LEDVANCE Halogen 250W T12 Dimmable Light Bulb Instruction Manual

Bubuka

This manual provides essential information for the safe and effective use of your LEDVANCE Halogen 250W T12 Dimmable Light Bulb. This bulb is designed for general use locations and offers a high Color Rendering Index (CRI) of 100, ensuring accurate color representation. It provides 5000 lumens of warm white light at 2950K and has an average lifespan of 2000 hours.

Émbaran Kasalametan penting

• Résiko Setrum Listrik: Always disconnect power before installing or replacing the bulb.
• Résiko kaduruk: Halogen bulbs operate at high temperatures. Do not touch the bulb with bare hands during or immediately after operation. Allow the bulb to cool completely before handling.
• Penanganan anu leres: Avoid touching the glass part of the bulb with bare hands during installation. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves when handling.
• Correct Wattage: Ensure the fixture is rated for the 250W bulb to prevent overheating and potential fire hazards.
• Pamakéan jero rohangan wungkul: This bulb is intended for indoor applications.

Product packaging showing the 'DO NOT TOUCH WITH BARE HANDS' warning, emphasizing safe handling practices for the halogen bulb.

Setup sareng Instalasi

1. Pareum listrik: Sateuacan ngamimitian pamasangan, pastikeun listrik ka lampu dipareuman dina pemutus sirkuit atanapi saklar témbok.
2. Leupaskeun bohlam heubeul: Taliti unscrew jeung cabut bohlam nu aya ti fixture nu.
3. Handle New Bulb: Using a clean cloth or gloves, gently screw the LEDVANCE Halogen 250W T12 bulb into the appropriate G5 base socket. Do not overtighten.
4. Mulangkeun Daya: Sakali bohlam parantos dipasang kalayan aman, balikkeun deui kakuatan ka lampuna.
5. Tes: Hurungkeun saklar lampu pikeun mastikeun operasi anu leres.

Pahareup-hareup view of the LEDVANCE Halogen 250W T12 Dimmable Light Bulb, showing its T12 shape and G5 base for installation.

Operasi

This LEDVANCE Halogen bulb is dimmable, allowing you to adjust the light output to suit your needs. When connected to a compatible dimmer switch, you can control the brightness from 0% to 100%. Ensure your dimmer switch is designed for incandescent/halogen loads.

Pangropéa

• beberesih: Ensure the bulb is cool and power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• ngagantian: When the bulb reaches the end of its life (approximately 2000 hours), replace it following the same installation steps outlined in the 'Setup and Installation' section. Always ensure the replacement bulb matches the specifications of the original.

Pamérésan masalah

• Bohlam teu hurung:
  • Pariksa naha saklar listrik hurung.
  • Pastikeun bohlam geus ngaco dina aman.
  • Pariksa yén circuit breaker teu tripped.
  • Confirm the bulb is not burnt out (average life is 2000 hours).
• Bohlam kedip-kedip:
  • Ensure the bulb is fully tightened in the socket.
  • Upami nganggo dimmer, pastikeun éta cocog sareng bohlam halogen sareng henteu kaleuwihan lampu.
  • Check for loose wiring in the fixture or switch (consult a qualified electrician if unsure).
• Ngurangan Caang:
  • If connected to a dimmer, ensure it is set to maximum brightness.
  • Dust accumulation on the bulb can reduce light output; clean as per maintenance instructions.

Spésifikasi produk

Émbaran jaminan

This LEDVANCE product comes with a garansi 30 poé from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as described under normal use. For warranty claims or further details, please contact customer support.

Rojongan Palanggan

For additional assistance, technical support, or inquiries regarding your LEDVANCE Halogen 250W T12 Dimmable Light Bulb, please visit the official LEDVANCE store or contact their customer service department.

Toko LEDVANCE: Nganjang ka Toko LEDVANCE di Amazon