Chamberlain 940EV-P2 Keyless Garage Door Access System User Manual

Bubuka

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Chamberlain 940EV-P2 Keyless Garage Door Access System. This wireless keypad offers convenient keyless entry to your garage, enhancing security and accessibility. It is designed for compatibility with most Chamberlain, LiftMaster, and Craftsman garage door openers manufactured from 1993 to the present, specifically those equipped with safety sensors.

Image: The Chamberlain 940EV-P2 Keyless Garage Door Access System, a grey keypad with a flip-up cover, displaying numerical buttons and an 'ENTER' button.

Setup sareng Instalasi

The Chamberlain 940EV-P2 is designed for hassle-free wireless installation and programming, typically completed within minutes. Ensure your garage door opener has a working light bulb, as it serves as a programming indicator.

Sateuacan Anjeun Ngawitan

• Verify compatibility: Works with Chamberlain, LiftMaster, and Craftsman garage door openers from 1993 to present (openers with safety sensors). Not compatible with Craftsman Series 100 or 200.
• Install the included CR123A battery into the keypad.
• Ensure the garage door opener's light bulb is functional.

Ngatur Program Keypad

Follow these steps to program your keypad to your garage door opener:

1. Locate the "Learn" button on your garage door opener. The color of this button (yellow, purple, red/orange, green) indicates the frequency and programming method.
2. Press and release the "Learn" button on your garage door opener. The indicator light will illuminate.
3. Dina 30 detik, lebetkeun Nomer Identifikasi Pribadi (PIN) 4 angka anu dipikahoyong dina keypad.
4. Pencét terus tahan tombol "ENTER" dina keypad.
5. Lepaskeun tombol "ENTER" nalika lampu pambuka panto garasi kedip-kedip atanapi kadéngé dua klik. Ieu nunjukkeun pamrograman anu suksés.
6. Tés keypad-na ku cara ngasupkeun PIN teras mencét "ENTER". Panto garasi kedahna tiasa diaktipkeun.

Tip: For optimal programming success, position the keypad very close to the garage door opener unit during the programming steps. You may need a ladder if the opener is installed high.

Image: A graphic with the text "EZ Fast and Easy Setup" indicating the simplicity of installation.

Ngoperasikeun Keypad

The keypad provides convenient access to your garage without a remote control or key.

Opening/Closing the Garage Door

• To open or close the garage door, enter your 4-digit PIN.
• Press the "ENTER" button. The garage door will activate.
• The keypad features a "one-button close" option. After opening the door with your PIN, you can simply press the "ENTER" button again to close it without re-entering the PIN.

Catetan: If the keypad has been inactive for a period, the first key press may serve to "wake up" the unit. In such cases, the first digit of your PIN might not register. It is recommended to press any key (e.g., "ENTER") to activate the keypad before entering your PIN, or simply re-enter your PIN if the door does not respond on the first attempt.

Programming a Temporary PIN

A temporary PIN can be programmed for deliveries or guests, providing limited access without compromising your primary PIN.

1. Enter your primary 4-digit PIN.
2. Press and hold the "*" button until the garage door opener lights flash.
3. Enter the desired temporary 4-digit PIN.
4. Press the "ENTER" button.
5. The temporary PIN is now active. It will typically work for a single use or a set number of hours, depending on your opener model. Refer to your garage door opener's manual for specific temporary PIN duration settings.

Image: A child interacting with the Chamberlain keypad mounted on a wall next to a garage door, demonstrating ease of use.

Image: A graphic displaying a shield with a padlock icon and the text "Strongest Encryption", highlighting the security features.

Pangropéa

Ngagantian batré

The keypad is powered by one CR123A battery. When the battery is low, the keypad's illumination may dim, or its responsiveness may decrease. To replace the battery:

1. Buka panutup keypad.
2. Locate the battery compartment, typically on the back or inside the unit.
3. Cabut batré CR123A anu lami.
4. Pasangkeun batré CR123A anyar, pastikeun polaritasna bener (+/-).
5. Close the battery compartment and the keypad cover.

Catetan: It is recommended to use a high-quality lithium CR123A battery for optimal performance and longevity.

Pamérésan masalah

If you encounter issues with your Chamberlain 940EV-P2 keypad, refer to the following common problems and solutions:

Image: A graphic showing an illuminated number '1' on a keypad, indicating the illuminated keypad feature for visibility in low light.

spésifikasi

Image: The Chamberlain keypad held in a hand, showing its approximate dimensions of 6.4 inches (16 cm) in length.

Garansi sareng Rojongan

The Chamberlain 940EV-P2 Keyless Garage Door Access System comes with a 1-year warranty from the manufacturer.

For further assistance, technical support, or warranty claims, please refer to the official Chamberlain websitus atanapi ngahubungi layanan palangganna. Anjeun ogé tiasa mendakan sumber daya tambahan sareng FAQ dina CHAMBERLAIN Store on Amazon.

Additional user guides and documents may be available online:

• Manual Pamaké (PDF)
• Pituduh Pamaké (PDF)