1. Bubuka
This manual provides instructions for the installation, configuration, and operation of your ASUS RT-N13U Wireless-N Router. The RT-N13U is a versatile networking device capable of functioning as a wireless router, an access point, or a wireless repeater. It also features a USB 2.0 port for enhanced functionalities such as printer sharing, FTP hosting, network storage, and direct BitTorrent downloading.
Mangga baca heula buku panduan ieu kalawan saksama sateuacan nganggo alat ieu pikeun mastikeun setelan anu leres sareng kinerja anu optimal.
2. Produk Langkungview
2.1 Fitur konci
- EZ All-in-One Printer Sharing: Utilize the USB port to share a printer across your network.
- EZ Switch: Easily switch between Router, Repeater, and Access Point modes with a single touch.
- Enhanced Download Master: Ngundeur files directly to a connected USB hard drive even when your computer is off.
- Wireless-N Connectivity: Supports 802.11b/g/n standards for high-speed wireless networking.
- 4 LAN Ports: Provides four 10/100 Mbps Ethernet ports for wired connections.
- Diagnostic and Bandwidth Management Tools: Includes Dr. Surf and EZQoS for network monitoring and quality of service management.
2.2 Eusi pakét
- ASUS RT-N13U Wireless-N Router
- Adaptor kakuatan
- Kabel Ethernet
- Gancang Mimitian Guide
- Support CD (containing user manual and utilities)
2.3 Antarbeungeut hardware
Familiarize yourself with the ports, buttons, and LED indicators on your RT-N13U router.

Gambar 1: Hareup sareng Sisi View of the ASUS RT-N13U Router. This image shows the front panel with LED indicators for Power, Wireless, Internet, and LAN ports (1-4), along with the WPS button.

Gambar 2: Tukangeun View of the ASUS RT-N13U Router. This image displays the rear panel, including the USB 2.0 port, four LAN ports (yellow), one Internet (WAN) port (blue), and the power input port.
Indikator LED:
- LED kakuatan: Nunjukkeun status daya. Héjo polos pikeun operasi normal.
- LED nirkabel: Indicates wireless activity. Blinks when data is being transmitted wirelessly.
- Internét LED: Indicates internet connection status. Solid green for connected, blinking for activity.
- LAN 1-4 LEDs: Indicate activity on the respective LAN ports. Solid green for connected, blinking for activity.
- LED WPS: Indicates Wi-Fi Protected Setup status.
Palabuhan sareng Tombol:
- Palabuhan USB 2.0: For connecting USB devices such as printers or external storage.
- Port LAN (1-4): Connect wired devices like computers or gaming consoles.
- Palabuhan Internét (WAN): Nyambung ka modem Anjeun pikeun aksés internét.
- Palabuhan Daya: Nyambungkeun kana adaptor kakuatan anu kalebet.
- Tombol WPS: Initiates Wi-Fi Protected Setup for easy wireless connection.
- Tombol Reset: (Typically a small pinhole button) Used to restore factory default settings.
- EZ Switch: A physical switch to change the device's operating mode (Router, AP, Repeater).
3. Setélan
3.1 Sambungan Hardware Awal
- Connect the power adapter to the router's Power port and plug it into a power outlet.
- Connect one end of the Ethernet cable to the Internet (WAN) port of the RT-N13U and the other end to your modem's Ethernet port.
- (Optional) For initial configuration, connect your computer directly to one of the LAN ports (1-4) on the router using an Ethernet cable.
- Power on your modem, then power on the RT-N13U router. Wait for the Power, Internet, and Wireless LEDs to stabilize.
3.2 Configuration Modes
The RT-N13U supports three operating modes, selectable via the EZ Switch:
- Modeu Router: The default mode, where the device acts as a gateway for your network, providing internet access and managing local network traffic.
- Modeu Access Point (AP): Extends an existing wired network by adding wireless connectivity. In this mode, internet features are typically disabled, and the device acts as a wireless hub.
- Modeu Repeater: Extends the range of an existing wireless network by receiving and re-transmitting the wireless signal.
