Viking Universal Message Waiting Light

Bubuka

The Viking Universal Message Waiting Light (Model VK-LM-1A) is designed to provide a visual indication of a waiting message on compatible telephone systems. This device illuminates a bright red LED when a message is present, offering a clear visual alert.

Catetan penting: This device is specifically engineered for use with PBX/Centrex type office telephone systems that provide a 90V message waiting signal. It is henteu compatible with standard residential phone lines or systems that use a "stutter dial tone" for message waiting indication. It also does not work with all AT&T phone systems.

Produk Leuwihview

The VK-LM-1A is a compact, wall-mountable unit featuring a single red LED indicator. Its simple design allows for discreet placement near a telephone.

Gambar 1: Hareupeun view of the Viking VK-LM-1A Universal Message Waiting Light, showing the compact white plastic casing and the prominent red LED indicator.

Gambar 2: Angled view of the Viking VK-LM-1A, providing a perspective of its overall shape and size, highlighting its unobtrusive design.

Naon anu aya dina Kotak:

• Viking Universal Message Waiting Light (VK-LM-1A)

Setup sareng Instalasi

The VK-LM-1A is designed for simple installation. Ensure your telephone system provides the necessary 90V message waiting signal for proper operation.

1. Identify Compatible Line: Locate a telephone line from your PBX/Centrex system that outputs a 90V message waiting signal. This is crucial for the device to function correctly.
2. Sambungkeun Alat: Connect the VK-LM-1A to the identified telephone line. The device typically connects in parallel with the telephone instrument. Refer to your telephone system's documentation for specific wiring diagrams for message waiting indicators.
3. Pamasangan (Opsional): The compact design allows for placement on a desk or shelf. For a more permanent installation, the unit can be surface mounted using appropriate fasteners (not included) through designated mounting points if available, or by securing it with adhesive.
4. Fungsi Uji: After connection, leave a test message on the connected line's voicemail. The red LED on the VK-LM-1A should illuminate, indicating a waiting message. Clear the message, and the light should turn off.

Warning: Do not connect this device to standard residential telephone lines or lines that use stutter dial tone for message waiting, as it will not function as intended and may lead to misinterpretation of signals.

Parentah Operasi

The Viking VK-LM-1A operates automatically in conjunction with your compatible telephone system.

• Message Indication: When a new voicemail message is received on the connected telephone line and your PBX/Centrex system sends a 90V message waiting signal, the red LED on the VK-LM-1A will illuminate. The light will remain on as long as there is an unread message.
• Ngabersihan Pesen: Once all messages are retrieved or cleared from the voicemail system, the PBX/Centrex system will cease sending the 90V signal, and the red LED on the VK-LM-1A will turn off.
• Incoming Call Indication: The device may also flash when an incoming call is present on the line, but its primary function is to indicate message waiting. Its behavior during incoming calls is secondary and depends on the specific signaling of your telephone system.

Pangropéa

The Viking VK-LM-1A is designed for low maintenance. Follow these guidelines to ensure its longevity:

• beberesih: Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners, aerosols, or abrasive chemicals, as these can damage the casing atawa komponén internal.
• Lingkungan: Keep the device in a dry environment, away from excessive moisture, dust, and extreme temperatures.
• Henteu aya Bagian anu Bisa Dilayanan Pamaké: The VK-LM-1A contains no user-serviceable parts. Do not attempt to open or repair the unit, as this will void any warranty and may cause damage.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

For information regarding warranty coverage, technical support, or service for your Viking VK-LM-1A Universal Message Waiting Light, please refer to the official Viking websitus atanapi ngahubungan layanan palanggan maranéhanana langsung.

It is recommended to have your product model number (VK-LM-1A) and purchase details available when contacting support.

Viking Websitus: www.vikingelectronics.com (Kelample link, please refer to official product documentation for precise contact information)