Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle Instruction Manual

1. Bubuka jeung Leuwihview

The Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle is designed to provide safe and reliable electrical connections in residential and commercial environments. This receptacle complies with the 2011 National Electrical Code (NEC) Article 406.12, which mandates tamper-resistant receptacles in dwelling units to enhance safety, particularly for children.

fitur konci ngawengku:

• Tampdesain er-tahan pikeun kaamanan ditingkatkeun.
• Durable, impact-resistant thermoplastic face and back body.
• Decorator style for modern aesthetics.
• Easy installation with backed-out terminal screws and built-in wire stripper.

2. Émbaran Kasalametan

PERHATOSAN: Risk of electric shock or electrocution. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. If you are unsure about any part of these instructions, consult a qualified electrician.

• Always disconnect power at the main service panel before working with electrical wiring.
• Anggo alat pelindung pribadi (PPE), sapertos sarung tangan insulasi sareng kacamata kaamanan.
• Pastikeun sadaya sambungan kabel aman sareng insulated leres.
• Ulah ngaleuwihan peringkat listrik anu ditangtukeun pikeun alat éta.
• Alat ieu dimaksudkeun pikeun pamakéan jero rohangan wungkul.
• Comply with all local and national electrical codes.

3. Eusi Paket

The package contains one (1) Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle.

4. Pamasangan

Follow these steps for proper installation of your Eaton TR1107W receptacle:

1. Pareuman Daya: Locate the circuit breaker or fuse that controls the power to the outlet where you will be installing the receptacle. Turn it OFF. Verify power is off using a voltage panguji.
2. Cabut Wadah Lama (upami aya): Carefully remove the wallplate and unscrew the old receptacle from the electrical box. Disconnect the wires, noting which wire was connected to which terminal.
3. Siapkeun Kawat: Strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. The receptacle features a built-in wire stripper for No.14 and No.12 wire to assist with this step.
4. Sambungkeun kawat: The Eaton TR1107W receptacle supports side-wire connections and accepts up to No.10 solid wire. Terminal screws are backed out and ready for wiring.
   • Nyambungkeun kawat taneuh tambaga héjo atawa bulistir to the green grounding screw.
   • Nyambungkeun kawat bodas (nétral). to the silver-colored terminal screws.
   • Nyambungkeun kawat hideung (panas). to the brass-colored terminal screws.
   Pastikeun sadaya sambungan kedap tur aman.
5. Wadah Gunung: Carefully fold the wires into the electrical box. Insert the receptacle into the box and secure it with the mounting screws provided. The extra long and extra wide mounting straps aid in stable installation.
6. Pasang Wallplate: Attach a compatible decorator wallplate (not included) over the receptacle.
7. Mulangkeun Daya: Hurungkeun kakuatan deui ON di circuit breaker atawa kotak sekering. Nguji wadahna pikeun mastikeun operasi anu leres.

Gambar 1: Hareupeun view of the Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle. This image highlights the decorator style and the two tampoutlet er-tahan.

5. Operasi

The Eaton TR1107W is a tamper-resistant receptacle. This means it has an internal shutter mechanism that prevents foreign objects from being inserted into the slots. To insert a plug, apply even pressure to both prongs simultaneously. This will open the shutters and allow the plug to enter. If a plug does not insert easily, ensure both prongs are aligned and apply firm, even pressure.

6. Pangropéa

The Eaton TR1107W receptacle requires minimal maintenance. Periodically inspect the receptacle and wallplate for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power at the circuit breaker and replace the device immediately. Clean the surface with a soft, damp lawon; nyingkahan cleaners abrasive atawa pangleyur.

7. Cara ngungkulan

• Henteu aya kakuatan dina wadah:
  • Check the circuit breaker or fuse for the circuit. Reset the breaker or replace the fuse if tripped/blown.
  • Ensure all wire connections to the receptacle are secure. Turn off power before checking connections.
  • Test the receptacle with a known working appliance.
• Plug Difficult to Insert:
  • This is normal for tamper-resistant receptacles. Ensure both prongs of the plug are aligned and apply firm, even pressure simultaneously.
  • Do not force the plug, as this can damage the receptacle or the plug.
• Receptacle is Hot to the Touch:
  • Immediately disconnect power to the circuit. This could indicate an overload or a faulty connection. Consult a qualified electrician.

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information and technical support, please contact Eaton customer service directly. Refer to the official Eaton websitus atanapi kemasan produk kanggo inpormasi kontak sareng syarat garansi anu pangénggalna.

Eaton Websitus: www.eaton.com