Geberit 151.506.00.1 TurnControl Bath Waste & Overflow Rough-In Unit Instruction Manual

1. Produk Langkungview

The Geberit 151.506.00.1 is a TurnControl cable-operated bath waste and overflow rough-in unit. This unit is designed to manage the drainage and overflow functions of a bathtub. Its unique design positions critical working parts outside the waterway, minimizing the risk of clogging. The high-quality cable is crafted from Teflon-coated stainless steel with a plastic sleeve, ensuring reliable and long-lasting performance.

This rough-in body is compatible with most bathtubs ranging from 17 to 24 inches deep and with wall thicknesses between 1/16 to 5/16 inches. It accommodates 2-inch diameter drain hole openings and 2 to 2.5-inch diameter overflow hole openings. Please note that this product is the rough-in body only and requires a separate Euro or Traditional TurnControl trim kit for complete installation and operation.

2. Komponén Kaasup

• Geberit 151.506.00.1 Rough-In Body
• 27-inch Teflon-coated stainless steel cable
• parabot instalasi
• Bahan pengikat

Note: Trim kit for the bath waste and overflow is sold separately.

3. Setup jeung Instalasi

Installation of the Geberit 151.506.00.1 rough-in unit should be performed by a qualified professional in accordance with local plumbing codes. This unit is designed for 1-1/2 inch PVC Schedule 40 piping.

3.1 Cék Pra-Pamasangan

• Verify tub compatibility: The unit fits tubs 17-24 inches deep with wall thicknesses of 1/16-5/16 inches.
• Ensure drain hole opening is 2 inches in diameter.
• Ensure overflow hole opening is 2 to 2.5 inches in diameter.
• Pastikeun sadaya komponén anu kalebet aya.

3.2 Léngkah-léngkah Pamasangan (Panduan Umum)

1. Prepare the Tub: Ensure the drain and overflow holes in the bathtub are clean and free of debris.
2. Position the Rough-In Unit: Insert the overflow assembly into the overflow hole and the drain assembly into the drain hole from the underside of the tub.
3. Sambungan Aman: Use the provided fastening material to secure the rough-in unit to the tub. Ensure a watertight seal using appropriate plumbing sealant as required.
4. Sambungkeun ka Sistem Drainase: Connect the 1-1/2 inch PVC Schedule 40 piping from the rough-in unit to the household drainage system. Use PVC cement for secure and leak-proof connections.
5. Routing kabel: Route the 27-inch Teflon-coated stainless steel cable as per the specific instructions provided with the trim kit. The cable connects the TurnControl mechanism to the drain stopper.
6. Uji bocor: After installation, fill the tub with water and check for any leaks around the drain, overflow, and all pipe connections before proceeding with finishing work.

Figure 1: Geberit 151.506.00.1 TurnControl Bath Waste & Overflow Rough-In Unit. This image shows the PVC construction and the cable mechanism of the rough-in unit.

4. Parentah Operasi

The Geberit 151.506.00.1 rough-in unit operates in conjunction with a compatible TurnControl trim kit (sold separately). Once the trim kit is installed, the drain is controlled by a rotary mechanism, typically located on the overflow plate.

• Pikeun nutup solokan: Rotate the TurnControl knob or lever on the trim kit in one direction (refer to your trim kit's specific instructions for direction). This action will lower the drain stopper, sealing the tub.
• Pikeun muka solokan: Rotate the TurnControl knob or lever in the opposite direction. This action will lift the drain stopper, allowing water to drain from the tub.

Ensure the TurnControl mechanism moves freely and the drain stopper responds correctly. If resistance is felt, do not force the mechanism.

5. Pangropéa

The Geberit TurnControl bath waste and overflow system is designed for minimal maintenance due to its robust construction and the placement of critical components outside the waterway.

• Inspeksi périodik: Periodically check the operation of the TurnControl mechanism and the drain stopper. Ensure smooth movement and proper sealing.
• beberesih: Clean the visible parts of the trim kit according to the manufacturer's instructions for the trim kit. Avoid harsh abrasive cleaners that could damage the finish.
• Cable Durability: The Teflon-coated stainless steel cable with a plastic sleeve is designed for long-term, trouble-free service. No specific lubrication or maintenance is typically required for the cable itself.
• Pencegahan halangan: While the design reduces clogging, avoid pouring harsh chemicals or large debris down the drain to maintain optimal performance.

6. Cara ngungkulan

If you encounter issues with your Geberit bath waste and overflow unit, consider the following common troubleshooting steps:

• Ngalir laun: If water drains slowly, check for obstructions in the visible drain opening. While the design minimizes clogs in the cable mechanism, hair or soap buildup can still occur in the drain pipe. Use a plumbing snake or appropriate drain cleaner if necessary.
• Drain Not Sealing: Ensure the TurnControl mechanism is fully engaged to the closed position. Inspect the drain stopper for any debris preventing a complete seal. If the stopper itself is damaged or misaligned, it may need adjustment or replacement (part of the trim kit).
• TurnControl Mechanism Stiff or Not Operating: This could indicate an issue with the cable or the trim kit's rotary mechanism. Do not force it. Check if the trim kit is properly installed and secured. If the issue persists, professional inspection may be required.
• Bocor: Leaks typically occur at connection points. If a leak is detected, immediately turn off the water supply to the tub (if applicable) and inspect all plumbing connections for tightness and proper sealing. Re-sealing or tightening connections may be necessary.

For persistent issues or if you are unsure about performing repairs, it is recommended to contact a qualified plumber or Geberit customer support.

7. Spésifikasi

8. Émbaran jaminan

Geberit Bath Waste and Overflow products are warranted against defects in material and workmanship for the life of the Products. For Products used in residential applications, the finish of the Product is warranted against material manufacturing defects for a period of five years from the date of Product purchase.

Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the official Geberit warranty documentation or contact Geberit customer service.

9. Rojongan

For technical assistance, installation questions, or warranty inquiries, please contact Geberit customer support. It is recommended to have your product model number (151.506.00.1) and date of purchase available when contacting support.

You may also consult a qualified plumbing professional for installation or service needs.