Bubuka
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Litex Celeste Collection 42-Inch Ceiling Fan. Please read all instructions carefully before beginning installation to ensure proper function and safety. This ceiling fan is designed for small indoor rooms and features a flush mount installation.
Émbaran Kasalametan
Always disconnect power at the main circuit breaker before installing, cleaning, or servicing the fan. Failure to do so can result in electrical shock or serious injury.
- Pastikeun sadaya sambungan listrik sasuai sareng kode sareng peraturan lokal, ogé Kode Listrik Nasional (NEC).
- The fan must be mounted to a structurally sound ceiling outlet box marked "Acceptable for Fan Support of 35 lbs (15.9 kg) or less."
- Jaga jarak sahenteuna 7 kaki ti lanté ka bilah kipas.
- Ulah selapkeun objék kana jalur tina bilah kipas.
- Use only the specified light bulb type and wattage (1 x 6.5 watt LED bulb, 60 watt equivalent, E26 Medium base).
- This fan is designed for indoor, dry locations only.
Setup sareng Instalasi
The Litex Celeste ceiling fan is designed for flush mount installation only. Assembly is required.
Ngabongkar sareng Inspeksi
Carefully remove all components from the packaging. Verify that all parts listed in the included parts list are present and undamaged. If any parts are missing or damaged, do not proceed with installation and contact customer service.
Pasang Kipas Angin
This fan is hardwired and requires direct connection to your home's electrical system. Ensure the power is OFF at the circuit breaker before beginning. Secure the mounting bracket to the ceiling outlet box. The fan's installed dimensions are approximately 6.5 inches from the ceiling to the blade and 12.5 inches from the ceiling to the bottom of the light kit glass.
Figure 1: Litex Celeste Ceiling Fan installed in a room, demonstrating its flush mount design and compact size.
Sambungan Wiring
Connect the fan's electrical wires to the corresponding household wires according to the wiring diagram provided in the separate wiring instructions. Ensure all connections are secure and properly insulated.
Ngapasangkeun Bilah sareng Pakakas Lampu
Attach the five reversible white/whitewash blades to the motor housing. Secure the single light kit with the white opal glass dome to the fan body. Install one E26 Medium base LED bulb (60 watt equivalent, not included) into the light kit.
angka 2: Tutup-up view of the Litex Celeste Ceiling Fan, showing the white finish, reversible blades, and the white opal glass light kit.
Parentah Operasi
Your Litex Celeste Ceiling Fan is controlled via a remote control. Ensure the remote has working batteries.
Operasi Kipas
- Hurungkeun/Pareuman: Pencét tombol daya kipas dina remot pikeun ngahurungkeun atanapi mareuman kipas.
- Kontrol laju: Use the speed control buttons on the remote to adjust the fan speed (typically low, medium, high).
- Aliran Udara anu tiasa dibalikkeun: This fan features reversible airflow. Locate the reverse switch on the fan motor housing (usually a small toggle switch). Flip the switch to change the direction of the blades. In warm weather, the fan should rotate counter-clockwise to create a cooling breeze. In cool weather, it should rotate clockwise at a low speed to circulate warm air from the ceiling.
Operasi lampu
- Lampu Hurung/Pareum: Press the light button on the remote to turn the light on or off.
Pangropéa
Pangropéa rutin ngajamin umur panjang sareng kinerja optimal kipas siling anjeun.
- beberesih: Pikeun ngabersihkeun kipas, usap ku lembut, damp lawon. Ulah nganggo pembersih atanapi pangleyur anu abrasif, sabab ieu tiasa ngaruksak lapisan atanapi komponén listrik.
- Perawatan Blade: Periodically check the blade screws for tightness. Loose blades can cause wobbling and noise.
- Ngagantian bohlam lampu: Ensure power is disconnected before replacing the light bulb. Allow the bulb to cool completely before touching. Replace with an E26 Medium base LED bulb (60 watt equivalent).
- Pelumasan Motor: Motor kipas dilumasi permanén sareng henteu peryogi diminyakan tambahan.
Pamérésan masalah
Upami anjeun ngalaman masalah sareng kipas siling anjeun, tingal masalah sareng solusi umum ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Kipas teu ngamimitian | Teu aya daya pikeun kipas; Kabel sambungan kendor; Batré remot kontrol pareum. | Pariksa circuit breaker; Pastikeun sadaya sambungan kabel aman; Ganti batré kadali jauh. |
| Kipas angin ngagelebug | screws sabeulah leupas; wilah henteu saimbang; bracket dipasang leupas. | Tighten all blade screws; Ensure blades are balanced (balancing kit may be needed); Secure mounting bracket. |
| Lampu teu jalan | Light bulb burned out; Loose wire connection in light kit. | Replace light bulb; Check light kit wiring connections. |
| Operasi ribut | screws leupas; Motor hum; Agul-agul ngahalangan. | Check and tighten all screws; Ensure fan is properly mounted; Verify no obstructions are in the blade path. |
spésifikasi
| Fitur | Spésifikasi |
|---|---|
| merek | Litex |
| Nomer modél | CC42WW4L |
| Dimensi produk | 42 "L x 42" W x 12.5" H |
| Warna | Bodas |
| Bahan | Alloy Steel (Fan Body), Glass (Shade) |
| Tipe Pamasangan | siram Gunung |
| Sumber Daya | Kawat kabel |
| Métode kontrol | Kadali jauh |
| Tipe Sumber Cahaya | Incandescent (E26 Medium Base) |
| Voltage | 120 volt |
| Wattage (Cahaya) | 60 watts (equivalent) |
| Fitur husus | Aliran Udara Balik |
| Item Beurat | 9.46 pon |
Garansi sareng Rojongan
The Litex Celeste Collection Ceiling Fan comes with a limited lifetime warranty. For warranty details, parts, or customer support, please contact Litex Industries directly.
Palayanan palanggan: 800-527-1292
