Leviton 6526-W Combination Decora Switch with LED Guide Light User Manual

Bubuka

This manual provides instructions for the safe installation, operation, and maintenance of your Leviton 6526-W 15-Amp 120V AC Combination Decora Switch with LED Guide Light. This device combines a standard electrical switch with an energy-efficient LED guide light, designed for residential and commercial applications.

Émbaran Kasalametan

PERHATOSAN: Pikeun nyingkahan kahuruan, kejutan, atanapi maot, pareuman daya dina pemutus sirkuit atanapi kotak sekering teras uji heula sateuacan dipasang kabel.

Alat ieu kedah dipasang saluyu sareng sadaya kode listrik nasional sareng lokal.

penting: This switch requires a neutral wire for proper operation of the LED guide light feature. If your electrical box does not contain a neutral wire, consult a qualified electrician.

Use only copper wire. Do not use with aluminum wire.

Ulah ngaleuwihan ratings listrik maksimum 15 Amps and 120 Volts AC.

Eusi pakét

• Leviton 6526-W 15-Amp 120V AC Combination Decora Switch with LED Guide Light (White)

spésifikasi

Parentah instalasi

1. Pareuman Daya: Locate the circuit breaker or fuse that supplies power to the switch location. Turn it OFF. Verify power is off using a voltage panguji.
2. Hapus Switch Old: Carefully remove the existing wall plate and switch from the electrical box. Disconnect the wires from the old switch.
3. Identipikasi Kawat:
   • Kawat Panas (Jalur): Biasana hideung, ngaluarkeun daya tina pemutus sirkuit.
   • Kawat beban: Typically black, sends power to the light fixture or appliance.
   • Kawat nétral: Typically white, required for the LED guide light.
   • Kawat taneuh: Biasana tambaga polos atanapi héjo.

   If you are unsure about wire identification, consult a qualified electrician.
4. Pasangkeun Saklar Anyar:
   • Nyambungkeun Hot (Line) wire to one of the brass screws on the switch.
   • Nyambungkeun Ngamuat kawat to the other brass screw on the switch.
   • Nyambungkeun Kawat nétral to the silver screw on the switch.
   • Nyambungkeun Kawat taneuh to the green screw on the switch.

   Ensure all wire connections are secure. For screw terminals, wrap the wire clockwise around the screw and tighten.

5. Pasang saklar: Carefully push the wired switch into the electrical box. Secure it with the mounting screws provided.
6. Pasang Plat Tembok: Attach the Decora wall plate over the switch.
7. Mulangkeun Daya: Hurungkeun kakuatan deui ON di circuit breaker.

Operasi

The Leviton 6526-W features a standard rocker switch for controlling your connected load (e.g., light fixture, fan) and an integrated LED guide light.

Fungsi Pindah

Press the top or bottom of the rocker switch to turn the connected load ON or OFF.

LED Guide Light Function

The LED guide light automatically turns ON when ambient light levels are low and turns OFF when sufficient light is detected. This provides a soft, ambient light for navigation in dark areas. The guide light operates independently of the main switch function.

Pangropéa

This device requires minimal maintenance.

• Periodically clean the surface with a soft, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
• Ensure the wall plate is securely fastened.
• The LED guide light is designed for long life and does not require bulb replacement.

Pamérésan masalah

Problem: The LED guide light does not turn on.

Solusi:

• Verify that the neutral wire is correctly connected to the silver terminal screw on the switch. A neutral connection is essential for the LED guide light to function.
• Ensure power is supplied to the switch. Check the circuit breaker.
• Confirm that the ambient light sensor is not obstructed and that the room is sufficiently dark for the LED to activate.

Problem: The switch does not control the connected load.

Solusi:

• Ensure the hot (line) and load wires are correctly connected to the brass terminal screws. If the LED works but the switch doesn't, try swapping the two black wires connected to the brass screws.
• Pariksa circuit breaker pikeun mastikeun kakuatan on.
• Verify that the connected load (e.g., light bulb) is functional.

Problem: The switch feels loose in the wall box.

Solusi:

• Tighten the mounting screws that secure the switch to the electrical box.

Garansi sareng Rojongan

For warranty information or technical support, please contact Leviton customer service or visit the official Leviton websitus. Simpen resi pameseran anjeun pikeun klaim jaminan.

Sumberdaya tambahan

For more information on Leviton products and electrical safety, visit the Leviton Store dina Amazon.