Buku Panduan Pangguna Proyektor DLP Portabel InFocus IN112

1. Bubuka

This manual provides essential information for the safe and efficient operation of your InFocus IN112 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

The InFocus IN112 is designed for versatile use, offering high brightness and a strong contrast ratio. It incorporates BrilliantColor technology for clear image reproduction and is 3D-ready. Its compact and lightweight design facilitates easy portability and installation.

2. Naon dina Box

Pastikeun yén sadaya barang anu didaptarkeun di handap kalebet kana bungkusan produk anjeun:

• Proyéktor InFocus IN112
• Kabel listrik
• RGB cable (VGA cable)
• A/V cable (Composite Video cable)
• parentah kaamanan
• Manual pamaké (dokumén ieu)
• Kadali jauh

3. Projector Leuwihview

Gambar 1: Top View - Displays the control panel with buttons for power, source selection, menu navigation, and keystone adjustment, along with the focus ring for the lens.

Gambar 2: Sisi View - Shows the ventilation grilles essential for heat dissipation during operation. Ensure these are not obstructed.

Gambar 3: Angled View kalayan Jauh - Illustrates the projector from an angle, highlighting the lens and the included remote control for convenient operation.

Gambar 4: Tukangeun View - Details the various input and output ports, including power, audio in/out, video, computer (VGA), RS232, and Mini USB.

4. Setélan

4.1 Nempatkeun

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. The distance from the screen will determine the image size. Adjust the projector's position to achieve the desired image size and clarity.

4.2 Sambungan Daya

1. Sambungkeun kabel listrik anu disayogikeun ka inlet listrik proyektor.
2. Colokkeun tungtung kabel listrik anu sanés kana stop kontak listrik anu dibumikeun.

4.3 Nyambungkeun Sumber Input

The IN112 projector offers multiple input options:

• VGA (Computer In 1 & 2): Use the RGB cable to connect to a computer's VGA output.
• Video komposit: Use the A/V cable to connect to devices with composite video output.
• S-Video: Connect to devices with S-Video output.
• Audio Dina: Connect external audio sources using a 3.5mm stereo cable.
• RS232C: For control and automation systems.
• USB B Mini: For control and firmware updates.

Pastikeun sadaya kabel disambungkeun pageuh sateuacan ngahurungkeun proyektor.

5. Parentah Operasi

5.1 Daya Hurung/Pareuman

• Pikeun ngaktipkeun, pencét tombol Kakuatan button on the control panel or remote control. The power indicator light will illuminate.
• Pikeun mareuman, pencét tombol Kakuatan button again. Confirm shutdown if prompted. Allow the projector to cool down before unplugging.

5.2 adjustment Gambar

• fokus: Puterkeun ring pokus dina lensa proyektor nepi ka gambarna seukeut tur jelas.
• Batu konci: Ngagunakeun éta Batu konci buttons on the control panel or remote to correct trapezoidal image distortion if the projector is not perfectly perpendicular to the screen.

5.3 Pamilihan Sumber

Pencét éta Sumber button on the control panel or remote control to cycle through available input sources (VGA1, VGA2, Video, S-Video).

5.4 Navigasi Menu

Pencét éta Menu / Kaluar button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate and the Pilih or Lebetkeun tombol pikeun mastikeun selections. Pencét Menu / Kaluar deui pikeun nutup menu.

5.5 Eco Mode

Aktipkeun Modeu Éko pikeun manjangkeun lamp life and reduce power consumption. This mode is suitable for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode compared to 5,000 hours in normal mode.

5.6 3D Content Projection

The IN112 is 3D-ready. To project 3D content, you will need compatible 3D source material, a 3D-capable player, and active 3D glasses (sold separately). Refer to your 3D source device's manual for specific setup instructions.

6. Pangropéa

6.1 Lamp Panggantian

Proyéktor lamp boga umur nu tangtu. Nalika lamp indikator (Temp/Lamp) illuminates or the image brightness significantly decreases, the lamp may need replacement. The lamp door is conveniently located on the top of the projector for easy access, even when installed.

Awas: Ensure the projector is powered off and completely cooled before attempting lamp replacement. Refer to the detailed lamp replacement instructions in the full service manual for safety and proper procedure.

6.2 beberesih

The IN112 projector is designed without filters, eliminating the need for filter cleaning or replacement. Periodically wipe the exterior casing with a soft, dry cloth. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.

7. Cara ngungkulan

8. Spésifikasi

9. Garansi jeung Rojongan

9.1 Garansi Produk

The InFocus IN112 projector is backed by a comprehensive warranty:

• 5-taun jaminan kawates dina proyektor.
• Garansi pinuh 2 taun ngawengku bagian sareng padamelan.
• 6-garansi sasih dina lamp.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official InFocus warranty documentation or visit the InFocus websitus.

9.2 Rojongan Téknis

For technical assistance, troubleshooting, or service inquiries, please contact InFocus customer support. Contact information can typically be found on the InFocus official websitus atawa dina dokuméntasi kaasup.

10. Related Product Information (IN130 Series)

The following video provides an overview of features found in the InFocus IN130 Series projectors. While specific models may vary, many core functionalities and design principles are shared across InFocus projector lines, offering general insight into InFocus projector capabilities.