Dyson DC35 Digital Slim Multi Floor Cordless Vacuum Cleaner User Manual

1.1 Ngabongkar jeung Majelis

Carefully remove all components from the packaging. Ensure all parts are present before assembly. The main components include the motor unit, wand, motorized cleaner head, and various attachments.

To assemble, connect the wand to the main motor unit until it clicks securely. Then, attach your desired cleaner head or accessory to the end of the wand or directly to the motor unit for handheld use.

1.2 Ngecas Batré

Before first use, fully charge the vacuum cleaner. The Dyson DC35 uses lithium-ion batteries for consistent power.

Gambar: The Dyson DC35 charging on its wall-mounted docking station. The docking station provides convenient storage and ensures the vacuum is always ready for use.

1. Install the wall-mounted docking station in a convenient location near a power outlet. Ensure it is securely fastened to the wall.
2. Plug the charger into the docking station and then into a wall outlet.
3. Place the vacuum cleaner onto the docking station. The indicator light on the battery will illuminate to show it is charging.
4. Ngidinan kurang leuwih 3.5 jam pikeun ngeusi batre pinuh.

2.1 Modeu Kakuatan

The Dyson DC35 features two power modes:

• Modeu standar: Provides up to 15 minutes of powerful fade-free suction for general cleaning.
• Mode Max: Offers 6 minutes of increased suction for more demanding tasks. Activate by pressing the 'MAX' button on the top of the motor unit.

To operate, simply press and hold the power trigger. Release the trigger to turn off the vacuum.

2.2 Cleaning Different Surfaces and Areas

The DC35 is designed for versatile cleaning across various floor types and hard-to-reach areas.

Gambar: A user operating the Dyson DC35 on a hard floor, demonstrating its maneuverability and effectiveness for daily cleaning.

• Lantai teuas: The motorized cleaner head features anti-static carbon fiber brushes to effectively remove fine dust without damaging delicate surfaces.
• Karpét: The motorized cleaner head's stiff nylon bristles agitate carpet pile to remove ground-in dirt.
• Pembersih Jangkauan Tinggi: Attach the wand and a suitable accessory (e.g., combination tool) for cleaning ceilings, curtain rails, and other elevated surfaces.

Gambar: The Dyson DC35 being used to clean a high window frame, showcasing its lightweight design and extended reach for versatile cleaning tasks.

• Tangga sareng Pelapis: Remove the wand to use the vacuum in handheld mode with the motorized cleaner head or other attachments for stairs, car interiors, and furniture.

Gambar: The Dyson DC35 in its handheld configuration, effectively cleaning carpeted stairs. This demonstrates its adaptability for various surfaces and tight spaces.

2.3 Produk Leuwihview Video

Watch this official video for a visual demonstration of the Dyson DC35's features and capabilities.

Video: An official Dyson video showcasing the DC35 Digital Slim Multi Floor Cordless Vacuum Cleaner, highlighting its powerful digital motor, Root Cyclone technology, and versatility for different cleaning tasks.

3.1 Emptying nu Clear Bin

Empty the clear bin as soon as the dirt reaches the MAX level mark. Do not overfill.

Gambar: A hand demonstrating how to empty the clear bin of the Dyson DC35 directly into a waste receptacle, illustrating the hygienic one-touch release mechanism.

1. Cekel panyedot debu di luhur tempat sampah.
2. Press the red bin release button located on the side of the motor unit. The bin base will open, and the dirt shroud will slide down, ejecting dirt.
3. Close the bin base firmly until it clicks into place.

3.2 Ngumbah Filter

Wash the filter at least every month with cold water. Do not use detergents.

1. Twist and lift the filter out from the top of the motor unit.
2. Bilas saringan dina cai tiis anu ngocor dugi ka caina herang.
3. Shake excess water off and leave to dry completely for at least 24 hours in a warm place. Ensure it is absolutely dry before replacing.

3.3 Ngabersihkeun Hambatan

If the vacuum loses suction, check for blockages in the cleaner head, wand, and main motor unit intake. Always ensure the vacuum is turned off before checking for blockages.