Select the desired mode using the physical EZ Switch on the router before proceeding with software configuration.
3.3 Web Aksés Interface
- Buka a web browser (e.g., Chrome, Firefox, or IE8/Edge; IE9 beta may have compatibility issues).
- Dina bilah alamat, ketik alamat IP standar router (biasana
192.168.1.1orrouter.asus.com) terus pencét Lebetkeun. - Lebetkeun nami pangguna sareng kecap konci standar (biasana
adminfor both). Refer to the label on the bottom of your router if these defaults do not work. - Follow the on-screen setup wizard.
3.4 Internet Connection Setup (Router Mode)
If the EZ UI setup feature does not automatically configure your internet connection, manual steps may be required, especially for certain Internet Service Providers (ISPs).
- Gather Information:
- Your computer's MAC address (Physical Address). On Windows, open Command Prompt and type
ipconfig /all. - Your ISP's DNS server addresses. If connected via Ethernet, use
ipconfig /allto find "DNS Servers".
- Your computer's MAC address (Physical Address). On Windows, open Command Prompt and type
- Access Network Map: Dina router urang web interface, navigate to the "Network Map" or "EZ-UI" section.
- Konfigurasi Manual: If the connection fails, the system may prompt for manual configuration.
- Mangpaatkeun Mac Klon feature. Some ISPs tie your internet service to a specific MAC address. Cloning your computer's MAC address to the router can resolve connectivity issues.
- Manually enter your ISP's DNS server addresses if required.
- Apply Settings and Restart: Apply the new settings. The router will restart. Your computer may temporarily lose connection. Reconnect to the router.
- Power Cycle (If Needed): If the internet connection is still not established:
- Power off the wireless router.
- Power off your modem/ISP's box.
- Antosan 5 menit.
- First, power on the modem/ISP's box and wait for it to fully boot.
- Then, power on the ASUS RT-N13U router.
- Check for internet connectivity.
Note: For optimal wireless performance, ensure the wireless radio is set to "N only" mode in the router's settings if all your devices support 802.11n.
4. Operasi
4.1 Nyambungkeun Alat
Sambungan kabel:
Connect Ethernet-enabled devices (e.g., desktop computers, smart TVs, gaming consoles) to the yellow LAN ports (1-4) on the back of the router using Ethernet cables.
Sambungan nirkabel:
- Dina alat nirkabel anjeun (laptop, smartphone, tablet), milarian jaringan Wi-Fi anu sayogi.
- Select the network name (SSID) of your ASUS RT-N13U (default SSID is usually "ASUS" or "ASUS_RT-N13U").
- Enter the network security key (password). This can be found on a label on the router or in the router's web panganteur.
- Alternatively, press the WPS button on the router and then activate WPS on your wireless device within two minutes for a quick connection.
4.2 USB Features
The USB 2.0 port on the RT-N13U provides additional functionalities:
Babagi Printer:
Connect a compatible USB printer to the USB 2.0 port. Configure printer sharing through the router's web interface to allow multiple computers on your network to print to it.
Download Master:
Connect a USB storage device (e.g., external hard drive, flash drive) to the USB 2.0 port. The Download Master feature allows you to initiate downloads (including BitTorrent) directly to the connected storage device, even when your computer is turned off. This feature typically works only when the router is in Router Mode.
Note: Ensure the USB storage device is formatted correctly and recognized by the router. For BitTorrent downloads, you may need to provide the exact URL location for the downloader to function properly.
5. Pangropéa
5.1 Apdet firmware
Regularly updating the router's firmware is crucial for performance improvements, security enhancements, and bug fixes. Visit the official ASUS support website for the RT-N13U model to download the latest firmware. Follow the instructions provided with the firmware update package carefully to avoid damaging the device.
Note: Firmware updates can resolve many common issues and improve compatibility with various devices and services.
5.2 Malikkeun Defaults Factory
If you encounter persistent issues or forget your login credentials, you can restore the router to its factory default settings. This will erase all custom configurations.
- With the router powered on, locate the Reset button (often a small pinhole) on the device.
- Use a paperclip or a similar pointed object to press and hold the Reset button for approximately 5-10 seconds.
