Manual+

Bosch GBH 2400

Bosch GBH 2400 Corded Rotary Hammer Instruction Manual

Model: GBH 2400

1. Bubuka jeung Leuwihview

The Bosch GBH 2400 is a robust corded rotary hammer designed for drilling in concrete, masonry, wood, and metal, as well as for chiseling applications. This manual provides essential information for safe and efficient operation, setup, maintenance, and troubleshooting of your tool.

Bosch GBH 2400 Corded Rotary Hammer

Image 1.1: The Bosch GBH 2400 Corded Rotary Hammer. This image shows the main unit of the rotary hammer, highlighting its compact design and ergonomic handle.

Fitur konci:

  • merek: Bosch
  • Sumber Daya: Kabel Listrik
  • Tipe: Pérsét palu
  • Jumlah modél: GBH 2400
  • Syarat batré: Taya batré diperlukeun
  • Hazardous Material: Not classified as dangerous or hazardous

2. Parentah Kasalametan

Salawasna perhatikeun pancegahan kaamanan di handap ieu pikeun nyegah kejutan listrik, seuneu, sareng tatu anu parah.

Peringatan Kasalametan Alat Daya Umum:

  • Kasalametan Area Gawé: Tetep wewengkon gawé beresih jeung well-cahayana. Wewengkon nu pabalatak atawa poek ngondang kacilakaan. Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
  • Kasalametan listrik: Colokan alat listrik kedah cocog sareng stop kontak. Pernah ngaropéa colokan dina sagala cara. Entong nganggo colokan adaptor sareng alat listrik anu dibumikeun (dibumi). Hindarkeun kontak awak sareng permukaan bumi atanapi grounded.
  • Kasalametan Pribadi: Always wear eye protection. Use hearing protection when operating the tool for extended periods. Wear a dust mask if working in dusty conditions. Dress properly; avoid loose clothing or jewelry.
  • Pamakéan sareng Perawatan Alat: Ulah maksakeun alat kakuatan. Anggo alat kakuatan anu leres pikeun aplikasi anjeun. Pegatkeun sambungan colokan ti sumber listrik samemeh nyieun sagala panyesuaian, ngaganti asesoris, atawa nyimpen parabot kakuatan.
  • jasa: Gaduh alat listrik anjeun dilayanan ku jalma perbaikan anu mumpuni ngan ukur nganggo suku cadang anu sami. Ieu bakal mastikeun yén kasalametan alat kakuatan dijaga.

3. Setélan

Before operating the Bosch GBH 2400, ensure proper setup for safety and optimal performance.

Ngalampirkeun gagang bantu:

  1. Leupaskeun gagang bantu ku cara muterkeunana sabalikna jarum jam.
  2. Slide the auxiliary handle onto the tool's neck until it is in a comfortable and secure position.
  3. Tighten the auxiliary handle by turning it clockwise. Ensure it is firmly secured before use.

Inserting and Removing Drill Bits/Chisels (SDS-plus System):

  1. Clean the shank of the drill bit/chisel and apply a thin layer of grease.
  2. Insert the drill bit/chisel into the tool holder by rotating it until it engages. Pull on the bit to ensure it is locked. The SDS-plus system allows for slight axial movement, which is normal.
  3. To remove, pull back the locking sleeve and pull the drill bit/chisel out of the tool holder.

4. Parentah Operasi

Understand the different operating modes and how to use your rotary hammer effectively.

Saklar Pamilih Mode:

The GBH 2400 features a mode selector switch to choose between different functions:

  • Palu pangeboran: Pikeun pangeboran di beton jeung masonry kalawan dampak.
  • Pangeboran: For drilling in wood, metal, ceramics, and plastic without impact.
  • Pahat: For light chiseling work (e.g., removing tiles, light demolition).

To change the operating mode, rotate the mode selector switch to the desired symbol. Ensure the tool is unplugged when changing modes to prevent accidental activation.

Mimitian sareng eureun:

  • Pikeun ngamimitian alat, pencét tombol Hurung / Pareum.
  • To stop the tool, release the On/Off switch.
  • For continuous operation, press the On/Off switch and then press the lock-on button. To switch off, press the On/Off switch again.

Tips gawé:

  • Salawasna amankeun benda kerja anjeun.
  • Apply moderate pressure; do not force the tool.
  • For deep holes, periodically withdraw the drill bit to clear dust.

5. Pangropéa

Regular maintenance ensures the longevity and safe operation of your Bosch GBH 2400.

beberesih:

  • Salawasna cabut alat sateuacan beberesih.
  • Tetep bukaan ventilasi bersih pikeun nyegah overheating motor.
  • Clean the tool holder regularly to ensure proper function of the SDS-plus system.

Sikat Karbon:

The carbon brushes wear out over time. When they are worn, the tool may spark excessively or stop working. Have carbon brushes replaced by an authorized Bosch service center to ensure proper function and safety.

Lubrication:

The SDS-plus tool holder requires periodic lubrication. Apply a small amount of special grease to the shank of the drill bit before insertion to reduce wear and improve performance.

6. Cara ngungkulan

Tingali kana bagian ieu pikeun masalah umum sareng solusina.

Masalah Mungkin Cukang lantaranana Solusi
Alat henteu ngamimitian. Taya catu daya; switch lepat; sikat karbon dipaké. Check power connection. Test outlet. If switch or brushes are suspected, contact service.
Reduced impact power. Worn drill bit; insufficient lubrication of tool holder; internal wear. Replace drill bit. Lubricate drill bit shank. Contact service for internal issues.
Percikan api dina motor kaleuleuwihi. Worn carbon brushes; motor overload. Have carbon brushes checked/replaced. Reduce load on the tool.
Drill bit not locking in holder. Tool holder dirty; damaged locking mechanism. Clean tool holder thoroughly. If damaged, contact service.

7. Spésifikasi

Detailed technical specifications for the Bosch GBH 2400 rotary hammer.

  • Pabrikan: Bosch
  • Jumlah modél: GBH2400
  • Beurat barang: 2.9 kg
  • Ukuran produk: 37.7 x 21 x 8.3 cm
  • Bahan: logam
  • Tipe Sumber Daya: Kabel Listrik
  • Voltage: 230 volt
  • Wattage: 720 Watt
  • Peunteun ayeuna: 3.04 Amps
  • Jenis bor: Pérsét palu
  • Komponén Kaasup: Chuck key, basic accessories
  • Batré Kaasup: No
  • Batré diperlukeun: No
  • Tanggal munggaran sayogi: 7 Januari 2010

8. Garansi jeung Rojongan

For warranty information, please refer to the warranty card included with your product or visit the official Bosch Professional website. For technical support, spare parts, or service inquiries, please contact your local authorized Bosch service center.

You can find contact details for Bosch service centers on the official Bosch Professional websitus: www.bosch-professional.com