Bubuka
The CHAMBERLAIN Clicker Keyless Entry KLIK2U-P2 provides convenient, secure, and keyless access to your garage or gate. This universal wireless keypad is designed for broad compatibility with most garage door openers manufactured after 1993 that utilize photoelectric sensors.
This manual provides detailed instructions for setting up, operating, and maintaining your KLIK2U-P2 keypad.
Émbaran Kasalametan penting
- Photo-Eye Sensors: The Original Clicker Universal Wireless Keypad by Chamberlain is intended for use with residential door openers manufactured after 1993 that use photoelectric sensors. Any garage door opener that does not have these sensors installed and working should be replaced.
- Clearance: Ensure all children, pets, or items are completely clear of the garage door before proceeding with the programming process or operating the door.
- Jangkungna instalasi: Install the keypad out of reach of children, at a minimum height of 5 feet (1.5 meters) or 60 inches above the floor.
- Door Path: Mount the keypad out of the path of the moving garage door, but within sight of it.
- Cover Clearance: 4 inches of clearance is needed for the cover to be able to fully open.
Kasaluyuan
The KLIK2U-P2 keypad offers universal frequency recognition, identifying over 90% of all garage door openers installed in North America. It is compatible with major brands and code types, including:
- Billion code 390 MHz
- Security+ 390 MHz
- Security+ 315 MHz
- Kaamanan + 2.0
- Linear MegaCode 318 MHz
- Genie Intellicode 390 MHz and 315MHz
- Stanley SecureCode 310 MHz
Refer to the programming section for specific instructions based on your garage door opener's learn button color or DIP switch type.
Image: Packaging highlighting compatibility with major brands and different learn button types (Orange/Red, Purple, Green, Yellow).
Setup jeung Programming
Setting up your KLIK2U-P2 keypad involves programming a personal identification number (PIN) and syncing it with your garage door opener. The process is wireless and typically takes seconds.
1. Identify Your Garage Door Opener Type
Locate the "Learn" button on your garage door opener. Note its color, as this determines the programming steps. Alternatively, some older openers use DIP switches. Refer to your opener's manual if unsure.
Image: Packaging emphasizing wire-free setup and secure encryption.
2. Program the Keypad
- Select a 4-digit PIN: Choose a personal 4-digit code.
- Initiate Programming Mode: Press and hold the '*' and '#' keys together on the keypad until the keypad stops flashing.
- Lebetkeun PIN: Enter your chosen 4-digit PIN, then press '#'.
- Determine Opener ID: Use the instruction manual provided with your keypad to find the corresponding Opener ID based on your garage door opener's brand and learn button color/DIP switch type. Enter this ID, then press '#'.
- Sync with Opener: Press and quickly release the "Smart/Learn" button on your garage door opener. The indicator light on the opener will turn ON.
- Finalize Keypad Sync: Within 30 seconds of the opener's indicator light turning ON, enter your 4-digit PIN on the keypad, then press and hold the '0' key until the garage door opener lights flash or two clicks are heard.
For Genie and Overhead Door units, press the '0' key twice in the final step.
3. Masang keypad
The keypad comes with a 9V battery pre-installed and mounting hardware.
- Remove the outer cover by sliding it upwards.
- Unscrew and remove the battery compartment cover and the 9V battery to expose the mounting holes.
- Secure the keypad to a smooth surface using the included screws. Ensure it's at least 5 feet (1.5 meters) above the ground and out of the path of the moving door.
- Reconnect the 9V battery, replace the battery compartment cover, and slide the outer cover back down.
Gambar: Tukangeun view of the keypad with mounting screw locations and product labels.
Image: Keypad with the protective cover slid open, revealing the numbered buttons.
Pidéo Setup Resmi
Video: A detailed guide on how to program the Chamberlain universal garage door opener keypad, including identifying opener type and programming steps.
Ngoperasikeun Keypad
To operate your garage door using the keypad:
- Slide the protective cover upwards to reveal the keypad.
- Lebetkeun PIN 4-angka anjeun.
- Press the '0' key. The garage door will activate.
- Slide the protective cover downwards to protect the keypad from elements.
Video: Demonstration of opening and closing a garage door using the Chamberlain Clicker Keyless Entry keypad.
Pangropéa
Ngagantian batré
The keypad is powered by a 9V battery (included). When the battery is low, the keypad's backlight may dim or the keypad may become unresponsive. To replace the battery:
- Slide the protective cover upwards.
- Buka konci sareng cabut tutup kompartemen batréna.
- Remove the old 9V battery and insert a new one, ensuring correct polarity.
- Ganti panutup kompartemen batré jeung amankeun ku screw nu.
- Slide the protective cover downwards.
Perlindungan Cuaca
The sliding cover is designed to protect the keypad from various weather conditions. Ensure the cover is fully closed when not in use to maintain its protective function.
Pamérésan masalah
- Keypad Teu Ngabales: Pariksa batré 9V. Ganti lamun perlu.
- Opener Does Not Function After Programming:
- Ensure you correctly identified your opener's learn button color or DIP switch settings.
- For DIP switch openers, if the opener does not function, try flipping the DIP switches (if a switch was "on" or "up" in step 3 of programming, flip it "off" or "down" and vice versa) and repeat the programming steps.
- Ensure you are within approximately 2 feet of the garage door opener power head during the syncing step for best results.
- Repeat the entire programming process carefully.
- Masalah konektipitas: For better connectivity, ensure adequate Wi-Fi signal is present in your garage before setup, if your opener relies on Wi-Fi for smart features (though this keypad is wireless, not Wi-Fi dependent, strong signal can help overall system stability).
spésifikasi
| Fitur | Rincian |
|---|---|
| merek | Chambberlain |
| Nomer modél | KLIK2U-P2 |
| Warna | Bodas |
| Sumber Daya | Didukung ku batré (1 x batré 9V kalebet) |
| Téhnologi konektipitas | Nirkabel |
| Ukuran barang (L x W x H) | 1.2 x 2.5 x 5.9 inci |
| Item Beurat | 8 ons (0.23 Kilogram) |
| Tipe Pamasangan | Self-Adhesive (Mounting screws also included) |
| Komponén Kaasup | 9V Battery, Instruction Manual |
| UPC | 012381173419 |
Image: Keypad with overlaid dimensions, indicating a length of 11 inches (28 cm).
Garansi
The CHAMBERLAIN Clicker Keyless Entry KLIK2U-P2 comes with a 1-Year Warranty.
Ngarojong
For additional information or assistance, please refer to the instruction manual included with your product. You can also visit the official Chamberlain websitus pikeun rojongan salajengna jeung sumber.
Resmi Websitus: www.chamberlain.com
