Stabila STABILA - 36520

Stabila 36520 24-Inch Electronic Magnetic Dust and Waterproof IP65 TECH Level

Model: STABILA - 36520

1. Bubuka

1.1 Produk Leuwihview

The Stabila 36520 is a 24-inch electronic magnetic level designed for precision measurement in various environments. It features a robust construction that is dust and waterproof to IP65 standards, ensuring durability and reliability. This level is equipped with an illuminated digital display for clear readings, even in low-light conditions. Its magnetic base allows for secure attachment to metallic surfaces, enhancing ease of use.

1.2 Fitur konci

2. Setélan

2.1 Ngabongkar sareng Inspeksi

Carefully remove the Stabila 36520 level from its packaging. Inspect the level for any signs of damage that may have occurred during shipping. Ensure all components, including the level, protective case, and batteries, are present.

Stabila 36520 Electronic Level in its protective case

Figure 2.1: The Stabila 36520 electronic level, typically supplied with a protective case for transport and storage.

2.2 Pamasangan batré

The Stabila 36520 level requires batteries for operation. Locate the battery compartment, typically on the side or back of the electronic module. Open the compartment, insert the specified batteries (usually AA or AAA, check the compartment for markings) ensuring correct polarity (+/-). Close the battery compartment securely.

3. Parentah Operasi

3.1 Operasi Dasar

To power on the level, press the designated power button. The illuminated digital display will activate, showing the current angle or inclination. Place the level on the surface to be measured. The display will provide a real-time reading. For precise measurements, ensure the level is stable and not subject to vibrations.

3.2 Display and Mode Selection

The digital display shows the angle in various units. Use the mode button to cycle through different measurement modes, such as degrees (°), percent (%), or rise and run. The level also allows switching between metric and inch readings. Refer to the on-screen indicators to identify the active mode and unit.

Close-up of Stabila 36520 electronic level display showing a reading and water droplets

Figure 3.1: The illuminated digital display provides clear readings, even when exposed to moisture, demonstrating its IP65 rating.

3.3 Holding Readings

To temporarily hold a reading on the display, press the "Hold" button. This function is useful when you need to move the level but wish to retain the last measured value for reference. Press the "Hold" button again to release the reading and return to live measurement.

3.4 Upside Down Reading

The Stabila 36520 features an automatic display flip function. When the level is inverted (used upside down), the digital display will automatically reorient itself to ensure the numbers are always readable from the user's perspective, eliminating the need to read inverted digits.

3.5 Setting a Reference Angle (0 Degrees)

The level allows you to set any current angle as a new 0-degree reference point. This is particularly useful for measuring relative angles from a non-level surface. Consult the level's specific button layout for the "Set 0" or "Reference" function, typically a dedicated button or a combination press.

4. Pangropéa

4.1 beberesih

Due to its IP65 rating, the Stabila 36520 can be cleaned with a damp cloth. Avoid using abrasive cleaners or solvents that could damage the display or housing. Ensure the level is dry before storing it.

4.2 Panyimpenan

When not in use, store the level in its protective case to prevent damage from impacts or dust. Store in a dry environment, away from extreme temperatures. If storing for extended periods, it is recommended to remove the batteries to prevent leakage.

4.3 Kalibrasi

The level features a calibration button to ensure accuracy over time. If you suspect the level is not providing accurate readings, refer to the manufacturer's instructions for the specific calibration procedure. This typically involves placing the level on a known flat surface and pressing the calibration button.

5. Cara ngungkulan

MasalahMungkin Cukang lantarananaSolusi
Pintonan teu hurung.Batré paéh atawa salah dipasang.Ganti batré, mastikeun polaritasna bener.
Bacaan teu akurat.Level needs calibration; surface is not stable.Perform calibration as per instructions; ensure stable measurement surface.
Tampilanna taram atawa kedip-kedip.Daya batre lemah.Ganti batré.
Tombol-tombol henteu ngaréspon.Temporary software glitch; extreme temperature.Remove and reinsert batteries to reset; allow level to return to operating temperature range.

6. Spésifikasi

AtributNilai
merekStabila
Nomer modélSTABILA - 36520
Panjangna24 inci (kira-kira 61 cm)
Diménsi24.5 "L x 4.5" W
BahanMetal, Impact resistant material
WarnaBlack (electronic module), Yellow (level body)
Item Beurat2 pon
Kelas panyalindunganIP65 (lebu sareng tahan cai)
Sumber DayaBattery Powered (Batteries Included)
Fitur hususDigital display, Magnetic base, Display flip, Hold function, Calibration button, Removable end caps
UPC089634365204
Tanggal Kahiji SadiaPébruari 28, 2011

7. Garansi jeung Rojongan

7.1 Émbaran jaminan

Stabila provides a warranty for the 36520 electronic level. Stabila will repair without charge any defects due to faulty materials or workmanship for 2 years from the date of purchase. Please retain your proof of purchase for warranty claims.

7.2 Rojongan Palanggan

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact Stabila customer support. Refer to the official Stabila website or product packaging for the most current contact information, including phone numbers and email addresses.

Dokumén Patali - STABILA - 36520

Praview STABILA LD 220 Laser Jarak Méter Manual Pamaké
Manual pamaké komprehensif pikeun méteran jarak laser STABILA LD 220, ngawengku produk leuwihview, setelan alat, spésifikasi téknis, kodeu pesen, garansi, sareng inpormasi kontak.
Praview STABILA LAR 160 / LAR 160 G Navodila pikeun uporabo - Rotacijski laser
Celovita navodila za uporabo za rotacijski laser STABILA LAR 160 di LAR 160 G. Vključuje varnostna opozorila, opis elementov naprave, načine delovanja, funkcije, LED prikaze, preverjanje natančnosti di podatke tehnične.
Praview STABILA LAX 300 G Laser Level Parentah Operasi
Instruksi operasi komprehensif pikeun tingkat laser STABILA LAX 300 G, detailing pamakéan dimaksudkeun, komponén utama, modeu operasi, commissioning, cék calibration, sarta spésifikasi teknis.
Praview Pitunjuk Operasi STABILA LAX Seri 600
Pitunjuk operasi anu lengkep pikeun level laser STABILA LAX séri 600, anu ngawengku tujuan panggunaan, komponén unit, komisioning, fungsi, indikator LED, panggunaan braket, pamariksaan akurasi, sareng spésifikasi téknis. Ngawengku pedoman kaamanan sareng prosedur operasional.
Praview Buku Panduan Pangguna Level Laser Rotary STABILA LAR 160 / LAR 160 G
Buku pituduh pikeun level laser puteran STABILA LAR 160 sareng LAR 160 G. Ngawengku parentah operasi, inpormasi kaamanan, fungsi, spésifikasi téknis, sareng cék akurasi pikeun panggunaan profésional di lokasi konstruksi.
Praview Pitunjuk Operasi STABILA LAR 160 / LAR 160 G
Pitunjuk operasi pikeun laser rotasi STABILA LAR 160 sareng LAR 160 G, anu ngawengku tujuan panggunaan, kaamanan, komponén, komisioning, modeu operasi, fungsi, indikator LED, pamariksaan akurasi, sareng data téknis.