Leviton 80732-I

Leviton 4-Gang 3-Toggle 1-Decora/GFCI Combination Wallplate (80732-I)

Model: 80732-I | Brand: Leviton

Bubuka

This manual provides instructions for the installation, operation, and maintenance of your Leviton 4-Gang 3-Toggle 1-Decora/GFCI Device Combination Wallplate, model 80732-I. This wallplate is designed to cover a combination of three toggle switches and one Decora/GFCI device, providing a clean and finished appearance to your electrical installations.

The wallplate is constructed from molded thermoplastic nylon, offering maximum resistance to impact, abrasion, fading, and discoloration. Its smooth face and rounded edges help resist dust accumulation, ensuring a neat look.

Émbaran Kasalametan

PERHATOSAN: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that the power is off before wiring. It is recommended that this product be installed by a qualified electrician. Always follow local electrical codes.

  • Ensure power is disconnected before beginning any work.
  • Use appropriate tools and safety equipment.
  • Do not overtighten screws, as this may damage the wallplate or devices.

Eusi pakét

  • 1 x Leviton 4-Gang 3-Toggle 1-Decora/GFCI Device Combination Wallplate (Ivory)
  • Mounting Screws (typically included with wallplate)

Setup sareng Instalasi

  1. Pareuman Daya: Locate the circuit breaker or fuse box that controls the power to the electrical box where the wallplate will be installed. Turn off the power completely. Verify power is off using a voltage panguji.
  2. Remove Existing Wallplate: Carefully unscrew and remove the old wallplate, if present.
  3. Nyiapkeun Alat-alat: Ensure your three toggle switches and one Decora/GFCI device are properly installed and secured within the electrical box.
  4. Posisi Wallplate Anyar: Align the new Leviton 4-Gang 3-Toggle 1-Decora/GFCI Combination Wallplate over the installed devices. Ensure the openings on the wallplate match the configuration of your devices (three toggle, one Decora/GFCI).
  5. Pelat Dinding anu Aman: Use the provided mounting screws to attach the wallplate to the electrical box. Hand-tighten the screws until the wallplate is snug against the wall. Avoid overtightening, which can crack the wallplate or cause devices to bind.
  6. Mulangkeun Daya: Once the wallplate is securely installed, turn the power back on at the circuit breaker or fuse box.
Leviton 4-Gang 3-Toggle 1-Decora/GFCI Combination Wallplate in Ivory

Image: Leviton 4-Gang 3-Toggle 1-Decora/GFCI Combination Wallplate (Ivory). This image shows the installed wallplate with one GFCI outlet and three toggle switches.

Parentah Operasi

The Leviton 4-Gang 3-Toggle 1-Decora/GFCI Combination Wallplate functions as a protective and decorative cover for your electrical devices. Once installed, it requires no specific operation. The devices it covers (toggle switches and Decora/GFCI outlets) will operate as normal through the wallplate openings.

Pangropéa

  • beberesih: To clean the wallplate, wipe it with a soft, damp cloth. For stubborn marks, a mild soap solution can be used. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
  • Pamariksaan: Periodically check the wallplate for any signs of damage, cracks, or discoloration. If damage is observed, replace the wallplate to maintain safety and appearance.

Pamérésan masalah

  • Wallplate Does Not Fit Flush: Ensure that the electrical box and all devices (switches, GFCI) are properly seated and aligned within the wall. Sometimes, slight adjustments to the device mounting screws can help the wallplate sit flush. Do not force the wallplate into position.
  • Sekrup Henteu Kenceng: Check if the screws are correctly aligned with the screw holes on the electrical box and devices. If the threads are stripped, you may need to replace the screws or use appropriate anchors if the box is damaged.
  • Discoloration or Damage: If the wallplate shows significant discoloration, cracks, or other damage, it should be replaced. While made from durable thermoplastic nylon, extreme conditions or impacts can cause wear.

spésifikasi

merekLeviton
Nomer modél80732-abdi
BahanThermoplastic Nylon
Warnagading
Konfigurasi4-Gang (3 Toggle, 1 Decora/GFCI)
Dimensi produk8.19" W x 4.5" H
Tipe rengseLemes rengse
Tipe PamasanganScrew-In
Item Beurat1.6 ons
UPC078477231159

Émbaran jaminan

This Leviton wallplate is covered by a manufacturer's warranty. For specific details regarding the warranty period and terms, please refer to the official Leviton website or contact their customer support directly. Retain your proof of purchase for warranty claims.

Ngarojong

Pikeun bantuan tambahan, dukungan téknis, atanapi kanggo view produk Leviton anu sanésna, mangga buka Leviton resmi websitus di www.leviton.com. You can also find contact information for customer service on their websitus.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.