1. Bubuka
This manual provides essential information for the safe and efficient operation of your InFocus IN116 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.
Eusi pakét
Pastikeun yén sadaya item anu didaptarkeun di handap kalebet kana pakét anjeun:
- Proyéktor InFocus IN116
- Kabel listrik
- kabel RGB
- Kabel A / V
- parentah kaamanan
- Manual pamaké (dokumén ieu)
- Kadali jauh
- kabel HDMI
2. Produk Langkungview
The InFocus IN116 is a portable DLP projector designed for various applications, offering a native WXGA (1280 x 800) resolution, 2700 ANSI lumens brightness, and a 3000:1 contrast ratio. It features 3D-ready capabilities and multiple input options for flexible connectivity.
Fitur konci
- WXGA (1280 x 800) Native Resolution
- 2700 ANSI Lumens (2200 lumens in Eco Mode)
- 3000: 1 Rasio Kontras
- 3D-Ready functionality
- Nyambungkeun HDMI
- Lila-lila lamp pikeun pamakéan nambahan
- Easy maintenance with no filters to replace
Komponén Projector
Gambar 1: Luhur View. This image displays the top of the InFocus IN116 projector, highlighting the control panel with buttons for power, menu, source selection, and navigation. The lens is visible at the front.
Gambar 2: Sisi View. This image shows the side of the InFocus IN116 projector, featuring prominent ventilation grilles for heat dissipation.
Gambar 3: Hareupeun View. This image presents the front of the InFocus IN116 projector, with the lens actively emitting light, indicating its operational state.
Gambar 4: Tukangeun View (Connectivity Panel). This image details the rear panel of the InFocus IN116 projector, displaying various input and output ports including HDMI, VGA (Computer In 1 & 2, Computer Out), S-Video, Composite Video, Audio In/Out, RS232C, and Mini USB.
3. Parentah Setup
panempatan
Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the unit to prevent overheating. The projector can be placed on a table, ceiling-mounted, or used for rear projection.
Nyambungkeun ka Sumber Daya
- Sambungkeun kabel daya ka stop kontak proyektor.
- Colokkeun tungtung kabel listrik anu sanés kana stop kontak listrik anu dibumikeun.
Connecting Video Sources
The IN116 projector offers multiple input options:
- HDMI: For digital video and audio. Connect an HDMI cable from your source device to the projector's HDMI port.
- VGA (Computer In 1 & 2): For analog computer signals. Use a VGA cable to connect your computer to either VGA input.
- Video komposit: For standard definition video. Connect a composite video cable (yellow RCA) to the projector's Video input.
- S-Video: For enhanced standard definition video. Connect an S-Video cable to the projector's S-Video port.
For audio, connect an audio cable from your source to the projector's Audio In (3.5mm stereo) port if using VGA, Composite, or S-Video. HDMI carries both video and audio.
4. Parentah Operasi
Ngahurungkeun/Pareuman
- Pikeun ngaktipkeun, pencét tombol Kakuatan tombol dina panel kontrol proyéktor atanapi remot kontrol. Lampu indikator daya bakal hurung.
- Pikeun mareuman, pencét tombol Kakuatan button twice. The projector will enter a cooling cycle before shutting down completely.
Milih Sumber Input
Pencét éta Sumber button on the projector or remote control to cycle through available input sources (HDMI, VGA1, VGA2, Video, S-Video). The projector will automatically detect an active signal.
Nyaluyukeun Gambar
- fokus: Puterkeun ring pokus dina lensa proyektor nepi ka gambarna seukeut tur jelas.
- Zum: Saluyukeun cincin zum dina lénsa proyéktor pikeun ngarobih ukuran gambar.
- Koreksi Keystone: If the image appears trapezoidal, use the keystone correction function (usually found in the OSD menu or via dedicated buttons on the remote) to square the image.
