color temperature after being switched on.
- Non-Dimmable: As stated in the safety information, this bulb is not designed for use with dimmer switches. Attempting to dim this bulb will likely result in flickering, reduced lifespan, or damage.
5. Pangropéa
The Feit Electric CFL bulb requires minimal maintenance to ensure its long life and performance.
- beberesih: Pastikeun listrikna pareum sareng bohlamna tiis sateuacan dibersihkeun. Lap bohlamna ku lawon anu lemes sareng garing. Entong nganggo pembersih cair atanapi bahan anu kasar, sabab ieu tiasa ngaruksak bohlam.
- ngagantian: When the bulb reaches the end of its operational life, replace it following the installation steps outlined in Section 3. Remember to dispose of the old bulb responsibly due to its mercury content.
6. Guide ngungkulan
If you encounter issues with your Feit Electric CFL bulb, refer to the following table for common problems and solutions.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Bohlam teu hurung. | No power to the fixture; Bulb not screwed in properly; Bulb has reached end of life. | Check power switch and circuit breaker. Ensure bulb is securely screwed into socket. Replace bulb if necessary. |
| Bohlamna kedip-kedip atawa redup. | Used with a dimmer switch; Loose connection; Cold ambient temperature. | Ulah make jeung switch dimmer. Ensure bulb is tightly screwed in. CFLs may flicker briefly in very cold conditions until warmed up. |
| Bulb takes a long time to reach full brightness. | Normal operation for CFLs. | This is expected behavior. Allow up to a minute for the bulb to reach full light output. |
| Bulb makes a buzzing sound. | Incompatible fixture; Loose connection; Used with a dimmer. | Ensure the fixture is compatible with CFLs. Tighten the bulb. Ulah make jeung switch dimmer. |
7. Spésifikasi produk
Detailed technical specifications for the Feit Electric BPESL23T2/2/RP CFL bulb:
| Spésifikasi | Nilai |
|---|---|
| merek | Feit Listrik |
| Nomer modél | BPESL23T2/2/RP |
| Tipe Lampu | CFL (Compact Fluoresensi Lamp) |
| Wattage | 23 Watt |
| Pijar Sarua Wattage | 100 Watt |
| Caang | 1600 Lumén |
| Suhu Warna | 2700 Kelvin (Bodas Lemes) |
| Ukuran Bentuk Bohlam | T2 (Twist) |
| Dasar Bulb | E26 (Dasar Screw Sedeng) |
| Voltage | 120 volt |
| Kahirupan Operasi Sumber Cahaya | 12,000 Jam (kira-kira 11 taun dumasar kana 3 jam/dinten) |
| Mangpaat husus Pikeun Produk | Pamakéan jero rohangan wungkul |
| Item Beurat | 0.55 pon |
| UPC | 017801874402 |
Image 7.1: Lighting Facts label, detailing brightness, energy cost, life, light appearance, and energy used for the bulb.
8. Garansi sarta Rojongan Palanggan
Feit Electric products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Feit Electric websitus. Simpen resi pameseran anjeun pikeun klaim jaminan.