1. Produk Langkungview
The GE Z-Wave Wireless Lighting Control Three-Way On/Off Kit provides wireless control for hardwired incandescent, LED, xenon, halogen, and fluorescent lighting. This kit is designed to replace existing three-way switch configurations, allowing control of a single light fixture from two distinct locations. The primary switch features a blue LED indicator for easy location in low-light conditions.
Z-Wave technology enables integration into a smart home ecosystem. When connected to a Z-Wave certified gateway (sold separately), users can manage lighting remotely via a smartphone, tablet, or computer. This system supports scheduling, scene creation, and can enhance home security by simulating occupancy.
Figure 1: GE Z-Wave Wireless Lighting Control Three-Way On/Off Kit (Retail Packaging)
2. Émbaran Kasalametan
PERHATOSAN: RISIKO KEUNGGULAN LISTRIK. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before wiring. Consult a qualified electrician if you are unsure about any part of the installation process.
- Ensure all wiring is compliant with national and local electrical codes.
- Do not connect 120V (Hot or Neutral) wires to the traveler circuit, as this will damage the units.
- This device requires a neutral wire for proper operation. Verify neutral wiring is present in your electrical box before installation.
- Pikeun pamakéan indoor wungkul.
3. Eusi Paket
- 1 x GE Z-Wave Primary On/Off Switch
- 1 x GE Z-Wave Auxiliary On/Off Switch
- Installation Guide (refer to the included PDF manual for detailed diagrams)
Gambar 2: Hareupeun view of the GE Z-Wave Primary and Auxiliary Switches
4. Setup jeung Instalasi
This kit is designed to replace an existing three-way circuit. It is crucial to identify and label all wires from your existing switches before disconnecting them.
4.1 Pertimbangan Kabel
- Kawat nétral: A neutral wire is required for both the primary and auxiliary switches. In many older homes, neutral wires may be bundled and capped at the back of the electrical box. You may need to extend a wire from this bundle to connect to the switch.
- Kawat Wisatawan: A traveler wire connects the primary and auxiliary switches. This is a physical wire connection, despite the