- Modeu Gambar: The projector offers various picture modes (e.g., Presentation, Bright, Movie, Eco Mode). Access these through the OSD menu to optimize image quality for different environments.
Modeu Eco
Aktipkeun Modeu Éko pikeun manjangkeun lamp life and reduce power consumption. This mode is ideal for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode, compared to 5,000 hours in normal mode.
Fungsionalitas 3D
The InFocus IN116 is 3D-ready and supports 3D content from compatible sources, including Blu-ray players. To view 3D content, you will need compatible 3D glasses and a 3D-enabled source device. Refer to your 3D source device's manual for specific setup instructions.
Video 1: InFocus IN110xv Series Overview. video ieu nyadiakeun leuwih umumview of the InFocus IN110xv series projectors, which includes the IN116 model. It highlights features such as lamp life, resolution options (including WXGA for IN116), brightness, vivid color technology, and 3D readiness. This video is provided by InFocus Corporation.
5. Pangropéa
Lamp Panggantian
Proyéktor lamp ngabogaan umur kawates. Nalika lamp indicator light illuminates or the image brightness significantly decreases, it's time to replace the lamp. Anu lamp door is conveniently located on top of the projector for easy access, even when ceiling-mounted.
- Power off the projector and disconnect the power cord.
- Allow the projector to cool down completely (at least 30 minutes).
- Panggihan sareng buka lamp door on the top of the projector.
- Taliti nyabut l heubeulamp modul.
- Pasang l anyaramp modulna, mastikeun dipasangna aman.
- Tutup lamp door and reconnect the power cord.
- Ngareset lamp pangatur waktu dina menu OSD proyéktor.
Awas: Proyéktor lamps operate at high temperatures and pressures. Handle with care. In rare cases, lamps can explode. Always wear protective eyewear when replacing a lamp.
beberesih
- Luar: Ngagunakeun lemes, damp cloth to clean the projector's exterior. Do not use abrasive cleaners or solvents.
- Lensa: Use a lens cleaning cloth and lens cleaning solution specifically designed for optical surfaces. Avoid touching the lens with your fingers.
- saringan: The InFocus IN116 projector is designed to operate without user-replaceable filters, simplifying maintenance.
6. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya gambar ditémbongkeun |
|
|
| Gambar kabur |
|
|
| Projector overheats tur pareum |
|
|
| HDMI picture has a blue tint |
|
|
7. Spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | IN116 |
| Téknologi tampilan | DLP |
| Resolusi pribumi | WXGA (1280 x 800) |
| Caang | 2700 ANSI Lumens (2200 lumens Modeu Éko) |
| Babandingan Kontras | 3000:1 |
| Lamp Life (Normal/Eco) | 5,000 jam / 6,000 jam |
| Téhnologi konektipitas | HDMI, VGA (x2), Composite Video, S-Video, Audio In (3.5mm), Audio Out (3.5mm), RS232C, USB B Mini |
| Fitur husus | 3D-Siap |
| Dimensi produk | 12.75 x 12.75 x 5.5 inci |
| Item Beurat | 4.78 pon (2.17 kg) |
| Produsén | Inpokus |
| Tanggal Kahiji Sadia | 1 Méi 2011 |
8. Garansi jeung Rojongan
Garansi kawates
All new DLP projectors from InFocus, including the IN116, are backed by a comprehensive limited warranty:
- Projector: 5-taun jaminan kawates
- Bagian & Buruh: Garansi pinuh 2 taun
- Lamp: 6-garansi sasih
For detailed terms and conditions of the warranty, please refer to the official InFocus websitus atanapi ngahubungan rojongan customer.
Rojongan Palanggan
Kanggo bantosan téknis, ngungkulan masalah, atanapi klaim garansi, mangga ngahubungi dukungan palanggan InFocus. Kunjungi layanan resmi InFocus websitus pikeun inpo kontak jeung sumber tambahan.
Resmi Websitus: www.infocus.com
