Leviton 20A 125V Industrial Grade 4-in-1 Receptacle User Manual

Bubuka

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Leviton 20A 125V Industrial Grade 4-in-1 Receptacle, Model 21254-HI. Please read this manual thoroughly before installation and retain it for future reference.

Émbaran Kasalametan

PERHATOSAN: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.

PERHATOSAN: Anggo alat ieu ngan ukur sareng kawat tambaga atanapi kawat anu dilapis tambaga. Ulah dianggo sareng kawat aluminium.

Fitur produk

• 20 Amp, 125 Volt rating
• Grounding type receptacle
• Durable Nylon body material
• Zinc-plated steel 8-32 mounting screws
• Industrial Series Extra Heavy Duty Hospital Grade design
• 4-in-1 receptacle configuration
• Ivory color finish

Eusi pakét

• 1 x Leviton 20A 125V Industrial Grade 4-in-1 Receptacle (Model 21254-HI)

Image: Leviton 20A 125V Industrial Grade 4-in-1 Receptacle in Ivory. This image shows the front view of the electrical outlet with four receptacles.

Parentah instalasi

1. Pareuman Daya: Locate the circuit breaker or fuse box that controls the power to the outlet where you intend to install the receptacle. Turn off the power completely and verify it is off using a voltage panguji.
2. Cabut Wadah Lama (upami aya): Carefully remove the wall plate and unscrew the old receptacle from the electrical box. Disconnect the wires, noting their connections (hot, neutral, ground).
3. Siapkeun Kawat: Strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. Ensure wires are straight and free of nicks.
4. Sambungkeun kawat:
   • Nyambungkeun kawat taneuh tambaga héjo atawa bulistir ka screw grounding héjo dina wadahna.
   • Nyambungkeun kawat nétral bodas to the silver-colored screw terminals.
   • Nyambungkeun kawat panas hideung atanapi berwarna to the brass-colored screw terminals.

   Ensure all connections are tight and secure. For back-wiring, insert stripped wires into the appropriate holes and tighten screws.

5. Wadah Gunung: Tilepkeun kabel-kabelna kalayan ati-ati kana kotak listrik. Pasangkeun stop kontak anyar kana kotak listrik nganggo sekrup anu disayogikeun.
6. Pasang Plat Tembok: Pasangkeun pelat témbok kana luhureun stop kontakna.
7. Mulangkeun Daya: Hurungkeun kakuatan deui dina circuit breaker atawa kotak sekering.
8. Tes: Test the receptacle with a known working device to ensure proper operation.

Salawasna konsultasi ka tukang listrik anu mumpuni upami anjeun teu yakin ngeunaan bagian mana waé tina prosés pamasangan.

Operasi

The Leviton 21254-HI receptacle provides four outlets for connecting electrical devices. Simply insert the plug of your device into any of the available outlets. This heavy-duty receptacle is designed for demanding environments, offering reliable power connections.

penting: Do not overload the receptacle. Ensure the total current draw of all connected devices does not exceed the 20 Amp rating of the receptacle.

Pangropéa

• beberesih: To clean the receptacle, first turn off the power at the circuit breaker. Use a soft, damp lawon pikeun ngusap beungeut. Ulah make cleaners abrasive atawa pangleyur.
• Pamariksaan: Periodically inspect the receptacle for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is found, turn off power and replace the receptacle immediately.
• Keketatan: Ensure mounting screws and wire connections remain tight. Loose connections can cause overheating.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

For warranty information or technical support, please contact Leviton customer service. Details can typically be found on the product packaging or the official Leviton websitus.

Leviton Resmi Websitus: www.leviton.com