- Release the button when the Power LED starts blinking rapidly or all LEDs briefly flash.
- The router will restart with factory default settings. You will need to reconfigure it from scratch.
6. Cara ngungkulan
6.1 Isu umum jeung Solusi
- Henteu aya sambungan internét:
- Check all cable connections (modem to router WAN port, router to computer LAN port).
- Perform a power cycle on both your modem and router (unplug, wait 5 minutes, plug modem first, then router).
- Verify your ISP settings in the router's web interface, especially if MAC cloning or specific DNS servers are required.
- Ensure the router is in the correct operating mode (Router Mode for internet access).
- Teu Bisa Ngaksés Router Web panganteur:
- Pastikeun komputer anjeun nyambung ka router (kabel atanapi nirkabel).
- Verify the IP address (e.g.,
192.168.1.1) is correct. - Coba béda web browser.
- Pareuman heula firewall atawa software antivirus dina komputer anjeun samentawis.
- If you forgot the password, perform a factory reset (see Section 5.2).
- Gancangna Nirkabel atawa Sambungan Pegat:
- Pastikeun firmware router parantos mutahir.
- Check for wireless interference from other devices (cordless phones, microwaves).
- Adjust the wireless channel in the router settings.
- Position the router in a central location, away from obstructions.
- If all devices support 802.11n, set the wireless mode to "N only" for higher speeds.
- Alat USB Teu Dipikawanoh:
- Ensure the USB device is properly connected and powered (if external power is required).
- Pariksa router-na web interface for USB device status and configuration.
- Verify compatibility of the USB device with the router.
- Ensure the router is in Router Mode for USB features like Download Master.
6.2 Harti Indikator LED
| Indikator LED | Status | Katerangan |
|---|---|---|
| Kakuatan | Héjo padet | Alat dihurungkeun tur beroperasi normal. |
| Pareum | Alat dipareuman. | |
| Nirkabel | Héjo padet | Fungsi nirkabel diaktipkeun. |
| Kedip-kedip Héjo | Wireless data transmission is active. | |
| Internét | Héjo padet | Nyambung ka Internét. |
| Kedip-kedip Héjo | Internet data transmission is active. | |
| Pareum | Taya sambungan internét. | |
| LAN 1-4 | Héjo padet | A device is connected to the corresponding LAN port. |
| Kedip-kedip Héjo | Data transmission is active on the corresponding LAN port. | |
| WPS | Ngacapruk | WPS connection process is active. |
7. Spésifikasi
| Fitur | Rincian |
|---|---|
| Ngaran modél | RT-N13U |
| Tanpa kabel | 802.11b/g/n |
| Pita frékuénsi | Pita Tunggal (2.4 GHz) |
| Téhnologi konektipitas | Nirkabel, Ethernet |
| palabuhan Ethernet | 4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN |
| Port USB | 1 x USB 2.0 |
| Jenis anteneu | Internal |
| Fitur husus | Access Point Mode, Repeater Mode, WPS, Printer Sharing, Download Master |
| Dimensi produk | 10 x 8.88 x 3.75 inci |
| Item Beurat | 5.3 ons (kira-kira 150 gram) |
| Produsén | ASUS |
| Tanggal Sadia munggaran | 28 Séptémber 2009 |
8. Émbaran Kasalametan
- Use only the power adapter provided with the device. Using an incompatible adapter may damage the device and void your warranty.
- Ulah ngalaan alat ka cai, beueus, atawa suhu ekstrim.
- Teundeun alat dina wewengkon well-ventilated pikeun nyegah overheating.
- Ulah muka alat casing. Pangropéa ngan ukur kedah dilakukeun ku tanaga anu diidinan.
- Jauhkeun alat tina médan éléktromagnétik anu kuat.
9. Garansi jeung Rojongan
For warranty information, technical support, and further assistance, please visit the official ASUS support website or contact ASUS customer service. Details can typically be found on the ASUS websitus atanapi dina dokuméntasi anu kalebet sareng produk anjeun.
Rojongan ASUS Websitus: www.asus.com/support/





