Sealey AK993

Sealey AK993 3m (10ft) x 16mm Autolock Measuring Tape User Manual

Modél: AK993 | Merk: Sealey

Bubuka

This manual provides essential instructions for the safe and effective use of your Sealey AK993 Autolock Measuring Tape. Designed for precision, this tape features both metric and imperial scales, an automatic blade lock, and a convenient press-button rewind mechanism. Please read this manual thoroughly before first use and retain it for future reference.

Émbaran Kasalametan

  • Always handle the tape measure with care. The blade edges can be sharp.
  • Do not allow the blade to retract at high speed without control, as this may cause injury or damage to the tape.
  • Jauhkeun tina jangkauan barudak.
  • Inspect the tape for any damage before each use. Do not use if the blade is bent, frayed, or the case is cracked.
  • Avoid exposing the tape to extreme temperatures or corrosive substances.

Disetél

The Sealey AK993 Autolock Measuring Tape requires no complex setup. It is ready for use directly out of the packaging.

  1. Ngabongkar bungkusan: Carefully remove the measuring tape from its packaging.
  2. Pamariksaan: Before first use, visually inspect the tape for any signs of damage during transit. Ensure the blade extends and retracts smoothly.
Sealey AK993 Autolock Measuring Tape with blade extended

Figure 1: The Sealey AK993 Autolock Measuring Tape, showing its yellow and black composite case, wrist strap, and the steel blade extended with metric and imperial markings visible.

Parentah Operasi

The Sealey AK993 features an autolock mechanism for ease of use and a press-button for controlled rewind.

  1. Manjangkeun Bilah: Gently pull the blade from the case. The blade will automatically lock in position once extended, holding your measurement.
  2. Nyokot pangukuran: Position the end hook at the starting point of your measurement. Extend the blade to the desired length. Read the measurement from the top edge of the tape for metric (millimeters, centimeters, meters) or the bottom edge for imperial (inches, feet).
  3. Rewinding the Blade: To retract the blade, locate the rewind button (typically on the underside or side of the case). Press and hold this button to allow the blade to smoothly retract into the case. Maintain a firm grip on the blade to control its speed during retraction.
  4. Using the Belt Clip and Wrist Strap: The integrated belt clip allows for convenient carrying on a belt or pocket. The wrist strap provides an additional security measure to prevent accidental drops.

Pangropéa

Pangropéa anu leres mastikeun umur panjang sareng akurasi pita ukur anjeun.

  • beberesih: Wipe the blade and case with a dry, soft cloth after each use to remove dust, dirt, or moisture. For stubborn grime, a slightly damp lawon bisa dipaké, dituturkeun ku drying langsung.
  • Panyimpenan: Store the tape measure in a dry environment, away from direct sunlight and extreme temperatures. Ensure the blade is fully retracted before storage.
  • Hindarkeun pelumas: Do not apply oil or lubricants to the blade or internal mechanisms, as this can attract dirt and impair function.

Pamérésan masalah

MasalahMungkin Cukang lantarananaSolusi
Blade does not extend smoothly.Dirt or debris inside the case.Gently extend and retract the blade several times. If the issue persists, inspect for visible obstructions. Do not attempt to disassemble the case.
Blade does not retract fully.Blade twisted or obstructed.Ensure the blade is not twisted. Press the rewind button firmly. If the issue continues, do not force retraction.
Autolock mechanism not engaging.Internal mechanism fault or debris.Ensure the blade is pulled out sufficiently for the lock to engage. If the problem persists, the unit may require replacement.

For issues not listed here, or if solutions do not resolve the problem, contact Sealey customer support.

spésifikasi

  • model: AK993
  • Panjang sabeulah: 3 méter (10 suku)
  • Lebar sabeulah: 16 mm
  • Sistem pangukuran: Métrik sareng Kaisar
  • Bahan Kasus: High visibility composite with rubber cover
  • Jenis konci: Otomatis
  • Mundurkeun: Press-button controlled
  • Fitur: Wrist strap, belt clip
  • Beurat barang: 122 g
  • Ukuran produk: 3.9 x 10.4 x 15.4 cm

Garansi sareng Rojongan

Sealey products are manufactured to high standards and are subject to rigorous quality control. For information regarding warranty terms and conditions, or for technical support, please refer to the official Sealey website or contact your local Sealey dealer. Keep your proof of purchase for any warranty claims.

Sealey Resmi Websitus: www.sealey.co.uk

Dokumén Patali - AK993

Praview Sealey ANTBY18 Anti-Slip Tape Installation Instructions
Comprehensive installation guide for Sealey's Black/Yellow Self-Adhesive Anti-Slip Tape (50mm x 18mtr, Model ANTBY18). Covers surface preparation for wood, metal, concrete, and other materials, application techniques, and important disclaimers.
Praview Sealey MOT Tool Board with Tools - MOTBKIT.V1, MOTB.V2 User Manual
Comprehensive instructions and specifications for the Sealey MOT Tool Board with Tools (Model: MOTBKIT.V1, MOTB.V2). Learn about installation, included tools, product specifications, and fitting kit components.
Praview Dispenser Kertas Masking Sealey MK65.V3 Gulungan 450mm - Pitunjuk sareng Perakitan
Pitunjuk lengkep pikeun dispenser kertas masking Sealey MK65.V3. Diajar ngeunaan kaamanan, perakitan, operasi, sareng pangropéa pikeun dispenser gulungan 450mm ieu.
Praview Sealey AK303IMP 45pc Imperial Tap & Die Set Instructions
Detailed instructions for the Sealey AK303IMP 45-piece Imperial Tap & Die Set, covering safety, introduction, operation, and environmental protection.
Praview Sealey LH251 Mini Lever Hoist 250kg Instructions and Safety Guide
Comprehensive instructions and safety guidelines for the Sealey LH251 Mini Lever Hoist 250kg, covering operation, maintenance, inspection, and responsibilities.
Praview Sealey AK303IMP 45pc Imperial Tap & Die Set Instructions
Comprehensive instruction manual for the Sealey AK303IMP 45-piece Imperial split die tap and die set. Includes detailed safety guidelines, product introduction, specifications, and step-by-step operation for cutting internal threads, external threads, and thread renewal. Features environmental protection advice and warranty information.